Best Mod! // 100 Series Land Cruiser LX470

[@landcruiserscotland]

Nice work!

[@cruisinwithgreg]

Thanks 🤙

[@jordynchildress8542]

wow, I have always wanted to know how to change the tail lights on my land cruiser-this is so helpful!! 🎉

[@cruisinwithgreg]

Glad it was helpful!

[@euroviewnzkim6795]

Looks nice

[@davidrussells2006]

Version with the reverse lights at the lowest looks better I think

[@cruisinwithgreg]

thanks! do you have the link for those?

[@NewsBroadcasting]

8:24 does anyone know what the bottom connector is for ( u can see it when takes out the assembly on the body of the vehicle)

[@cruisinwithgreg]

So there is 1 harness that comes out of the body and it splits into the 3 bulbs. I think what you are seeing is that singular harness that provides the cables for the 3 bulbs.

[@oatesandmessina]

Thanks for the video, Greg. Any idea how these look at night compared to the OEM LEDs that came on the 2007 LC?

[@cruisinwithgreg]

Hey! Unfortunately I do not know how they compare.

[@johnbacani2323]

Do you have the link for these? I can’t click the link you posted. Thanks!

[@cruisinwithgreg]

Hey! Sorry for the late response. Does the link work now in the description?

[@Jfgentle]

Did you have an issue with the tail lamp indicator on the dash showing up after switching the bulb to LED’s? I have it showing on my LX470 and I can’t seem to find a way to reset/disable the sensor.

[@cruisinwithgreg]

Hmm. I did not have any issues with the tail lamp indicator. Did you install the same model I use in the video or a different one? It sounds like it is not getting enough voltage and thinks your light is out, since LEDs use less voltage than the standard bulbs.

[@Jfgentle]

@@cruisinwithgreg I think you’re right and that’s exactly what’s happening. They aren’t exactly the same as yours because it’s the LX version but exactly the same scenario coming from the incandescent bulb to the LED lights. Might be a relay or something. I’ll go searching the forums and if I find anything I’ll post it here. Not that you have the same problem anyway…

[@adarianalt]

You should paste between led and socket 560 ohms resistor/0,25 watt and dash lamp will never bother you. Checked and tested on my 2001 lx470 american

[@kotasonamtenzin]

How are the small dot leds holding up ? Have seen tails lights with few failed leds.

[@cruisinwithgreg]

So far so good! No issues. Love them!