BEST Mods For Your Toyota GR86

[@ScottyBeMore]

Its not really the rtv, its the right hand turn oil pressure dip with that said, 1/2 pt. over fill seems to be the best fix atm

[@trxpant]

i’m considering purchasing this car but i been watching many videos and a lot of ppl have been mentioning that. the rtv the oil pressure dip etc. however if i purchase this gr86 with the intention of just using it as a daily driver like going to work would i have this issue you think? like i have zero interest in taking it out to a track nor do i intend to purposely be trying to be driving fast yknow.

[@ScottyBeMore]

I do the 1/2 pt overfill cause it won't hurt nothing only helps and as a daily with some spirited driving you can't push the car hard enough to even come close to hurting it in any way @@trxpant

[@zachariewinn1623]

@@trxpant I own one and as long as you don’t track it, then it won’t be a problem

[@sokmunky4104]

@@trxpant The issues people are having are mainly from pulling a lot of Gs on right turns at tracks. I doubt most people with cars just ask simple questions like "what modifications do you recommend if I decide to take my car to the track and I don't care about warranty I just don't want to blow up my car". Almost always they will say oil cooler and higher weight oil due to heat. Maybe something like 40 weight when on the track for the GR86/BRZ. From what I have seen the easiest solution is literally just getting an oil cooler kit and adding an extra .5-1 quart over fill. That is all you need with the GR86. You can waist money buying a better oil pan/baffles and possibly an accumulator will help, but people are literally just overfilling a bit and it is fixing the issue. So I would honestly just recommend an oil cooler to keep temps down and a light overfill. You should be fine after that.

[@VinRZ]

Alex, you're a really entertaining youtube personal. But for God sake, stay in the drifting scene. Your recommendations on track / autox are just purely comical. No don't get more power, no don't just drop a set of Chinese coilovers in, no don't put aero kit on the car. Get brake pads, brake fluid, and oil cooler into the car. Then, a few events later, you, yes, I mean you (alex), get some camber plates and rear upper control arms. This is all you need if you aren't looking to compete. Tires and rims can come later. Point is to maximize the stock setup. Spend as much money on seat time as possible.

[@yeonboy1]

i dont think anybody who actually knows about cars would follow this mod list

[@PapiJadan]

Hey I’m from BOSTON MA My gr86 engine blew up with rtv it’s currently being fixed right now they just replaced the block now just awaiting for discharge papers

[@WORLDSTATUS-NEWS]

Honestly I’m still inlove either way the stock gr86 I have an awe cat back exhaust and it roars and pops occasionally

[@CruiseControl1]

Best way is to protect this glass engine is treat like a nascar only turn left.

[@Pplwithnoname]

K&n intake and mtec clutch spring were really nice mods i cannot lie

[@Themis187]

the most important is the short shifter😅

[@TheNEMESIS1821]

Thats why i like porsche . You by it and it works out off the box 📦 you don’t need to change anything!!!

[@arefinlabib4630]

but how do you get rid/fix that torque diipp??!!

[@cadkoon2247]

That was only on the 1st gen 86/brz not the 2nd gen

[@Carlos.Rivera]

Force induction or engine swap

[@jaron95]

@@cadkoon2247 It's still there on 2nd gen but it's much more mild. According to dyno graphs I've seen (@StratifiedAuto channel), swapping to unequal length headers will smooth out the torque dip even more.

[@kevind_53]

I gained an average of +3dB accross the mid to upper rpm range when I installed my k&n intake on my first gen BRZ wich is noticeable 🚗💥💨🔥

[@brandyoverly3485]

A mustang II COUP OR GHIA

[@ShichidoYukino]

I better put all Blitz parts

[@burntbean566]

Didn’t say what to get to fix the rtv issue 🙃

[@jaron95]

The Room Temperature Vulcanizing silicone sealant is used in several places across the whole FA24 engine. The "fix" is to remove the oil pan and clean out any RTV stuck in the oil pickup tube once the engine has been broken in. Dassit. No extra parts needed.

[@CPE-j1u]

Can you talk like a normal person???

[@christophe_george]

He does have that 'son of Scotty Kilmer' thing going.

[@robertotejeda1613]

He's fake af

[@literallyfiguratively]

+35 horsepower from a header and a tune 😂😂😂 how do I make it so this channel never shows up in my feed again?

[@subuguru3]

Welcome to BRZ/GR86 life. If you want a fast car get something else

[@agm_99]

Not every car needs 500 horsepower. 250-300 is perfect for this car considering the weight, but unfortunately your rotted brain can’t understand that certain cars are built for different purposes.

[@OriginalLofiBeats]

35 is optimistic, but it's in the ballpark, stock whp average around 200-210 header and tune average around 225-235 on the dyno

[@itisallaboutspeed]

as a car content creator i approve this video