Best Mora Companion Knife Mods

[@themightycrixus1131]

I know its just a cheap Mora but idk about grinding a divot in the spine. Just use the knife to cut a notch into a stick and you can do the same thing without comprimising the tip of your knife that you seem to be building a survival kit on...

[@temperedstate8963]

Really good. I'm an electrical contractor, so I have no shortage of electrical tape, but I watched and went to the store and bought an inner tube. Great idea. So practical. Also the way you did the cord with the plastic keeper. Very practical.

[@westcoastwoodsman2289]

Thank you. I just watched your "Another Get Home Bag, But It's My Bag" video again and it has motivated me to try and do one of my own.

[@BretCahill]

Maybe put the bow drill grommet on the side thats visible when the knife is in the sheath. Cause if I'm using the knife to hold down the drill I want the knife in the sheath for safety while working the bow with my other hand.

[@westcoastwoodsman2289]

That is a good idea. I flip the knife over and put it back in the sheath while trying to use the bow. Doesn't fit great but still covers the blade. To be honest I haven't had a lot of success with the bow method of fire starting. I live in a very rainy part of the world so it's pretty much a last resort.

[@BretCahill]

@@westcoastwoodsman2289 I can understand that. Bow drill will always be special to me because it was the first method I was successful at when I was learning fire making techniques.

[@melyssa8585]

I use a piece of silicone straw for the ferro rod tubing and wrapped everything in electrical tape rather than a piece of inner tube slightly thinner/lighter plus now I have tape instead of the tubing so it’s more expendable and no glueing required I did this mod to my garberg I did not add the brass or the hole in the blade I feel like it’s not worth it to weaken the blade enough to pick things up, a stick or gloves or anything else is a better option imo. And since the garberg does have a 90 deg. spine no filling necessary. I also have the morakniv spark and the mod I’m thinking of trying on that one is adding a small pouch for a multi tool or maybe tinder/sharpener

[@user-xk3lx5rv2h]

Saturday 16 November 2024 09:35 Hr. Thank you for such an informative and well executed video regarding the MORAKNIV COMPANION sheath and your favorite ferro rod attachment system. Material, tools, and information. The three most important things needed to be successful at any task. And your video encompassed all three of those aspects. Good job, well done, sir. 🎉 Hope this comment finds you doing well and that time is being kind towards you and your family. Do you have any information on how to use the MORAKNIV COMPANION belt sheath oval suspension holes that reside on the back of the knife sheath belt suspension loop?

[@denisdrozdov424]

RUS: Если добавлено огниво, то вместо паракорда можно использовать джутовую или пеньковую веревку 2-3 мм в диаметре, её можно использовать в качестве растопки. Еще и стоит раз в 5 дешевле, рулона хватит на много лет.

[@MissB74]

Hi, silly question here, but what is the pipe plug used for? I love all the other mods and will be using them on my Mora as well as my niece's. Thanks for the video!

[@westcoastwoodsman2289]

Thank you for watching. The pipe plug is used as a block for the top of the spindle in a bow drill set up. I made a short demonstration video today and posted it.

[@MissB74]

@@westcoastwoodsman2289 Thanks!

[@westcoastwoodsman2289]

@@MissB74 you're welcome :)

[@samdeur]

@@westcoastwoodsman2289cool was wondering what the pipe plug was for 😊

[@badnana1833]

Finally found this again!!! Was absolutely positive I subscribed the first time I watched this and saved this specific video to do this later but alas the YT gods decided to make me work hard for it... Over 2 weeks to find this video again!! So happy I did (ended up watching way to many with people using electrical tape for everything ~ when electrical tape is in a vehicle wrapped around anything in an emergency bag for say 2-3 years when YOU decide it cannot wait any longer to checked because husband won't ~ and the tape has slid (melted) and left sticky residue that even the most OCD clean everything person cannot remove my search brought me to the best video ever ~ yours).

[@westcoastwoodsman2289]

Thank you for watching. I'm not a fan of electrical tape either. It makes a real mess if it gets too hot in the sun or wet in heavy rain.

[@patterguitsit7124]

Hi, what is the purpose of the pipe plug? Push nut?

[@patterguitsit7124]

Figured it out: It serves as a bearing block for friction fires.

[@andyryland5369]

Particularly liked the pot lifting mod, will be copying that one thanks

[@westcoastwoodsman2289]

You're welcome! Camping season is here, I hope it comes in handy.

[@Averyuh]

you could replace the bicycle tube with heat shrink tubing to fix the size issues! : )

[@user-bh3ew6ii4g]

Very nice and creative mods, and you demonstrate and you explain it very clearly. Thank you!

[@westcoastwoodsman2289]

You're very welcome!

[@tompeterson2897]

Try electricians shrink tubing for the sheath. Great idea.

[@westcoastwoodsman2289]

That would definitely work.

[@_IDFK]

I was just thinking that! 🤓😎 Although the bike tube is also a cunning plan - new Mora owner & loving these modding ideas generally 😌

[@angelasinclair6343]

Love the trick with the bike tube. Keep the videos coming!

[@westcoastwoodsman2289]

I am glad you liked it! I will.

[@bsd9230]

Great Mods !🎉 What brand of Fire Steel is that? Perfect fit. I want to get the same

[@westcoastwoodsman2289]

Thanks! I'm almost certain it's a generic Coghlan 1005 fire steel. I'm in Canada, so I just get ferro rods from the dollar store or Canadian Tire. I think the fire steels are all made in the same place. They all have the same dimensions, just the names on the packaging are different.

[@hiluxafrica]

Instead of the bicycle tubing can you not use heat shrink wrap"?

[@westcoastwoodsman2289]

Thank you for watching! You definitely could use large shrink wrap. I like to use bicycle tube because you could use it to make bands or burn it if needed. Use whatever you have handy to fasten the fire steel to the sheath. Its most important thing is to have the fire steel attached and with the knife when you need it.

[@kennethmcdonald9736]

I had the same idea a log time ago, but I found I had to slice horizontally all the way down the tubing or the firesteel got trapped in the tube

[@westcoastwoodsman2289]

I've been able to get the fire steel out when i have needed it but it does get to be a bit of a struggle sometimes.

[@garymeldrum949]

Outstanding sir! Very nice but unique mods. Will be redoing mine with your method for sure. Subbed too

[@westcoastwoodsman2289]

Thanks for watching and subbing! I'm glad you like the mods.

[@samdeur]

Nice vid really enjoyed watching your creativity 👍👍👍

[@johnnythompson83]

I like the craftsmanship. What's the brass plug for?

[@westcoastwoodsman2289]

Thank you. The brass plug is added so you can use the knife handle as your block when using a bow drill. I will edit the video and add that information soon.

[@westcoastwoodsman2289]

Johnny, I made a short demonstration video that explains the plug a little better. Again thank you for bring it to my attention that it was not explained in this video.

[@samdeur]

Thanks for telling us the 6.5mm because hearing 730seconds .. i was like what the hell is that hahah.. greetings from the Netherlands..

[@westcoastwoodsman2289]

If America would just switch to the metric system, it would make their lives easier! 😁

[@adammcguinness9950]

I added a ferro rod, duct tape, a heap of paracord, fishing hooks, water purification tablets, fishing line and more. It was far to chunky so I removed it all. I now have a bare sheath again. I did my spine at 90 degrees.

[@quinntheeskimooutdoors6234]

Looks good. Thanks for showing us.

[@westcoastwoodsman2289]

No problem 👍

[@MegaSkyline69]

I stole every single one of these ideas. Thanks 👍👍😆

[@westcoastwoodsman2289]

You're welcome! :)

[@nasko696]

Instead of bicycle tire piece, why not use a shrink tube? It will fit perfectly once heated

[@westcoastwoodsman2289]

That is a good idea. It would give it a cleaner look too. I'll try it out.

[@georgenewlands9760]

The butyl rubber of the inner tube can also be shredded and used as tinder...you obviously have the fire cord but you can just use bike inner tube to attach the ferro rod to the sheath for emergency use.

[@tagTEAM53]

Is that 3/8 inch inner diameter for the clear PVC tube? And what width of firesteel do you use to fit well? Thanks so much!

[@westcoastwoodsman2289]

Sry Max, I missed this question somehow. The tube is 3/8 inside diameter and th firesteel is just slightly smaller than that so I would guess 5/16th. Wish I would have caught this sooner. I hope your mods worked out anyway.

[@zaclapz4890]

U deserve way more subs

[@westcoastwoodsman2289]

Thank you for saying so and thank you for watching. Hopefully I can put out some more videos soon.

[@mybusiness1254]

which ferro rod are you using here

[@westcoastwoodsman2289]

Just a regular Coghlans type ferro rod. The handle that Coghlans uses is a generic type that most of the "cheaper" ferro rods come with. They all nest nicely with the Mora sheath.

[@perry2768]

Why ?

[@mrgooddeeds3115]

Very well thought out thx.

[@westcoastwoodsman2289]

Your welcome. I hope the mods come in handy.

[@christopherskipp1525]

Why doesn't your handle hole go through both sides of the handle?

[@westcoastwoodsman2289]

It is meant to be used as a block for a bow drill fire making set up. I have a video link in the description. Video isn't great but it demonstrates the idea.

[@christopherskipp1525]

@@westcoastwoodsman2289 OK, that makes sense.

[@LostInOzMedia]

G'day, Great video mate, I will be using these mods on my mora, cheers

[@westcoastwoodsman2289]

Thanks for watching.

[@MrAlexH1991]

I think I’d rather just use a sturdy forked stick or limb to get a pot outta the fire. I get that you have your reasons, but to me personally? Idk man, I just don’t like the idea of jimping the tip of my knife.

[@mccalltjtm]

Very cool!

[@westcoastwoodsman2289]

Thank you for watching.

[@alessandrofirmani700]

Compromise the strenght of your blade so you can list of a pot of the fire like you could with a stick? Mmmmmm no thanks, i sugest a hairband in the belt holder to secure the knife to the sheath, verynice video thanks

[@westcoastwoodsman2289]

Thanks for watching. I like the hair band idea. I will give it a try. I suppose the notch does compromise blade strength but I haven't found it to be an issue for me yet. Ymmv as I do baton lightly on occasion but I don't usually use my belt knife for heavy work. I hope you find the other mods useful.

[@douglarsen9179]

Please learn how to use and aim camera

[@westcoastwoodsman2289]

Thanks for the advice. I'm just a guy with a gopro strapped to his head :) I am trying to get better at filming and editing but it is a slow process for me as most of my experience is related to outdoor work / activities and not in technology.

[@smsgtbulldog]

Nicely done!!!

[@masgiver]

you must filing patent for this design #kidding

[@westcoastwoodsman2289]

Maybe the folks at Mora will watch the video and put out a modified version of the Companion for us 😀

[@insanodeathguy2160]

My mora looks smaller irl

[@westcoastwoodsman2289]

Looks bigger in the video because I have small hands :)