Best Motorcycle Center Stand For 2023? Paddock ConStands Power-Evo Setup Test

[@stealthman9203]

Just got back in the game by buying this bike and was looking for front and rear stands. Saw this one online, but wasn't sure about it. I just learned everything I needed from your vid. I'm about to order one. Great job.

[@cyclevybz]

Thanks, and congrats on the new bike. 🏍️

[@YoloVib3s]

That jack is legit ...personally I'd have to powdercoat that piece that goes on the bike. That chrome stands out a lot.

[@cyclevybz]

True!!! I’ll probably end up doing that. 🍻

[@oldbronco7340]

Ive been looking at the CB1000r and found your channel. Love the videos and they’re really well done!

[@cyclevybz]

Awesome!! I’m glad to help. Good luck in CB search

[@shanebernard844]

Love your content as always bro. I swear every time I’m looking at buying something you got a video on it and it helps guide my decision. You need affiliate links!

[@cyclevybz]

I appreciate you 🙏🏾…trying to make it to 1k subs 😂

[@shanebernard844]

@@cyclevybz you’ll definitely end up getting there. I’m going to share some of your content to the cb1r groups I’m in.

[@cyclevybz]

@@shanebernard844 I appreciate it!!

[@michaelkriemer7886]

I´m using the the same Stand in Black for my CBR R

[@alexdb77]

Great Garage Man! Beautiful Bike and very useful review! Considering a center stand Cheers

[@cyclevybz]

Thanks! 👍 let me know if you have any questions

[@indospartan]

Love the nike air Jeruzalem. On a serious note, nice centre stand.

[@cyclevybz]

😂

[@adlikifli9302]

The best stand so far

[@mendingmotos]

Thanks man only us based review of this thing. Super helpful.

[@javierjaimerodriguezquinta9440]

Donde compraste el full system

[@tripzuki7462]

Nice video and product! I use a ABBA Skylift for my Hayabusa and my SV650. I usually use my rear stand to support the bike before attaching the ABBA, that way I don’t have to try balancing the bike while I line it up. Don’t know if that would be possible with this stand.

[@Smoke-ri1fx]

Can you tell me the adapter part # for your cb? I received mine today and im certain they sent me the wrong part. Thanks!

[@pennyrivosta7052]

Hi,Thank you for the video,was very helpful,although I also encountered the problem with the piece you said you had to get in order for the upper pin to be secured to the bike,did you get that part from the manufacturer as well or can I get it here in the states? Thank you in advance for your answer,I appreciate your help,Take care.

[@TheAnkshah]

Good video, I have a 2023 Full throttle scrambler I am trying to figure out if I need a adapter plate. I looked on their website it all says "without adapter plate." It is a bit confusing to see how it will fit on to my bike.

[@akairmen82]

I was going to buy this one for my CB but decided one the ABBA super bike stand instead. I would consider this one for winter storage though

[@sandygomez-leon6254]

Wonder if you can mount the bracket on the other side and keep the kickstand down, if the bike configuration allows that option.

[@cyclevybz]

That’s a good idea

[@mattiasangalli7711]

Hi buddy ! I bought the exact same easel, but I'm paranoid Is there a risk that the bike frame could bend? Or that the pin breaks and falls? I'm undecided whether to keep this or buy one for the steering head, let me know!!

[@allenpearson9716]

Does the kit come with the special socket? Is the socket specific for a specific bike?

[@cyclevybz]

If I remember correctly, I had to specify my bike type during the order. I came with the socket.

[@claudiogaleno]

se puede poner en la gilera gp 800 ?.

[@daig54]

Do the pegs have a lock that lock the bike in or is it just on there by the motorcycles own weight. Curious as to whether it’s sturdy enough to work on the motorcycle for tire changes and such?

[@cyclevybz]

The jack does a have a lock that keeps it from being released by accident.

[@stealthman9203]

Coming home from work, today, I see a van creeping by my house, towards me, pulls over and the passenger gets out and watches me drive by and stop at my house. I pull up to my gate and see a large package sitting out in broad daylight. I get out, grab the package, open the gate, and as I am getting back in my car, I see them pull away. Dudes were going to come back and steal it if my timing wasn't right. I doubt they own a '23 CB1000R Black Edition, so this stand and adapter wouldn't do them any good. Idiots. Took me about an hour to put it together and make the adjustments to get by bike up in the air. First try was definitely sketchy. I recommend that if you have a second person available, take advantage of them to assist with keeping the bike upright. That top lug is the tough part about getting it to work. Did it two more times, tweeking a little bit. I was hungry and called it quits. I'll try to adjust that top lug that final mm that it needs to slide in a little easier, tomorrow. Other than that, very impressed with the ability to lift a 450+ lb bike in the air with one pump, and roll it around. Good German engineering, which is where it came from, for the guy that was asking on a previous reply.

[@cyclevybz]

Yes, the first lift is definitely sketchy 😁. And yes, I had to fine tune the angle and height just to get it just right.

[@512460]

I just saw your video I used the same site and selected Bank TRANSFER as payment method But it processed the order without my card details. And to be honest I only clicked it to see what it would do... Lol then it straight up ordered it.

[@Mikkel111]

Did you get the stand?

[@512460]

@@Mikkel111 if you're asking me then the answer is no. They required payment first however they didn't offer this information I had to email them asking where to make the payment to along with other things and I didn't like this. That all this information wasn't readily available and that I had to email them to get this information. Also when they sent me confirm email the order number didn't even match the one I had. Also the name of account holder for payment details was different from the first person I was told to send the money to in Germany.

[@PhillipGreer-z6n]

Does this one fold in half for storage like the previous classic model?

[@cyclevybz]

No, it only lowers

[@humblebee-nj]

Thanks for the video. I just ordered mine. They r having 35% off

[@cyclevybz]

Nice!!

[@512460]

Did you receive it

[@humblebee-nj]

@512460 i did! And it works, but like it was mentioned in the video, the bike is heavy and it wasnt easy to hold the bike and push the stand at the same time cuz the two pins have to be perfectly leveled with the holes, otherwise it wouldn't go in..

[@512460]

@@humblebee-nj sorry if you don't mind which payment method did you use? Also did you see the bank transfer option?

[@duderandom7908]

Where are you guys located? I used the link in description, and the website doesn't include the US

[@cyclevybz]

I’m in Florida, I had no problem when I purchased it but a couple people have reported that they cannot order it because of geo restrictions

[@FLASHBANG1622]

Yo, did yours come with the adapter plate ? I see the adapter plate as its own thing for my Rebel 1100 and I’m now I’m confused lol

[@petergriffin8681]

Here’s my order for my wife’s 1100 A140334 CS Power Evo Honda Rebel 1100 21-23 sw 03.10.2023 That a140334 model number was the stand and plate

[@FLASHBANG1622]

@@petergriffin8681 hey man I just got to use the lift today, but it doesn’t pick up both tires fully, the front tire is still touching the ground a tad. Do u have the same problem?

[@petergriffin8681]

@@FLASHBANG1622no I have mine set for max lift though.

[@pree-disposedtodiy1401]

I’m really struggling to get mine to work. Got the adaptor plate and for the life of me I can’t get the pins to fit the slots - seems to be a few millimetres out and I’ve tired to adjust and readjust, loosened all the bolts. Slowly tightened them and still can’t get those pins through both slots at the same time. Any advice would be really appreciated 🙏🏽

[@cyclevybz]

Sorry, just now seeing this. Were you able to figure it out?

[@ClayGreen]

HEY! Can this thing lift from both sides? Or are you stuck to kickstand side only??

[@cyclevybz]

Unfortunately you are stuck with this being on the side with the kickstand. I thought about that when I first started setting this up too.

[@markbenson7670]

How do you fine the tank side protectors

[@cyclevybz]

Got them from Ali express. I’ll see if I can find a link for you

[@markbenson7670]

@@cyclevybz are they any good

[@cyclevybz]

@@markbenson7670 the current one is pretty good but the other one was garbage.

[@markbenson7670]

Any up date on the bmw .I went to my main dealer and saw both models m and m comp very nice

[@cyclevybz]

@@markbenson7670 Damn, really? Where do you live. I may have to take a trip lol

[@mynehutmel]

I am trying to place an order, don't see an option to ship in US. Do they not ship to US?

[@superholdembros2022]

Dude it took me DAYS to get the website to work keep trying eventually it will I’m from PA and I finally got the order to process yesterday!!

[@cyclevybz]

Yes it did for me. I'm not sure what changed.

[@start4ever954]

is this matching with 2022 CB1000r?

[@cyclevybz]

Yes

[@start4ever954]

@@cyclevybz I just got mine delivered, but I find it is difficult to aim the two holes at beginning. And also hard to take out

[@petergriffin8681]

Instructions included aren’t very clear. Are you supposed to tight the bolts holding the arm to the dolly in a tilted position or straight up and down? My wife’s rebel 1100 just slides right out of the pins when lifting…

[@cyclevybz]

So it is kind of tricky, but you are suppose to secure the bolt with the bike almost upright, slightly tilting towards the jack. When the bike is jacked up, it should be at a slightly angle which will prevent it from sliding off. Kind of hard to explain

[@petergriffin8681]

@@cyclevybzmakes perfect sense my man! I initially locked it down plumb and when I lifted the bike it began sliding off the main “pin” (the larger pin) and ended up stripping it straight out of the plate. Plans in place to drill and tap through the center of that pin and bolt from the backside similar to how the lower pin is bolted through…

[@superholdembros2022]

Tried to buy on the website but gives me no options for USA checkout. Kinda disappointed cause I wanted this.

[@cyclevybz]

Yeah I’m not sure what changed.

[@darks1973]

You have to select PayPal or Amazon payment on the item itself to checkout. No option from the cart which is very weird. Anyway I just ordered one.

[@spktylr]

Where are you located, because on their site it doesn’t ship to the US? They have a US site, but they’re almost double the price lol.

[@cyclevybz]

I’m in Florida, I was able to get them to ship from overseas.

[@spktylr]

@@cyclevybz I’ll try contacting them. Thanks

[@fulano787]

I just ordered them as well and I live in Florida. I’ll comeback and let you know how things went

[@spktylr]

@@fulano787 I sucked it up and ordered from the US site. They had a good deal for Black Friday too.

[@fulano787]

@@spktylrshould be here this week

[@nulla9601]

Is there any advantage of using regular front and rear stands instead of this? This seems more practical and it's cheaper than a quality set of regular stands

[@cyclevybz]

Maybe the only thing that I can think of is the fact that it’s located directly under the middle of the bike. But this stand gives you way more flexibility

[@trwalker]

It's very nice🥰.how can I get it?😊

[@cyclevybz]

Check description

[@impostermt4219]

😮

[@pgVeritas]

The Abba Skylift is far superior, better built and offers 3 positions: Wheelie, Stoppie or Level. It's more expensive, but your bike is more secure, so secure you can sit on it.

[@petergriffin8681]

Yeah but they have a much smaller list of compatible bikes than ConStands

[@pgVeritas]

@@petergriffin8681 I think they have fitting kits for every single bike that has a swing arm. Heavy bikes like HDs they have a cradle type lift, but that will only raise horizontally. In fairness, the constands is cheaper, but it also looks very flimsy and requires screwing adaptors into the frame...something that may cause a problem. Add to that Abba have been around for 25+ years, are a British company, and I know that you basically get what you pay for.

[@markbenson7670]

Not a fan of the mounting. I use a adda stand .

[@t.m9341]

how do you buy it

[@vincentmamotos9937]

why not get a bursig

[@t.m9341]

not a bursig?

[@cyclevybz]

It may be, just rebranded

[@t.m9341]

@@cyclevybz I can't get a hold of bursig to ask them what stand model to get so I'm getting an Abba but Abba said yestersay that they're outta stock for 5 weeks

[@tommyparbst]

Motea just Got so bad comments on trustpilot though they were fakesite to be honest 😮

[@Mr450pro]

Great product, but no way I’ll ride around with that adapter plate, it ugly as fudge

[@cyclevybz]

😂

[@dougiequick1]

LOL why do you keep calling it a "jack stand"? It just bugs me diluting and ruining perfectly good normailly understood words and terms I mean someone says "jack stand"? Those typically come in pairs and have 4 angular legs and are used to support a vehicle or whatever once jacked up they have holes or groves as to be quickly adjusted to needed heights THOSE are "jack stands" lol ....man there are so many terms and words under attack people just calling stuff whatever suits their fancy at the moment bugs me to no end! I keep coming accross "sportsbike" being applied to WHATEVER including damn goldwings even! DAMN! Or how about "coupe" everyone always understand that to be two door hard top but now A hole manufacturers are marketing FOUR door cars as coupes! Eventually diluted to mean nothing but some kind of car who knows what. okay ranting is over stepping off my soupbox removing fool hat carry on

[@cyclevybz]

Understood 😂