Best of RC Dozer KOMATSU D65WX-17 pushing hard soil

[@TheRealRCSparks]

WOW, WOW, and WOW! I LOVE iT! :~) Thanks for sharing.. and GREAT Film job!

[@RC-TRUCK-ACTION]

Thank you! The STAHL dozer is good, the FUMOTEC is state of the art. ;-)

[@michldreier]

Jetzt heisst es warten, warten.... Sieht super aus!!

[@RC-TRUCK-ACTION]

Das stimmt. Was freue ich mich auf den Bausatz. :-)

[@RCCambodiaOfficial]

Wow RC

[@gloriacrittenden2130]

Where do you get the Komatsu dozer im a big fan or all types of rc

[@seangall5926]

Where did you get that bulldozer? Does it come a controller? Does it come with a battery?

[@Gasteraner]

super mit dem 6-wege schild !! vg

[@RC-TRUCK-ACTION]

Finde ich auch erstklassig - macht so viel Spaß! :-)

[@fendtman8243]

AWESOME POWER!!!

[@RC-TRUCK-ACTION]

That's right. Compared to the real thing, it might be even more powerful. ;-)

[@LaderfahrerZL4001]

Sieht wirklich gut aus.

[@RC-TRUCK-ACTION]

Absolut. Endlich wieder eine Raupe - aber was für eine! :-)

[@cranberryvalleyrr4579]

Cool Video!

[@RC-TRUCK-ACTION]

Thank you! :-) This little machine is amazing.

[@ItsTrollen]

Where do you get one of these at?

[@kinghauler1973]

Klasse Video, da muss Ich wohl wieder sparen! ;-)

[@RC-TRUCK-ACTION]

...geht mir nicht anders - ein super Modell! Freut mich, dass Dir das Video gefällt. :-)

[@izuwanismail7422]

kinghauler1973 7ùjģ ll0

[@slow6.7]

This is old vid if u reply thx but were can I buy this because I’ve looked but can’t find it.

[@RC-TRUCK-ACTION]

Please checkout fumotec in Germany. Thanks for watching!

[@RCNordbauAG]

Sehr geil

[@RC-TRUCK-ACTION]

...finde ich auch - endlich eine richtige Planierraupe! :-)

[@RCNordbauAG]

RC Construction Channel und der kettensound ist toll. Hast du schon bestellt? ;)

[@RC-TRUCK-ACTION]

...hab ich. :-) Wie siehts bei Dir aus?

[@RCNordbauAG]

RC Construction Channel dito :-D

[@RC-TRUCK-ACTION]

Super! :-)

[@baileywright21]

Does the kit come with everything you need or did you have to supply extras? Great video by the way

[@RC-TRUCK-ACTION]

Thanks for your feedback! :-) It`s not a RTR-Kit - you need radio, receiver, battery, ESC, and some smaller parts. Greetings, Bjoern

[@baileywright21]

RC TRUCK ACTION Anytime, Really enjoy the videos! Been looking at these machines and researching for a while now. For someone new to rc would it be difficult to buy this machine and paint and assemble. Although I don't know much about RC i happen to know a lot about construction and equipment as its a family business! Thanks for the help!

[@RC-TRUCK-ACTION]

You`re welcome. The best way to find it out is: Just do it! :-) I will get a kit by the beginning of October and show on my KZbin Channel, how to build it. Maybe this is a chance for you, to come closer to this great hobby. :-) Thanks for your feedback. Greetings from Germany, Bjoern

[@baileywright21]

RC TRUCK ACTION Thanks for all the Help!!

[@daanstam6697]

omg that is amazing is it plug and play or do you need to make it

[@RC-TRUCK-ACTION]

THX! :-) It's a kit, that needs some time to make it.

[@daanstam6697]

RC Construction Channel i wish it was less expensive do

[@RC-TRUCK-ACTION]

RC4WD started to produce in China - these models are a bit cheaper - maybe you could check it out? Greetings, Bjoern :-)

[@daanstam6697]

RC TRUCK ACTION thanks bjoern i got a look at that website some time a go and they are indeed a bit cheaper but as a kid with the age of 13.....:P but i am shure my time will come and than this one will be cheaper as well :) :)

[@RC-TRUCK-ACTION]

daan stam Good point, I have my fingers crossed. :-)

[@noisjack2114]

yeaa

[@trentmarconi4280]

Also one more thing, that model D65WX has WIDE pads and that is also why you can't push as much as with NARROW pads D85ex. The ground pressure between these two is significant. I think I will go with narrow pads so it can maximize brute force. Wide pads are much better suited for muddy or very soft soils, but I admit they do look better.

[@RC-TRUCK-ACTION]

Trent Marconi Thank you for these great details on the real thing! Best wishes from Germany :-)

[@MrRCrican2]

I may have miss the release date. I would love to get one.

[@RC-TRUCK-ACTION]

It wasn't released until today, so you didn't miss anything. :-) Actually it can be ordered, but the first kits will be available / delivered someday in October. Greetings, Bjoern

Sieht ja ganz gut aus. Sind dann mal gespant.

[@RC-TRUCK-ACTION]

Danke! Bin ich auch. :-)

[@trentmarconi4280]

Realistic RC dozer you got there, not bad at all. I have operated a D65ex for about a year and it's close to the real thing but you should be able to fill your blade up ALOT more granted you only have a straight blade but still. That model is 22 lbs so you actuallyhave more weight for it's size. A d65 with fluids and multi-shank ripper is about 50,000 lbs / 14.5/14.5/14.5 = 16 lbs. Maybe the electrical in there is underpowered or maybe it could use a better gearing ratio? I plan on making a cross between a 575A komatsu and a D8 Dozer, best of both worlds and it will weigh around 80 lbs + 10:1 ratio. It will have a full U blade with variable speed controller. Has two five-inch DC motors with gear reduction finely tuned for brute force. Steel frame and cutting edges for blade and ripper teeth will be made out of old dozer cutting edges trimmed way down. I'll cast each track pad separately out of aluminum and cast blade out of either white brass or yellow brass just because I can and will never see that much wear to wear it out. Ripper shanks can also me solid brass. I have enough room in the hull area to make a custom battery pack of 72 rechargeable AA with one inch space in between each battery for heat dissipation. For the hydraulics I was going to use a 12 volt sprayer pump with pneumatic lines and cylinders with oil but takes up too much room in the hull so going to make custom servos on cnc machine and use the pneumatic cylinders with that. If they aren't strong enough and break I'll make some rams on the lathe. The front end will look like that of a D575 komatsu front end and a rear of a D8 Cat. The 575 will have to be balanced and scaled down much further to match that of a D8 then both reduced 10:1

[@RC-TRUCK-ACTION]

Trent Marconi Thanks!!! C o o l details! Best wishes

[@seano7984]

Do you know if they can import one to the us?

[@RC-TRUCK-ACTION]

You can. Many have already been shipped to the US. Just get into contact with the company. Greetings from Germany, Bjoern :-)

[@clotildetriplaxel592]

super jusqu'a la retraite

[@arealassassin]

This unit seems to try to push at what I would consider "transport" speed, could it possibly benefit from a gear reduction, to exert more force when pushing? Anyone, operators?

[@RC-TRUCK-ACTION]

+arealassassin Absolutely. Newcomers always operate at high speed. ;-) You should find other videos on my channel - they look more realistic.

[@polskiogorki7019]

+arealassassin YEs it looks geared too high, technically it only needs to be 16.6 lbs for the size so it looks heavy enough. Id guess needs to be lower geared and more power because the tracks stop dead. If tracks spin then needs more weight.

[@polskiogorki7019]

+arealassassin +arealassassin YEs it looks geared too high, technically it only needs to be 16.6 lbs for the size so it looks heavy enough. Id guess needs to be lower geared and more power because the tracks stop dead. If tracks spin then needs more weight. But at 4399.00 Euros I'd expect a bit more and have a blade ful without stopping like that every time.

[@tatedavidson869]

how much did that komatsu d65wx-17 cost

[@RC-TRUCK-ACTION]

+tate davidson The kit is around 5k EUR.

[@kababatabros4233]

Bundooozerrrrrrrrrrr

[@ggsmith099]

What does one cost I want one later brocephus! 😎💨

[@RC-TRUCK-ACTION]

Thank you for your comment! Please checkout fumotec in Germany. Thanks for watching!

[@trentmarconi4280]

One more thing, I think your dozer should be geared down a bit more also, seems like you're running between Gear two and gear 3 in a real dozer. Your power bandwidth goes right out the window in third gear. At that point you can level but not really push much. Having operated both the d65 six-way blade and the D85 ex semi-u-blade for a few years I can tell you I much preferred the semi U Blade and don't miss the 6-way. Much rather have more dirt to play with and stay in the blade however the 65 was nice for finishing small jobs. If I need more dirt on one side than the other I can just do a quick flick left or right while moving forward to get the right mix. I've always wanted to play with a full U Blade so I'll be going that route, cheers!

[@RC-TRUCK-ACTION]

Thank you so much for your great comment - I appreciate it. Seems to be that you really know what you're talking about. unfortunately, I never had any contact with the real thing. Still trying to let it look as real as possible - but having much room for improvement. Did you see the green / white KOMATSU? Best wishes from Germany

[@polskiogorki7019]

+RC TRUCK ACTION Yes I have seen the green and white Komatsu, looks very realistic and looks high quality, I think it was around 11k euro? Curious to see how that one performs out in the sandbox or on a real jobsite, which is where I'll be taking mine

[@S.C.E_construction]

How much are these going for right now

[@RC-TRUCK-ACTION]

Something about 5k - without radio. Greetings

[@farmeraaron6946]

Where do you get it and how much

[@RC-TRUCK-ACTION]

+Jacob Olsen Check out www.fumotec.de - somewhere around 5k.

[@RC-TRUCK-ACTION]

Just look for fumotec - they have their own website. Greetings :-)

[@williejbrown8059]

how can i find a rv bulldozer

[@RC-TRUCK-ACTION]

www.fumotec.de Best wishes, BJ

[@zaneklynowsky5668]

How much does it cost?

[@RC-TRUCK-ACTION]

Zane Klynowsky Check out on www.fumotec.de :-)

[@adrianorodrigues1399]

Whats website

[@flatlineheartbeat1851]

Love these RC Models but for my own taste I probably could buy a couple of ZT Mowers for the price of one of these.

[@jea4jea413]

how much does this cost

[@RC-TRUCK-ACTION]

Checkout www.fumotec.de - they produce and sell it. Best wishes from Germany, Bjoern

[@mirisnixeigfoin]

verkaufst du auch mal so modelle

[@jakekramer5993]

Are u selling I'll buy

[@RC-TRUCK-ACTION]

Jake Kramer Look for www.fumotec.de - they produce and sell it. :-)

[@doomracing5527]

Not very impressed. All I see is fluffy dirt, and when you did get to packed dirt you never leveled anything.

[@Ягуаркаджит]

супер

[@libbystanton7756]

DKK

[@777fuzzypeach]

$4700 dollars for this

[@Rcchev]

Nice machine !!! Check out my dozer build videos !

[@alfredlordh9675]

a

[@alfredlordh9675]

ñ

[@bengaarder2972]

This guy's just no good at this.

[@RC-TRUCK-ACTION]

Ben Gaarder Yes, it's his first time try. :-)

[@cylake7013]

How expensive is it?

[@RC-TRUCK-ACTION]

Please checkout Fumotec in Germany. Thanks for watching!