rc dozer 487 003

[@rcscalebuilders8268]

What a super awesome Dozer in action. Thank you for all the inspiration to get a setup going in my yard!! I can only hope to add a machine of this calibur to my collection one day. Wonderful machine

[@rollindirt]

Thanks, good luck on your build i enjoyed the challenges as much as operating the machine.

[@trentmarconi4280]

This is the best rc dozer I've seen, seems to have decent power, Love the U blade!

[@bumpysrcexcavating8602]

that was really cool just how powerful that dozer really is the more i see it work the more i am going to have to get one Awesome video

[@RCP57]

Your dozer is awesome! It's a great mix of detail and function.

[@Seilbagger1]

wow, perfect motion. Very well done, a real good looking dozer

[@rollindirt]

Thank you, I've visited your site you take it to a whole different level, great job on the drag line!

[@bushwacker3292]

awesome To be small scale that thing is strong 👍

[@daveschwartz9712]

Seems to be very good at working this pile.

[@rollindirt]

Thank you, borrowed my neighbors dirt pile for that video, let her run the dozer after and will post it some day, kinda like a drunk dozer running around.

[@MikeDaPromoter]

That's a lovely D11R you have there.

[@MrNamtac]

lovely machine and operates very well.i would turn chains around you will get better grip and grocer pads will run cleaner. check full size machine. great video.

[@rollindirt]

This dozer is 30"long 13"high and 14"wide, the tracks are 3" wide the frame is 6.5 inches wide

[@dadsgaragefmab3379]

That thing is excellent !!! Great vid !!!

[@maycondeivisferrari7422]

nice video

[@polskiogorki7019]

I'm looking at building one also, blade width 15" wide 12.5" high and about 28 " long. Hull will be a bit wider (8") for more room for power and going with narrow pads for more ground pressure and pushing power. Aiming for the 100 pound mark. Will be a 10:1 based on a D8 rear and front end of a A575 Superdozer 15:1 but that will be more like a If I have to make heavier for more traction I'll melt some lead and put extra weight in various places.

[@polskiogorki7019]

10:1 ratio for a D8 would actually be 25.2" long.

[@rollindirt]

Polski Ogorki at 100 pounds you'll have no problem pushing, what are you using for motors to drive the tracks, I'm building a d6 cat wide track now, about 3/4 done, hope to post soon. good luck with your build.

[@rattleheadconstruction2531]

WOW! great job, Im trying to build my own so i know how much work went into that! i wish mine came out as good as that, if you dont mind me asking what did you use for drive motors?

[@rollindirt]

Gm wiper motors

[@kevinmcgann8752]

Amazing!! Do you still have it?

[@rollindirt]

Yes, ive built a new one cat d6 also .not post yet.

[@cutweldngrind]

I never finished my Caterpillar. Maybe after I finish my flat build I will continue on it. Have the motors, batteries and some electronics already. It will be close to scale but not as detailed as this. I hope it weighs over 150lbs so I can rip the ground with the tiny ripper lol.

[@shivanseebachan6233]

I JUST LOVE IT................

[@rollindirt]

+Shivan Seebachan thank you Shivan, keep up the d6n will be posted soon.

[@R54UTO]

very nice

[@nicolasberthon1788]

Je suis impressionné par les capacités de ce bulldozer ! Vraiment captivant... passionnant 👍😳👌 A bientôt pour de nouvelles vidéos 🖐️ J'aimerai bien connaître son poids et ses dimensions ? Il est tout électrique ou bien y a t'il une partie hydraulique ?🤔 D'avance merci 🖐️😉 A bientôt

[@oscarroberto7926]

Hi mr brewster...i want build one can tellme what electronics use and gear motor is great for this dozer and were buy plans for start one same You.i search and search plans and ont have look tnkz..

[@sylar1989]

how much are these big rc dozers?

[@AbdurRahim-jw9ui]

what scale is this .. & how many kg it weighs.

[@cameronbell7052]

Did you built this dozer custom

[@jinslay1]

Is this a homemade dozer or was it brought from a company pushing power is great whats the most it will pull being electric

[@rollindirt]

This dozer is hand built, with traction it pulled my Honda accord .

[@MrSigDan]

Charles Adams I makes my Tonka trucks i had as a kid seem pretty lame. Fantastic work on this. Awesome.

[@sarmat_24]

Интересно, я один подумал что он настоящий?!)))))

[@1513Cesar]

Where can I buy one of these & how much does it cost?

[@rollindirt]

Thank You

[@lowboy2975]

i have been watching theses videos for 2 years and would love too one of the theses. I think im gonna have to make my own my self lol. Im in the U.S. and can't get one no where.

[@Trucker1970]

Brian Russ if you're still looking RC4WD sells a very nice one for "cheap" which in the world of hydraulic RC $3750 is cheap. Actually... it's on sale I just bought one shipping included $3128.34 store.rc4wd.com/114-Scale-DXR2-Hydraulic-Earth-Dozer_p_4768.html it has to be a wire transfer from your bank no Credit Card or PayPal accepted though. The one you are looking at here is "priceless" with all the man hours involved. The RC4WD one is all metal beautifully detailed and 57 pounds. It's made in China by Eagle Machinery and I have not seen another like it mass produced. Most of the ones you see like this are homemade and like this guy spent countless hours building it.

[@Turbos4Lyfe]

What are the dimensions of the dozer?

[@johnhornback7878]

Get some beer an make a garden 🤣

[@chrisjohnick]

what motor are you using?

[@rollindirt]

I used two gm windshield wiper motors, rated at 212 inch pounds of torque, kids power wheels battery. Good luck with your build. I just finish a cat d6 wide track soon to post that one.

[@chrisjohnick]

cool man! how did you fit all those motors in 6.5" of body? I need 8" to fit my motors. or did you directly attach sprocket to wiper motor shaft?

[@timgrisham6646]

would love to have the specs and dimensions on this dozer. I'm in the drawing phase of building my own. would appreciate any advise you or anyone else can give. This video is where I got my idea from lol. thanks and great work

[@rollindirt]

+Tim Grisham ,i look at a lot of videos and try to scale it according to reference points, as body to track width, height of cab over hood , etc. I will be posting my cat d6n after the holidays

[@klebercardosoblasius9045]

What is his scale?

[@daanstam6697]

where to buy!!!!

[@rollindirt]

[@joaogalveias7957]

how much it costs to build that Dozer!

[@rollindirt]

a lot more than I should have spent

[@philheath9854]

Sound ?

[@drec.134]

If I cannot buy one where can I get the plans to build my own! HELP ME MAKE THIS DREAM COME TRUE GUYS!

[@rollindirt]

+Dre C. i will be showing how i did the build on d6n if can hang in there for a little while

[@drec.134]

ok i have a lot of resources to try this build

[@rollindirt]

+Dre C. also i may be willing to sell the dozer less the electronic's which im using in my d6n.

[@jetegtmeier71]

+Charles Adams a build series would be EXELENT !!!!!

[@FlyingSeaMan256]

Put a damn gas engine on it already!

[@rollindirt]

Wish i could afford the gas

[@hurricane6907]

That is awesome. Did you build that yourself? Great job.

[@rollindirt]

hurricane6907 thanks, yes hand made, building he cat d6 now,

[@hurricane6907]

I can't make a bad birdhouse. Great job.

[@StonedRedneckMarine]

Do you still make those? If so will you sell one???

[@rollindirt]

+Kelson Blount Yes i am just finishing a cat d6n , six way blade , 5 inch wide tracks, very detailed, will be shooting soon.

[@StonedRedneckMarine]

i look forward to seeing it

[@ethanzimmerman9413]

I have a cat 550

[@polskiogorki7019]

I think I'll go with 2.5" aluminum tracks, mill them on a CNC mill

[@rollindirt]

+Polski Ogorki , just saw your track system , good job! its the hardess part of the build for me,

[@shivanseebachan6233]

LOl

[@sodeussalvara6627]

Too

[@tishaw2960]

E

[@rollindirt]

+Tisha Luoma Woodke E?

[@tishawoodke9789]

My 5 year old son must have pressed it when he watched the video last year?

[@rollindirt]

Tisha Woodke np hope he enjoyed the video.