BEST PRESSURE WASHER EVER MADE for Car Detailing? Is the AVA P80 Better than Kranzle?

[@craig3802]

For me the main selling point was the 20 year warranty, it feels like an absolute tank and built to last unlike the nilfisks and karchers I’ve had in the past

[@epicautomotivedetailing]

Nilfisk definitely raised their game to be fair. I used the go p55 yesterday and that was pretty good for a small machine

[@craig3802]

@@epicautomotivedetailing fair one just don’t think I could go back now 😊

[@paulshacklady7514]

Are you still going to do a review of the other models 55 and 60. I know you cannot buy here in the UK but not sure if you can get hold of the P90 V6 see what you think of that

[@iceman9646]

@@craig3802 have you had any problems with this machine mate.

[@craig3802]

@@iceman9646 no it’s been solid for me so far

[@fastlane2914]

I never would have thought watching videos on pressure washers would bring smiles to my face! What is happening to me. I’ve seen a lot of your pressure washer videos and this one was the best because of your reactions

[@epicautomotivedetailing]

Thank you very much I liked filming this one

[@haydenharris5506]

Thanks Dave, I’ve gone and done it … just ordered a AVA Master P80 from Cleanstore. Your review was just what I needed, so thank you for a spot-on channel.

[@epicautomotivedetailing]

Thanks Hayden. I did have the master but never had time to study the differences. I was told it's same specs underneath too. I'm really chuffed with mine. Honestly when you use stubby gun you feel the power. It's immense. I think I might buy one towards September when this one goes back. Not sure if the nilfisk p200 Will be difference. But then again the Ava p90 might be coming to UK so I can't decide lol

[@officialmichaeljnr]

I just did the exact same!!!!!

[@kerrwhatley4682]

Have had mine for over a year and absolutely love it. The only issue I have had is it blows fuses ALL the time. Put in a slow-blow fuse and that’s done the trick.

[@seanmck2602]

What amp is the slow blow? Isn't it dodgy to put a bigger size fuse in a 13 amp plug, no issues since?

[@Hughjass2855]

Hi Kerr, can I please ask where you found your 13a slow blow fuses? I'm going through a few, about one per month in regular use so not too bad I guess. I think it's only the P80 models affected....

[@keithclayton654]

I watched the video Dave and bought one certainly not disappointed what a washer,mine blew a fuse changed it and everything's okay,keep the videos coming but your costing me a fortune lol 😎🤗

[@glennshannon2668]

I have just bought one unbelievable worth every penny

[@jaltaroyenuga2258]

Hi Dave, there is one outstanding issue with the AVA P80, the fuse keeps blowing out for residents in the UK, is it still worth a BUY? PLEASE ADVISE??

[@epicautomotivedetailing]

Yes mines started to blow odd fuse when attached to extension lead. There are reasons why it's happening. I'm making another video on this one

[@jaltaroyenuga2258]

@@epicautomotivedetailing I'll be expecting future content on this.

[@RoadToDetailing]

Great video Dave, as always! The best thing was to seeing your smile again on your face and the honest enjoyment you were having! 🙌

[@epicautomotivedetailing]

Thanks mate it's all about the smiles lol 😀. Keep creating mate your doing great

[@RoadToDetailing]

@@epicautomotivedetailing thank you Dave your words mean a lot to me, I’ll keep them coming. 🌟

[@epicautomotivedetailing]

@@RoadToDetailing definitely mate I only made £60 in my first year in KZbin 😬

[@staffordboy7824]

I bought the Ava Master P60, couldn't be happier, fantastic, best pressure washer I've ever had by far, i added the MTM SG35 and MTM foam canon, absolutely superb.

[@epicautomotivedetailing]

Nice one yeah they are good just make sure you dont have it rigged up to too much length of extension lead

[@jessemorrison8661]

Hey mate, did the MTM SG35 fit straight on with no hassles?

[@rehanmhatey1223]

Hi Dave Excellent video do you think this machine is more powerful than Nilfisk premium 180? What r your thoughts?

[@alistairjones4794]

A good bit of kit Dave will be interesting to see what you think as the months tick by. Great vid too as usual

[@epicautomotivedetailing]

Thanks Alistair 🙏🙏

[@Trelock30]

Excellent video. I picked up my P60 on Friday from Cleanstore - I used it for the first time on Saturday to clean the car.. I'm glad it wasn't just me that used up a whole bottle of snow foam in one covering; my old Nilfisk / Nilfisk foam canister used to do 3 or 4 coverings! Anyway, happy with my purchase and looking forward to using my new pressure washer again. Beautiful motor btw, I've got a 2019/69 M340i ✌🏻

[@epicautomotivedetailing]

Think they making a better cannon so keep eyes peeled. But then again even the mjjc with karcher fittings also fit

[@glennshannon2668]

Ordered mine from clean store on the tuesday and received it on thursday excellent service that’s from Kent to the north east.

[@mudguardrider8211]

Excellent review, mate. Im looking to upgrade my current pressure washer for the summer, which is a Karcher k3. Im a weekend warrior, but I really enjoy detailing our cars with BH and Autoglym. Would you recommend the Kranzle 1152 tst or something else? Car is due its full decontamination soon. The wife and I have a Cupra Leon 290 DSG and Cupra Ateca 310 DSG.

[@epicautomotivedetailing]

Thank you. To be honest if it's just for your own cars then domestic pressure washers are plenty good enough

[@mudguardrider8211]

@Epic Automotive Detailing Thanks for the reply. Do you have any recommendations?

[@colinmeredith7114]

It's the 20-year warranty that sold me too so I purchased the Master P70...I won't be using it but my wife will and there are many areas to clean, including the block-paving, patio windows, balcony window areas, concrete posts, and of course...the car. The Kärcher K2 (Unused) and the K5.8 Eco (used once or twice) are going to my sister F. of C. Kärcher need to upgrade their products or lose-out to better quality and reliability. I already have the top two snow-foam attachments and the lance is a tad heavy. AVA are leading the way with ideas and products, long may it continue. Ours arrived today from CleanStore and is registered for the 20-year warranty... :-)

[@epicautomotivedetailing]

100% Ava are constantly evolving and I truly believe they will crack the UK market in 2023

[@manoletvelasquez9497]

Hi Dave, just wondering if the p70 can be use for commercial purposes? Thank you! Im doing mobile carwash as well, doing like 4 or 5 cars daily. Do you think ava p70 will last for a year? Thank you!

[@daveallsopp320]

Looks a fantastic bit of kit, the hose alone not twisting and kinking is a god send to karcher owners

[@danlegge2742]

Good to see you back at your best, really enjoyed this video and interested to see the other machines in the range.

[@epicautomotivedetailing]

Thanks mate. Not at my best but slowly getting there

[@riley165]

just bought one of these for cleaning the cars, gutters and patio plus anything else I can find that needs a spray. upto 20 years warranty on these machines, all internal parts are metal and not plastic like the yellow brand and the build quality is second to none! never owned one before but used one a while back and had nothing but positive feedback from people I have spoken to. Absolutely sick of buying new yellow brand washers every few years so took the plunge and bought a P80 so fingers crossed its as good as people say.

[@epicautomotivedetailing]

To be fair I think if you get 5 years it's a good investment. For domestic use it's probably going to last longer but I'll be testing this to destruction over next 6-12 months so I can keep people in the loop 👌

[@sammolloy7632]

Brilliant! Mine just came today and like you I'm sure I'll be smiling the whole time! 😁

[@epicautomotivedetailing]

its brutal power just hope it can last a good few years which is the only thing i can't give feedback on

[@sammolloy7632]

Decent warranty on it though so Ava must be confident. We'll see!

[@SelfAwareness83]

P80 arriving today ! Why am I this excited lol

[@umranhu]

Recently bought the p80 evo to replace a nilfisk p150. Inititally had issue blowing fuses which really frustrated me but sorted with 13 amp slow blow fuse after contacting ava for advice (these are not easy to source). Ava have advised this issue is being addressed and revision being implemented on future models. The 20 year warranty was big attraction for me. They offer a higher end snow foam cannon as well. So far so good and very happy with it

[@epicautomotivedetailing]

Ava have a P90 so that may be cool to try soon. Definitely a great start in my opinion. Hope mine lasts for many years

[@MrDelcol]

What was causing it to blow fuses ? Do you power it off of an extension lead. ?

[@umranhu]

@@MrDelcol no extension used but does amplify issue. its a well known issue ava are aware of. Apparently in other countries it uses 15amp fuse. Ava actually offered me a full refund if i wanted to return it as i initially couldn't find slow blow fuse from anywhere including the usual uk shops like screwfix, bq, toolstation and specialist electrical shops. Luckily found a shop online to order from in the end after a few weeks.

[@seanmck2602]

@@umranhu can you use an extension lead now when using the slow blow fuse? Or would the extension lead need one as well?

[@umranhu]

@@seanmck2602 extension lead amplify issue so not sure how youd get round that.

[@chickenfist1554]

I've just ordered the P70 Evolution. I'm hoping it'll be an upgrade from my ancient Karcher K4

[@interceptor7905]

Kranzle is still king of all pressure washers.Ava is an excellent pressure washer as well!

[@epicautomotivedetailing]

100%

[@grzegorzgoralski6667]

Hi Dave I looking to buy new power washer I Consider between two Ava Evolution P80 or New Nilfisk 200? What do you think?

[@tombrossard435]

Great video! At 3:25 I really thought you might actually blast yourself in the face 😆. Loving the content

[@epicautomotivedetailing]

Lol not Many people noticed that bit 😂. Was hoping they would 🙏

[@sabahshakur]

Hi thank you for reviewing the Ava I'm thinking of going for the P80 but not sure if I should get the Master or Evolution. Please can you help? Many thanks in advance.

[@podman101]

Great video. Very informative. By luck I bought the AVA Evolution P80 before I'd seen your video. I have to say I'm as impressed as you! It's versatile and very powerful making short work of the car, caravan and patio! It feels well built too. The only two small niggles is the cable reel does feel flimsy and the float switches in the pump aren't that sensitive as it sometimes doesn't start back up after a short period of not been used (turning it off and on again at the switch usually sorts this problem). Would recommend above any other pressure I've used!

[@epicautomotivedetailing]

Thanks mate. Have noticed few little problems which I don't like now so gone back to my nilfisk

[@WaseemWaseem-iv4fh]

Which problems did you notice? Thinking of getting this one

[@leswhite3465]

@@epicautomotivedetailinglooking at the Nilfisk p200 & Ava p80. What’s the best in your opinion? Thanks mate.

[@epicautomotivedetailing]

@@leswhite3465 honestly the nilfisk is more robust. They have a p200. Look for a refurb at nilfisk outlet website and you will get a stunning Machine and save money 💰

[@leswhite3465]

@@epicautomotivedetailing thanks for the feedback. Yes think I’ll go for the Nilfisk p200. Looks an awesome machine👌. Topman

[@bs7157]

wow, that looks the business. i need one to clean my drive. that would be brilliant! thanks for this demo.

[@epicautomotivedetailing]

Thank you

[@marktrower2267]

Never seen you smile so much Dave great video as always mate 👍👍

[@epicautomotivedetailing]

Thanks y. I was just happy to be out filming again

[@crystalcars5210]

I’ve only just bought a new pressure washer and then these AVA P80 popped up on my feeds and now I’m wanting to buy this. I was after a Kranzle K10/122 TS but I think I would sacrifice that for this washer instead. Plus a lot cheaper. Thanks for the Epic review matey

[@eamonkelly2792]

It's good to see you back again, those new pressure washers look great it will be interesting to see how they last 👍👍

[@epicautomotivedetailing]

Thanks mate I'm back on it. Very excited to announce details about the new TV show soon too 👌📺

[@eagleeye3148]

Having just purchased the Ava p80 I can say it is definitely a superb machine with one exception, the power lead reel is really poor. The first time I used it and went to put the power cable back the cable got stuck and almost cut the wire. It’s a very flimsy wheel for such a great product.

[@epicautomotivedetailing]

Was it the master or the Evo? I know they changed the Evo power cable to make it more flexible

[@shortcircuit7149]

Hi Dave. Love the videos. I've been looking into buying the evolution 60 version. With the Ava hose how would I go about adapting for an mtm foam cannon as this is my only concern atm. Thanks in advance. Bob

[@Daz_Stap]

Another great video, but just as I was about to buy the Nilfisk. I guess I'll wait and see how the Ava works out before spending.

[@epicautomotivedetailing]

I love my nilfisk p180. But then again this is so brilliant so I can't Decide for a while until I've tested them to the very end

[@Tyro207]

How’s the Ava been after a year? Has the fuse blown? Can you attach an Uber flex hose ? Is using a mtm gun straight forward or must you need to do something special?

[@epicautomotivedetailing]

There's a new p80 Coming out. The old one was hit and miss with a small number of machines so they made some big improvements ready for release. Honestly my favourite is the Easy P57 because it's so light and has everything you need and because it's a new generation model the reliability is fantastic, zero problems. I wouldn't personally bother with mtm or any custom lance. They don't need it at all

[@redpanda906]

I really like my new Evo P80...for me, it doesn't blow fuses, leak, or have any parts that need securing with duct tape. Mind you I'm very unimpressed with how poorly the mains cable spool operates. All in though I love it. Its a cracking piece of kit and for the money and I think it's great value.

[@epicautomotivedetailing]

Yeah that was my main problem. The idea is good but not perfect. I wrap mine around the accessories holder and it's easier. I've got this for a while so will update in description below if any problems

[@redpanda906]

@Epic Car Show Detailing Thanks for your reply matey. Congratulations on a great channel and thanks for expert advice in your videos. This P80 Evo is my first pressure washer so I'm a bit spoiled eh :)

[@dixonsautodetailing9838]

I'm just starting out in the valeting business i was getting people walking past my own 2 cars a 911 and a Mercedes s class which I keep both impeccably cleaned and dressed the porsche is easy matanence due to applying ceramic coat and windows all polished and sealed i would recommend the Maguires window sealant best for my old girl so far anyway i have been watching all your videos and I have tried to get as much information and advice i can ive been detailing car's since around 14 when dad showed me the little tricks that make the biggest difference in the condition and eye grabing look so arfter 30 years I've perfected a lot of skills in applying every product available to a professional level but only ever done my own car's and family but when out of work due to the pandemic aftermath and when I was trying to find a way to get a new little business going whith only a few thousand pounds when outside cleaning my porsche 4 people asked me to make there cars look as good as mine saying that they are always looking at how i have the cleanest cars in the village so that was when i thought i enjoy cleaning cars and understanding the whole world of detailing i thought everyone could do it but definitely not im shocked at the amount of people who have no idea how to clean and dresse their cars any i believe that your definitely the best car detailing company I have seen in a long time I've been looking at trying some of the ideas for my business to get more customers your the only person I would have working on both my cars no one can ever get the car to the standard i want it i didn't have time to do it myself when running the last businesses so I tried lot's of companies but always had to spend some time getting it to how i wanted it to look i eventually just had it done at a road side hand car wash place then took it home and did the detailing myself but your cars are exactly what I have mine looking like if you ever need a sub contractor or if you want to expand your business with a franchise I'm very interested in coming to come over and have a chat and discuss further details of my business plans and how i do things to be sure you would be happy to have me working under your name with you branding i love cars there my life I believe lts a bit of a addiction for me i spend hours trying different detailing products and perfecting different application of them for maximum Performance also recently max efficiency and productivity also longevity to help profits whithout jeopardising performance of them if you can give me any further information on starting to get a few new costumers or fancy having a chat with me about a franchise i promise you that you will be happy whith the standard of my work plus how determined I will be the no1 in my area once I have some of my work see in the local area. I found your start up video very helpful especially the maintenance valeting issue i have already done the mistake offered a mini valet to get something in the bank and to show my skill level to people but i ended up getting a few jobs on unexplainable condition cars so did extra work and much harder using triple amount of product to get a normal level of quality so now I have changed my price list to reflect the amount I have to change to get extremely dirty cars up to my standard i find it puts some people off when i say that they will need to get a full more experience valet then i can do a matanence wash how can i offer them the best possible price for the money

[@isbath]

0 full stops or commas

[@ParagramCOD]

Been DYING to get the P80, personally ticks all my boxes! Apart from the blowing fuse issue, so I personally contacted AVA and they gave me a LOT of information, so long story cut short, they explained that the fuse blowing problem was caused by extension cables or the initial start up causing a overload on the motor. They have since made a modified version which helps "significantly" but they said they're still not happy with it and that they are going back to testing etc... starting now in Feb 2023 and should have fixed/revised the issue by Summer 2023 and will be for resale again in UK

[@epicautomotivedetailing]

Yeah there is a p80 V2 Coming I believe. But then again the p70 is a brilliant alternative. To the average Joe could never see the difference in power

[@ParagramCOD]

@@epicautomotivedetailing just coming back to this comment, do you personally see any real benefit for the extra power going for a P80 over the P70? love to hear from your side of things.

[@epicautomotivedetailing]

@@ParagramCOD p70 is better mate. It's more of a version 2 of the p80 if say so more robust parts. My one hasn't blown any fuses either and still yet to hear of any problems with them

[@ParagramCOD]

@@epicautomotivedetailing Great thank you, I ended up ordering a P70 last night, with the MJJC foam cannon, buzzing to get them 😂

[@Noodlehustle]

After a year, how has your experience with the ava been? I want to buy an p60/80 evo. But doubting between nilfisk premium 180. Heard ava had some problems with fuses? Which one would you recommend with your experience in all these pressure washers? Greets!

[@epicautomotivedetailing]

Hello so the p80 is very good but we had the occasional blown fuse which is uncommon for any pressure washer after constant use. Ava understood this and made a better version dialed back called the p70 which is what I'm using right now and it's a perfect balance. 100% reliability so far. Very impressed

[@Noodlehustle]

@@epicautomotivedetailing i see, thank you for the response ! Guess ill go with an P60 than. I heard fuse problems could be fixed with taking a lower power demanding version. Glad you are still using it ! Shows it is good.

[@epicautomotivedetailing]

@@Noodlehustle they are great machines. The problem is the second someone has a problem it gets magnified and it's the tiniest number out of hundreds of thousands

[@ceeK2]

@@epicautomotivedetailing you mentioned in another thread that a new p80 is coming out. would I be safe buying the p70? looks like great value

[@madmountainman5197]

Hi Dave, do you know when the revised snow foam cannon will be available to purchase with a P80?

[@davidplant-p7i]

Dave ive got 2 ava jetwashers i love them so easy to use and very powerful also very easy to use

[@epicautomotivedetailing]

Nice, I think some people who had ones that blew the occasional fuse may have been unlucky

[@davidplant-p7i]

@@epicautomotivedetailing I’ve had no issues at all with mine (touch wood) lol

[@lifeslooker]

Looks awesome. And the price point is good too. Might trade in my Kärcher for this. Need some extra power. Great demo as always. Keep up the good 👍🏿 works

[@epicautomotivedetailing]

Thanks Jason. It's very good

[@muchachogrande2019]

I really don't see how this is going to replace or compete with a Kranzle at all tbh. Sure stuff may not fall out of the storage compartments in the van but what good does that do me if it's falling over at all and happens to break? There's a nice warranty there you say? Great. That's not going to help me when I have jobs to get done that day, especially with a bunch of what seems to be proprietary accessories (all wrapped up in an overly engineered body which again means I can't service it myself and get rolling to my next job). The reason a Kranzle is so nice for mobile detailing is because it's simple and straightforward and cuts through the BS. It's an open design I can service myself and keep rolling if something breaks, it's designed in a way that I can easily attach it to the rack in the truck/van, I'm not tied into using what Kranzle tells me I have to use or anything like a built in hose reel because I can use whatever hose reel and hose I prefer and again mount it to the rack which isn't falling over in the van unless the van has fallen over as well, it has a nice beefy pump with adequate psi but more importantly lots of flow and I'm also able to tweak the parameters a bit in whichever direction I choose because I have the option of using different nozzles with a different sized orifice. This unit in the video just seems to be in a completely different arena and is more suited to someone without any existing equipment or accessories and wants one for the home mostly. And just because I know someone will say that price is a factor with the Kranzle, that's fine. Nobody ever said anything about pricing or bang for your buck. We're just talking about functionality and use for a detailer. It's also worth noting that the Kranzle is just the one at the top of the mountain, but there are still several units made by other companies for less money and the same points still apply. I believe Comet, AR Blue, and others all have at least an offering or two that's serviceable and able to keep you working on those days when shit goes bad. They won't have as much flow and/or PSI as the Kranzle but they're in the same ballpark.

[@epicautomotivedetailing]

Hello, Sorry I just want to clarify that in this video i did not claim in any sentence that this is better or will ever compete with a kranzle. I question it because curiosity will always drive human behaviour. I have a Kranzle coming to the channel soon. In fact i have quite a few so I have to balance out equipment for traders and weekend warriors. Ive got few karcher commercial machines too so my videos get uploaded around how the market is going at the time so come spring when businesses start growing with better weather ill be all over the commercial equipment :)

[@muchachogrande2019]

@@epicautomotivedetailing No worries at all, and I definitely didn't mean any disrespect with my thoughts on the matter at all, and certainly not anything negative towards the video itself. I also didn't say that you said that in the video to be fair, and I don't think you said anything inaccurate or misleading. I actually really really liked the video and presentation. I'm just more or less saying that I don't really see the competition and I'd place this unit in a different product segment all together for the reasons I mentioned. Honestly if anything I would say you may be kneecapping yourself a bit by asking the question, as opposed to asking if it's the ultimatre starter unit. All in all great video though and you've gained a new sub.

[@epicautomotivedetailing]

@@muchachogrande2019 Thanks my friend. Some titles dont bring in the views. so for 10k views it makes practically nothing so i have to find something that may refer to be edgy. My change thumbnail soon. seeing how it plays out 🙏

[@RenAdra]

Hi! I just bought the p70 one which has about 150 Bars of pressure. I own a Tesla Model 3. I don't think I can adjust the actual pressure it produces or? Would I just want to use the 20 and 40 degree nozzles? 20 for rims/wheels and 40 for everything else and then keep my distance?

[@berndbraun80]

Hi, good video, but I didn't realized if the AVA is now better as a Kränzle or not. I still struggle with me if I buy an AVA or Kränzle K 1152 TST. One additional question from my side. I would like to us the high pressure cleaner also to clean up our caravan. Is the Zoomlanz in the max extension stable enough to use with the mopp as it is just made of plastic? Thank you.

[@epicautomotivedetailing]

Kranzle are the best but then again kranzle is for commercial market whereas Ava is for domestic

[@berndbraun80]

@@epicautomotivedetailing But at least, price wise both are nearly on the same level. Especially when I compare the Evolution P90 with K1152 TST. The only I hate on the Kränzle is, that it every time needs to lay on the ground. What about the question for the Zoomlance?

[@random_purple]

Great video Dave...Price is reasonable too, especially as it has a 20 year warranty!!

[@gsbut]

Glad you are impressed so far, I think they are good machines. Never likely to be a Kranzle killer as Ava only make for domestic use, trade use is not intended. For domestic use I think the Ava are fabulously over engineered and you have to be a bit special to buy a Kranzle for home use in comparison. Ava recommend a fixed 40 degree nozzle for car cleaning which does work well, although the wide nozel on the variable does make light work of rinsing. The 90 degree accessory lance is awesome for sills and wheel arches, give it a go. But hang on when you do, you've been warned!

[@marcoontingco5370]

is there different QR attachment like the 40degrees to use for the stubby gun too? if yes, is it included in the bundle too? i'm getting more and more interested on this product

[@gsbut]

@@marcoontingco5370 the other fixed angle nozels are accessories

[@marcoontingco5370]

@@epicautomotivedetailing looking forward to it. hopefully this product reach Ireland too. but i'm willing to pay shipping and taxes for a great product anyway.

[@petef7323]

Very impressed. Do you know what the difference is between the Master and Evolution P80 models?

[@colmetcalf8583]

V4 Evolution P80 with a V4 Master P80, then the inside of the machines are identical. The Evolution is a body-style developed.. The Evolution has added: a reel for the electrical cord

[@robtallentire1051]

One of your best videos mate in my opinion! Was thinking nilfisk but not sure 🤷‍♂️😬

[@Hughjass2855]

Great video Dave, can tell that this machine is enjoyable to use, somehow I knew you'd like it. I've been using mine for a year now and have no regrets, still finding little advantages in the design and I'll never again buy a yellow machine! Looking forward to the new foam Lance for the reasons you described but I'm happy using an aftermarket one of my choice. Very useful to have this common fitting. Biggest simple advantage for me is the very long high quality hose, never have to move the machine around while cleaning a car.. Looking forward to your future content on these. Thanks Dave.

[@epicautomotivedetailing]

Thanks Jason appreciate the comment. Yeah I love using this one. Gutted I don't own it but then again I like my nilfisk P180. I'm testing so many out these days it's so hard to stick with one long term. I got the go p55 in next video Vs nilfisk and those yellow karchers

[@nps5886]

the last video i watched of his was when he cleaned his own car he was using a nilfisk washer

[@epicautomotivedetailing]

@@nps5886 I got many machines and video's not all filmed in order so I try to have something different every time if possible

[@SelfAwareness83]

Am I right in saying this has same fittings as karcher k series?

[@epicautomotivedetailing]

@@SelfAwareness83 yes mate

[@aztex6981]

Pro tip get the 20m extended cable then you wont have to move the washer around. Keep it stationary its awesome!

[@epicautomotivedetailing]

100% i got 15m now and its great

[@Beardedpete87]

Awesome vid dave, the Ava range definitely looks like a winner to me

[@epicautomotivedetailing]

thanks mate Definitely for the price all the stuff that come with it makes sense

[@markmummery8765]

Had 2 GoP55's.First one hose inlet failed,second one now back for repair due to motor screeech..When it works its good !!

[@TENNESSEETRACKHAWK]

Great freaking review bro totally sold me!

[@epicautomotivedetailing]

They have a V2 p80 coming soon so don't get one yet

[@TENNESSEETRACKHAWK]

@@epicautomotivedetailing awesome thanx ok ill wait

[@tuningemporium]

Look forward to hearing about your experience with it in the future mate 👍👍

[@epicautomotivedetailing]

Thanks mate I love it. Used it today was so impressed. I can't really fault it at moment

[@robtallentire1051]

Would you say the nilfisk or the one you just reviewed has the better hose and would the 130 bar version be any good in your view?

[@epicautomotivedetailing]

Your in luck I'm Filming with loads of machines today including the smaller Ava pressure washers

[@craigstead423]

I have the p60 been using it since the UK release and I'm more than happy with it, the foam Lance bottle could do with being bigger it uses up the fluid fast but there's a new Lance due out soon think I'll purchase that one too.

[@epicautomotivedetailing]

Im Getting that cannon very soon for testing 👌

[@hgv1883]

I had my p80 for a year now i purchased the 12 mt ext hose and the syphon hose it doesn't like extension leads kept blowing fuses ref the 😅ext hose great for everything i need to do

[@epicautomotivedetailing]

No it definitely doesn't like those leads. The new 2024 P80 is set to fix that issue

[@stevia13]

Hi - been watching your pressure washer vids. Got it down to the AVA Evo P80 v Nilfisk P180. Would you steer me in one direction over the other? Many thanks, Steve

[@epicautomotivedetailing]

ok so both machines are brilliant. I own both so for me I just alternate now and then. I would say you can save extra money with the AVA p70 and get a longer hose for it.

[@dalydetailz2120]

A great review Dave. Looking forward to hearing how it held up as a tool thats in daily use.

[@epicautomotivedetailing]

Thanks mate. I will update the description in few months and will do a quick 5 min video this time next year to see how it held up

[@carlostheimer6505]

I've had my Ava p80 for 12 months two things ive changed the snow foam gun for a better make problem solved now it uses around 450ml to cover a car. And second with some massive help from nick at yumcars convert the gun to a mtm sgs28 gun for car detailing this set up is EPIC

[@carlostheimer6505]

@@epicautomotivedetailing word of warning the brass end of the hose were the gun fits is NOT a karcher fitting cut 6 inches off the hose and fit a 22mm female adapter then fit yumcars mtm 3/8 quick connect coupler.the 6inch piece of hose left over with the brass end fit a 3/8 Male adapter.this will still allow you to use all the original components it transforms the washer massively

[@epicautomotivedetailing]

@@carlostheimer6505 amazing stuff. Only yum would fix that problem 👌

[@MrDelcol]

@@carlostheimer6505 Is the brass hose connector you refer to the same as nilfisk.. the bigboi wash r is the same. They are round where the karcher one has the 2 flat bits on either side.. If its the same then a nilfisk adapter for the mtm stubby would work..

[@carlostheimer6505]

@@MrDelcol i bought the nilfisk fitting myself but it would not fit.the nilfisk fitting i have is white inside which only fit karcher as do the yellow once which also fit karcher because as you refer too with flat sides. I belive you need one with the green inside to fit but good luck trying to find one i could not anywere.

[@RichardDowd]

Listening to this - I was expecting them to be WAY more expensive than they actually are!

[@epicautomotivedetailing]

Ava very good value for money

[@Fannyshnifter]

Hi mate I've been watching your videos loads recently and wanting to start my own valeting business and going away from painting cars I was just after some advice on pressure washers as I want something that's going to last but I don't have a huge budget I was thinking under £300. What would you recommend? I live in the UK so a bit worried about fuses blowing

[@epicautomotivedetailing]

Go for the p70. is bar less but that seems to be the perfect number. It works brilliantly. Im featuring a P70 this month

[@RichardDowd]

Just bought the p80 Evolution having seen your video :)

[@examplerkey]

The only negative about this video is sir, please stop looking into the nozzles while the machine is on even you don't pull the trigger. Your mind can trick you one in a million chance. Once, I was using a grinder. I was wearing heavy duty gloves and goggles. After I used it, I stopped it and placed it on the workbench, then somehow suddenly without needing to, I reached out involuntarily to the still spinning, winding down, disc and got my finger cut through the glove. Since then, I have been paying extra respect to power tools.

[@PhantomX786]

Thank you for your awareness sir

[@richardburton7980]

So it’s been 8 months what’s your views in the Ava p80 now is it better then kranzle

[@brunost-amour4561]

Psi? Gpm? Can you change the hose to a standard one? Thanks

[@antonywalker8837]

Blimey David, Every time you show us another (jet wash) video. I think that's good. Then You go and show me something better. I can't keep up. Dad x 😂🤣

[@epicautomotivedetailing]

Sorry dad. Pressure washer videos coming to an end soon for a while. They help keep the channel ticking over

[@mobilewashdetailing361]

Great review on the AvA Evolution P80!

[@epicautomotivedetailing]

Thanks mate

[@schissgring]

So what do you recommend now? The P80 or should i get the Nilfisk Premium 180? I want a new pressure washer for my house in first place and for my car in second place. First i had the warranty as a selling point but then i saw that Nilfisk has the same when i buy it in Germany in specific shops so the easy decision became hard again.

[@faesser92]

Hi I have trouble choosing between Nilfisk premium 190-12 and AVA p80. I think you given good reviews on both. what would you choose if you did not have to worry about accessories

[@faesser92]

You got P180 but Premium 190-12 is nerly the same i think

[@AlexRider]

Hey great video! I'm in debate about buying either the nilfisk p180/200 or the ava evo p80 but I'm worried about this whole fuse blowing situation in the UK. I've heard if you hold the trigger in before starting it, this usually does the trick. Don't suppose you would be able to confirm whether they have fixed the fuse issue and whether this trick does prevent the fuse from going? Lastly, if it wasn't for the AVA blowing fuses, would you recommend it over the nilfisk p180or p200? Thanks!

[@epicautomotivedetailing]

Well Today I received the first of its kind AVA p80 so i will hold off from giving an answer to the fuses as its being tested for the next few months as the fuse blowing could be a thing of the past

[@AlexRider]

@@epicautomotivedetailing thanks for the quick reply! That's good news. If the fuse issue is sorted, would you recommend it over the nilfisk p180/200? The fuse is the only thing really holding me back on this machine

[@ModifiedMadness]

I’ve read fitting a slow blow fuse can help, which I didn’t know was a thing! I’ve just taken delivery of a P60 Evolution and that says on the box about having a slow blow fuse

[@PLUGSROADWARSIE]

Hi is the P80 worth the extra cost?

[@epicautomotivedetailing]

Yep totally

[@PLUGSROADWARSIE]

@@epicautomotivedetailing Thanks. Epic response time 😎. Loving the channel.

[@James-sf5bb]

So…….. i went all out with a recent purchase! I own a K7 premium which is a beast of a pressure washer. But I had a stack of money burning a hole in my pocket 😅. So rather than spend it wisely and buy an AVA…. I bought the yum detailing kranzle 1152 package with all mosmatic connections mtm foam cannon and sgs 28 gun, and, I’m bloody glad i did. But the mrs keeps asking me, why the feck do we need 2 pressure washers in the shed! She clearly doesn’t understand 😂

[@epicautomotivedetailing]

Fair play you get what makes you happy 👏

[@michaellarsen4323]

so which would you choose the ava p80 or nilfisk p180?

[@epicautomotivedetailing]

Both are brilliant. Personally I would go for the cheaper Ava p70

[@mann8254]

Thanks Dave, another great review, that pressure washer looks amazing and it seems like true value for money 👌

[@epicautomotivedetailing]

Thanks mate. I enjoyed filming this one

[@WHY.A.H.WHY.A]

Hi Dave, I have a few foam canons from MTM with Karcher K adapter, will these work with the Ava, as i can seen from press pictures, they look similar?

[@epicautomotivedetailing]

Yes 100% fit perfectly 👌

[@nssimpson]

I'm thinking of getting the P80 to clean my driving instructor vehicle. How do you deal with cleaning cars with decals?

[@breach8813]

this is why women get annoyed with men, men are simply happy over the most simplistic stuff. love it

[@epicautomotivedetailing]

Lol 😂

[@wsandoe]

Great video! I bought the P90 V6 from Ava.. man oh man it packs a punch. To bad its to powerful for all the accessories. Would love to have a pattio cleaner.

[@epicautomotivedetailing]

Bet thats mega. Sadly its not coming to UK

[@ceramixdetailing29]

@EpicCarShow Great video. Regarding the snow foam cannon, I use saved Demon Shine bottles with my snow foam cannon. I pre load the bottles with snow foam solution, Aquaseal polymer sealant solution etc. and just change the bottle when needed. The thread on the Demon Shine bottles is the same as most snow foam cannons. I'm just wondering if they will fit this one?

[@epicautomotivedetailing]

Yeah I do that with coloured snow foam now to make rainbow foam for the odd the video 🌈

[@craig3708]

What a awesome video and what an awesome jet washer . 👍🏼💪😎

[@epicautomotivedetailing]

Thanks mate. Had fun making this one. Filming 3 videos today

[@Geefiasco]

Hi mate, it this suitable to carry by hand? I noticed there's a bar running down the middle and wondered if it was a carry handle.

[@epicautomotivedetailing]

It's very heavy. It has wheels so no need to carry around.

[@heroicmiquio6327]

Grüße aus Niederbayern. Ich brauche einen AVA Hochdruckreiniger um die Fassade und das Dachstuhl außen sauber zu machen, ich kann mich aber nicht wirklich entscheiden welche ich mir zulegen sollte AVA Hochdruckreiniger Master P80 oder AVA Hochdruckreiniger Master P70 XL entscheiden, ich denke mir das der AVA Hochdruckreiniger Master P70 XL vollkommen ausreichen wäre oder was meinst du dazu? Schöne Grüße, Monika G.

[@sb8536]

Quick mate i just sold my k7 and I'm ordering a new one tomorrow 😄 ava p80 or nilfisk 180?

[@epicautomotivedetailing]

I got both and even I can't decide lol. If you already got stubby gun etc that you like then nilfisk but if you want a little extra then Ava.

[@sb8536]

Yeah can't decide aswell 😄 i don't have a stubby gun but don't mind getting/ paying for one. I just want the most practical and powerful one, I absolutely hated the k7 twisty hose, roll off system and the connector not a fan of aswell (I'm a real inpatient guy 😄) Is there a noticeable difference in power 180bar vs 160? Anyway thanks for quick reply mate that's awesome 😄

[@andrewwallace1030]

Loved this video and this beast looks insane! Do you know if there are adapters for my stubby gun (MTM SG35)

[@epicautomotivedetailing]

Thanks mate. I'm looking into it

[@Abdullah_Alfayez]

Is the difference between the p80 and the p90 worth an upgrade?

[@epicautomotivedetailing]

No not really

[@harryblinkhorn2792]

Being new, what alloy wheel cleaner would you recommend, would i need to brush it in and power wash it off

[@epicautomotivedetailing]

If for business then Autoglym professional is a good all rounder. No such thing as a perfect wheel cleaner but it's definitely a good one

[@harryblinkhorn2792]

Which one as when you Google it at least 3 pop up

[@epicautomotivedetailing]

@@harryblinkhorn2792 I use blue one heavy duty cleaner. But ideally you need all types of wheel cleaners / fallout removers

[@HypnotizinDetailz]

Brilliant stuff Dave, really impressive... I thought I don’t need a pressure washer right now, but you just convinced me that I do... 😁😉🤩

[@epicautomotivedetailing]

Thank you sorry for very late reply

[@rossjordan6136]

Great videos, Can you use the SGS28 Spray gun with this hose on an AVA P60 or do you need to get the Karcher quick connect adapter?

[@epicautomotivedetailing]

wayside car valeting made a video on this topic as he got it to work. try his channel as he has it all set up. think he struggled to find the right part

[@thetacticalape8852]

Wow. I wish they sold them in the USA, I would buy one immediately!

[@karl3927]

Thank you for the video Dave. Certainly looks a very powerful washer and I like the accessories and features. Key question is how reliable will it be. Let's hope it will be 🤞. You did a cracking job the the BMW. It looked stunning after your sterling efforts. 👍

[@epicautomotivedetailing]

Thanks Karl. Yeah that's the only thing I can't comment on until time has passed but I'm making another one next year as I'll be borrowing this machine and basically testing it till destruction

[@lifeslooker]

The fact that anything mass produced will fail, means it’s a wait n c. As long as it’s sturdy, it will last. Kärcher shave been known to fail. Miserably. Happens with all things

[@Rivaboyz1987]

@@epicautomotivedetailing is it still working mate

[@hussnainiftikhar2648]

Hi Dave, is the p60 better, or the p80?I thought I ordered the p80 large bundle but the p60 came instead lol.. don't know weather to send it back and get the p80?

[@epicautomotivedetailing]

P80 is superior mate. I'm testing the p60 and it doesn't come close I feel

[@hussnainiftikhar2648]

Thanks mate!!!sent the p60 back, will be getting the p80!!

[@hussnainiftikhar2648]

Also would you recommend the MJJC foam cannon Pro to go with p80?

[@Finkjam]

Its reduced on their UK site to £344, do I buy now or wait for the upgraded snow foam cannon version?

[@epicautomotivedetailing]

Go for this one then use a large coca cola bottle instead for a foam cannon 👌

[@Finkjam]

@@epicautomotivedetailing ordered, thank you!

[@ExclusiveTint-CarDetailing]

They should make one just for car detailing with no other house bits on there only detailing bits would look great.

[@epicautomotivedetailing]

Don't worry I'm in contact with many companies. I'm working on it 😉

[@harryblinkhorn2792]

I have a k4 pressure washer, what Lance/wand, would you use, I've seen you use one with a very wide spray

[@epicautomotivedetailing]

i use sgs28 from yum cars they have a youtube channel aand recently did a video about karcher k4 upgrades

[@chadthiem8371]

My cartri just took a poop on me thanks for this video definitely gonna purchase this product.🤘🏼🤘🏼

[@sebna]

How does it compare to K7 in your view? Which would you pick for general use around the house rather than mostly for cars?

[@epicautomotivedetailing]

This pressure wash is unbelievably powerful. I have a k7 but this gets used more often

[@sebna]

@@epicautomotivedetailing in your review of K7 you mentioned that its lack of pressure in compare to you pro Karcher model is very noticeable. How does P80 feel in compare to your pro Karcher? Also I believe I read that you have also experience using Kranzle. How P80 compares power wise / cleaning wise? Thanks

[@epicautomotivedetailing]

@@sebna the Ava is more powerful over the karcher 7125. But the 6/13 is better if you have quick release attachments

[@sebna]

@@epicautomotivedetailing nice. It looks like AVA P80 is one hell of a deal. Lets hope it is really meant to last.

[@sebna]

@@epicautomotivedetailing for the past 11 years I was sporting C 120.3 but is started acting up few years ago. I probably would be able to get it fixed but I thought I will treat myself. I checked today and I bought C 120.3 for 120 GBP. It came with plethora of addons like premium patio cleaner but what surprised me the most is that it is rated at 120 bar max but also 480l/h. The flow is not too far from 600l of AVA P80... Gear wise, similar package will cost me 600e for AVA... I hope that upgrade will be worth it. Do you know about any worth recommending Karcher (AVA) to Nilfisk accessories adapter? I could save 80 euro by re-using my Nilfisk premium patio cleaner and make our planet happier by not generating more plastic waste than I already am.

[@mz8210]

Would it be possible to connect that AVA's stubby gun to (any) other high pressure washer (Karcher / Kranzle / BigBoi) ?

[@epicautomotivedetailing]

They share the same connection as karcher