BEST QUICK RELEASE in 2023 for your Tripod, Monopod, & Gimbal - Review of PGYTECH SNAPLOCK SYSTEM

[@JohnLe]

an honest review of the best quick release system i've used yet.

[@ciba20]

yes, i prove it

[@takaliuang]

Still recommend it on 2023 bro? I am considering between this and F38

[@JohnLe]

@@takaliuang absolutely, used it last night.

[@JaySea_Productions]

@@JohnLe Have you had a chance to check out Ulanzi Claw system? Been out for ages and very much the same as this but cheaper and doesnt need any tools to tighten.

[@CRISSBLAZINY]

how can i use this on ronin rs3?

[@JohnLe]

screw the base of the system on the plate of the RS3

[@CRISSBLAZINY]

@@JohnLe and after?

[@pereklund7112]

Thanks to this video I got one and really like it. So much so that I got them for all my cameras, tripods, monopod and the gimbal. I've used them for about 6 months now and they have been working flawlessly. It's such a relief not having to think about the different mounts and changing plates, just grab what I need and it clicks together.

[@JohnLe]

Hi Per, I am glad this video helps!!!! I am glad you're enjoying the system. It certainly is a very important part off my workflow. I hope to make more videos like this soon :)

[@mcmillanvideos]

With the F38 did you have a good bit of 'play' or 'wiggle' when your camera was mounted to your tripod. Is the Pgytech different/better? I'm thinking of going to a quick release arca plate system if I can't get something quick, easy and small to hold everything together tightly, as if the camera and tripod are all 1 piece when fully secured.

[@artofdao]

so ulanzi f38 or pgytech ? i like the last more but they seem very similar. i havent used one of them so what is the recommendation to buy . THANK YOU SO MUCH

[@JohnLe]

I recommend the PGYTECH one. I"ve been using it for over 2 years and it's working great Link to the Quicksnap: amzn.to/3CO7gc5

[@mrwayne8018]

Are these compatible with the F38 Falcam plate?

[@amalmohan6982]

Hey John this is a great video! I'm planning to buy the PGYTech clamp and use it with my Manfrotto tripod by replacing its proprietary plate. Can I just unscrew the Manfrotto plate and screw this one in? Or do I need to buy an adapter or something to make this work? Thanks in advance!

[@JohnLe]

I am not sure of the manfrotto tripod. but you can either remove its plate and screw this one in, or just screw the PGY baseplate on top of the other one and use it that way. what i do with my tripod is get rid of the OEM one, clamp the baseplate of the PGYTECH into it, and then use the quick release that way.

[@raymondcphoto9756]

Can you also do a review and comparison with the NEEWER GM34 Camera Quick Release Plate Kit? Thanks.

[@wakuyanow]

The nonchalance and timing of "And some instructions that I never read" really tickled my funny bone. I'm glad the line was not thrown away.

[@rwi8406]

Thanks for the videos on the Falcam & PGYTECH systems, very helpful. Have you tried replacing any of the tripod mounting screws with D-ring type screws? I've switched all of my L brackets and quick release plates to 3-way screws that can be tightened with the D-ring, a flat-headed screw driver or a hex wrench, very convenient.

[@JohnLe]

Hi, thank you for the comment! i haven't replaced the screws because i think the technology of the patent is in the spring loaded screw.

[@blurkmasterjay3343]

Hi, thanks for the video, seems like a great system! I was wondering however if you can attach the Peak Design anchors/loops to the plate and if it still fits in the snaplock base then? It looks like there is not much room for any strap even though it has holes to accomodate them. Have you tried this perhaps?

[@JohnLe]

I have never tried this, but I am not sure id' recommend it. it seems like it's gonna be more trouble than it's worth. what I could do is mount the base (from Peak Design) to the base of the PGYTECH then just use the quick release / snap feature.

[@erichstocker8358]

The PD plate does NOT fit on these. These do NOT fit on the PD capture.

[@Samimaka]

Is there any play in connection. Now using ulanzi claw with sigma 60-600 and camera and there are little movement.

[@HumbertoAbed]

Been using some Neewer fast release plates for year now without any issue at all. They are cheap and reliable. But after I saw your video I got one of this based in two factors. Size (height is almost identical in both, but foot print is was smaller), the arca swiss base, ohh, and a third factor, they look way better than the neewer ones. I've walked so many miles now with my monopod on my shoulder and my camera on top via the neewer plate with confidence. I hope I feel the same way doing so with this. Got the 2 bases, 1 top setup. I'll let you know how it went.

[@Indo_chef]

I just bought a set based on your review. Mine doesn’t give that satisfying click. Defective unit?

[@wildscapesph]

Was going for the other one. Thanks bro! Getting this one instead.

[@JohnLe]

You're welcome! I've loved it so far, and it's been very reliable!!! thanks for watching

[@asaperez-bercoff1873]

Really great video. I have also watched your video about the issues you have had with the Ulanzi Falcam F38. I was interested in that because I already own two Peak Design (PD) Capture clips...Pity that this quick release clamp doesn't accept the PD base plate, and that this PGYTECH base plate doesn't work with the PD clip. :(

[@TheFaithFilledJourney]

What cover do you use for your camera?

[@JohnLe]

I use this one amzn.to/46IY7Ow

[@JohnLe]

be sure you get the right kind as they also have one for an R6II amzn.to/40foOrt

[@rickyskinner6529]

Loved the video, thanks. Very informative. Do the PGYTech plates fit into the Falcam system?

[@JohnLe]

no it will not

[@rickyskinner6529]

Thanks John. Keep up the great work.

[@AnaaNis1233]

But Falcam does 2 sided plates that fit onto the PYGtech

[@AyeeeTV1]

Does this plate work with the Ulanzi F38 tripod?

[@JohnLe]

I think it can be adapted but natively, no.

[@syrompicturez2917]

Appreciate y0our openness

[@JohnLe]

thank you for watching

[@LCExplore]

have to say I find the different quick release systems really annoying... love the Peak Design capture clip, but they don't have a quick release that can be added to a tripod etc, PGYTech has a great quick release but the beetle buckle is awful and definitely cant trust the clamp mechanism on it... now to try the F38 quick release with the 2 in 1 plate that works with the peak design capture clip...

[@JohnLe]

I think most of it has to do with design and proprietary. in my opinion, the PGYTech quick release is the best in the market right now. I don't have the beetle buckle, but considering getting it. I am glad you said something. I have heard many great things about the PD capture clip, but you're right, PGYTech and PD don't really play nice i don't htink.

[@LCExplore]

@@JohnLe If PGYTech made a different version of the Beetle with screws (and preferably the release on the other side) I would swap immediately, but I have almost lost 2 cameras because of the clamp so for now its a no-go. Having used both systems - being able to access my camera quickly is more important to me than the time saved by not having to tighten the screw on a tripod. :/

[@simoz78]

Whats so bad about the beetle buckle? Couldnt find any review talking bad about it not being secure enough Did the clamp mechanism suddenly come off or something?

[@simoz78]

@@LCExplore Whats so bad about the beetle buckle? Couldnt find any review talking bad about it not being secure enough Did the clamp mechanism suddenly come off or something?

[@LCExplore]

@@simoz78 that's exactly what happened on a number of occasions. I have the PGYtech quick release and the peak design capture clip and have managed to find a plate (by ulanzi) that works with both... the amalgamation of three systems that really works - crazy that one company can't manage to hit the nail on the head with a whole system that really works.

[@rakibuz-zaman]

Love it! Do you know if we can use other arca Swiss plates on the pqytech snap lock plate adapter?

[@JohnLe]

I think you can use the PGYTECH baseplate and adapter on other arca swiss products, but i wouldn't go the other way since i don't know how well the locks will snap in.

[@DronSky]

Hello @JohnLe 🙂 Wouldn't be afraid to use this system on the zhiyun crane 2s gimbal in vortex mode with a 3-4kg camera ? or what system do you recommend for maximum camera security ?

[@JohnLe]

I feel pretty confident using this but you have to be sure it's locked . otherwise the spring will release.

[@DronSky]

Thank you for your answer 🙂👍 GL 🍀

[@stephaniesoltau2485]

Hi! thanks for your great review! Which tripod do you use with this snaplock system?

[@JohnLe]

hi, you can use any tripod. the base is mount via a 3/8 or 1/2-20 screw.

[@stephaniesoltau2485]

@@JohnLe do you have any travel tripod recommendations that are good for both photo and video? I have a mirrorless camera. Thanks!

[@JohnLe]

@@stephaniesoltau2485 for personal vlogging, i use the PGYTECH Mantispod (amzn.to/3rLTDns). It's small and easy to travel with. I love it! for professional work, i use this fluid head tripod (amzn.to/3T91QgX) i take it to the beach and stuff, but it's not necessarily a "travel" tripod. I love it for stabilized shots though.

[@yeeming8]

hey, great review! gave me the insight to get the same wondering, is Pgytech release compatible with F38 system? and they cross system compatible?

[@JohnLe]

Hi, thank you! no they are not compatitble, unfortunately.

[@BERAT4EVER]

Thank you for your videos . Can l use this mounted on my 70-200 Nikon lens ?

[@JohnLe]

Yes. I use it on a 70-200 RF. I also use it to hold a gimbal. It’s perfectly fine. If you do buy it, it’d help if you use the affiliate link 😀😀

[@BERAT4EVER]

@@JohnLe I don’t think l can buy from that link from Denmark. I have to change at Amazon Germany 😊

[@JohnLe]

@@BERAT4EVER haha thank you for trying!

[@BERAT4EVER]

@@JohnLe you are welcome 🤗

[@BERAT4EVER]

@@JohnLe do you have a European Amazon link 😀?

[@axcis]

John I have some question to ask: 1. The latest version of F38 quick release plate had include an Anti-Deflection function, not sure will it solve the twist issue, can you try that out? 2. Does the plate from PGYTech able to use on the F38 system?

[@JohnLe]

I think the F38 is only available if you buy the system for DJI gimbal. buying a standalone system is not available. I'd love to test them @ulanzi. I will check and see if the plate will fit the F38. I am doubtful.

[@axcis]

@@JohnLe have u check the plate for PGYTech and F38?

[@JohnLe]

@@axcis I tried the PGYTECH plate and it does not work with F38 system.

[@skfoto]

Excellent and super useful video. Been using that snaplock system since it came out. Rock solid. Fitted my iFootage tripods with that, and the Pgytech plate fits the PeakDesign tripod nicely too (the PD plate however does not fit the Snaplock clamp). Was thinking of switching it all to the F38 system just because of their excellent Sony A74 cage, but after your previous video, i decided to pass and stick to the Pgytech snaplock system. And I since purchased their new Mantispod v2, which also has that same snaplock system.

[@kloydreaport967]

Does the snaplock plate adopter can do the same setup as the falcom f38 plus peak design slide lite? Whereas you can connect the peak design hooks to the adapter. Its like a sling carry with a quick release. If so, where do I connect the hooks? Thank in advance.

[@JohnLe]

are you asking about putting those pucks on the plate itself on the bottom?

[@jacobsmith2193]

What is that rubber cover flopping around on the bottom of your camera? Is that why you can't get most quick release plates to stay aligned on the bottom of your camera?

[@nh.create]

Really appreciate the honest review! I was considering the Ulanzi claw, which kinda have a similar mechanism? However the anti loose feature on the PGYTECH is the deal breaker for me! Thanks for this video, it was worth the wait!

[@JohnLe]

hi, thank you for the awesome feedback. I am sorry for the long wait. It's been hectic, but it was more time i got to test the system. I love the anti-loosen feature of the PGYTECH system. hands down the best yet.

[@whatthefitt]

Is there a backpack system for this?

[@JohnLe]

yes. they have a clip for the backpack.... I think it's pretty good but I do not use one - amzn.to/3kdNgZF

[@whatthefitt]

@@JohnLe thanks!

[@GrantAmbrose]

Hi John, loved this video. I just ordered this based on your video - thank you. More vlogging tech vids would help me :)

[@JohnLe]

Hey Grant! Thank you for trusting my review. I’ve used this adapter just about everyday! Thank you for watching!!!! New video coming soon about my fav vlogging tripod

[@darylRvillaescusa]

Are you going to try the ulanze claw

[@vakharia]

Does anyone know how exactly do we attach the PGYTech quick release plate to a DJI RS3 mini?

[@jasonzuniga2587]

Awesome review and honest feedback. I wish you had an affiliate link so you could cash in on my purchase. Was waiting for this review and will definitely be investing in the system. Can't believe there aren't more comparison videos between these two systems. Thanks again!

[@JohnLe]

hah thank you! i tried to set up an affiliate link once through amazon, but that didn't really yield much. but since you mentioned this, i am setting up an affiliate link with PGYTECH and see if they'll approve it. It might be a day or so before they approve it. I appreciate your support. Please pass this video along to any of your friend who you think might benefit from it :) I'd love to review other products so any feedback about the video is appreciated!

[@jasonzuniga2587]

@@JohnLe if you get one by the end of next week, let me know and I'll use it.

[@lifeofdang92]

Which one you like? F22 vs this?

[@JohnLe]

Never used f22 but I prefer this brand

[@JoelFreck]

Hey John, new to the channel and your setup is one of the cleanest I've saw online. Would love to see how you set up your lighting and scene to shoot Vlog style, cuz this looks Amazing.

[@JohnLe]

Hey Joel, thank you for the comment. I'll add it to the list to make :) it'll be coming to the channel soon...

[@CurtisAhoPhotography]

Way better than the Falcam. Thank you for the recommendation!

[@JohnLe]

I’m glad you agree!!! I love mine

[@etenten]

Hi John, I use the Ulanzi claw system and the biggest issue is how loosen the plate is. It can't stabilise my R6 vertically on the tripod. Do you recommend switching to the PGYTECH system?

[@JohnLe]

Hi! I don't know how the PGYTECH plate will handle mounting in vertical mode. it's not made to support that kind of torque, though the plate will not come lose. If you need to go vertical, i'd recommend getting a cage and mounting it to the cage. then get the PGYTECH system to make it quick release. i can honestly say that I've been using this for weddings on weddings, and it hasn't come loose yet. If you decide to give it a try, i have a link in my description.

[@stevenml5748]

Thank you

[@JoshuaC923]

Thanks for the review John! Need to check out this system. It does look similar to the ulanzi claw but I'm not sure whether that has the locking feature. Great review👍🏻👍🏻👍🏻

[@JohnLe]

Thank you Joshua!!!

[@MrKodak1996]

Was snaplock fit with Peakdesign plate?

[@JohnLe]

i think it'll fit. i do not have a pd so i can't confirm

[@marvindicate]

It will Fit But it wont lock, I Have Both PD Capture Clip V3 and The Beetle Clip, I changed to PGYTECH from peak Design because of the snap lock system, its so easy to Switch Your camera from Monopod,Tripod, Gimbal and to the Beetle clip.

[@JohnLe]

@@marvindicate that's good to know. thank you!

[@mingueyox]

Great video. These quick release systems can be really confusing and at these price tags you don't why to buy everything single product to test them, especially when you are not a pro. Your video is really helpful. Can you tell us however the main difference between the falcom F38 and F22, is it just the "size" factor.? Cheers 👍

[@JohnLe]

thank you for your kind feedback. yes they are pricey to say the least. I never used the F22, but it looks like it's a smaller configuration and they have a whole eco system around it (cage, etc...) Up til today, this PGYTECH is still my fav set up.

[@mingueyox]

@@JohnLe thanks for the quick feedback 🙏

[@JohnLe]

@@mingueyox youre welcome! if you do decide to purchase a set or a number of sets, please use the link in the video haha

[@wzk921109]

do you wanna compare the seastar Q1s from ifootage gear. I got it on mine, the snap is satisfying every time

[@BangZoomReviews-wu7bm]

This is like the Ulanzi Claw Quick Release. I wonder which is better between the two.

[@mase202]

Awesome videos! Have you tried the Ulanzi Claw quick release? It would be great if you can take a look at it and see if it can compete with your current system. Yes please review the hand held tripod stick! Thanks

[@JohnLe]

I haven't tried the claw system; however, the most valuable part of the PGYTECH system is the "anti-loosening" feature. It what makes the system worth every dime. The adapter plate will not loosen from the camera.

[@realMysta]

I actually bought this set a while back trying to find a plate for my mini tripod/bluetooth stand for my sony. my biggest issue is you can't have the peak design loop snaps on the thing and put it in. I really wish something would be done about this universally, way too many awkward fits or lack of fits because of the peak design loops that i use for nearly everything strap related.

[@stkuj]

Have you tried the F22 system?

[@MrMilanina]

NIce video, but seems like something risky to use compared to Falcam.

[@IanSAbraham]

I guess the base plate works on a Falcam Quick Release.

[@markifi]

i don't see the appeal over the now 20 years old manfrotto 232 plates. needs an allen wrench to secure? it's 200 grams lighter. big whoop.

[@markifi]

the manfrotto is so large it never comes loose, the needle bearings solve a problem the size of the plate introduced in the first place

[@markifi]

and there's a lever you can secure with with your thumb or index finger in one second. also, it's cheaper than this somehow

[@imagelush5146]

Thanx

[@JohnLe]

No problem

[@xdrew707x]

Forget my comment on the ulanzi video 😅 lol

[@Daniel-Condurachi]

to bad that the PGYTECH Bettle Camera Clip has a plastic back and the hinge is a thin metal pin in the plastic back. Otherwise the PGYTECH system would have been great.

[@timothyawe5103]

This is a awfully