Quick Release Plate For Gimbal | A Must Have Gimbal Accessory | Ulanzi Falcam Quick Release.

[@Sola_Scriptura_1.618]

I own it and love it! Worth every penny. I use nail polish as a thread locker, and it holds tight!

[@ignitedvisuals]

Thank you soo MUCH! I Ordered them yesterday and got 4 today .. love them already :D Best option I've seen so far. Plan to use them on: my monopod, tripod, ronin and on my cage ( to easily take off my rails) .. great info

[@rodinnyfotograf]

Hello - just a quick question - Does Ulanzi base plate (Falcam F38) fit into the original DJI Quick-Release plate or you have to buy first a SamllRig 3061 plate and then put Ulanzi into it? And what about the safety pin on the DJI/Smallrig base plate - does it work/keep with Ulanzi base plate? To makes it safier - so it will lower the risk of fall off?

[@Micah-Woods]

I've been in a conundrum trying to accept a system to use; a camera grip in conjunction with a quick release plate. The problem is the weight distribution with the Weebill S! This release plate seems much more simple to release the camera off of as opposed to your current plate, which I also have. Solid video man!

[@GratefulGlamper]

Hey there, quick question for the Weebill S. Do you just put this plate on the existing plate that came with the Weebill S?

[@Micah-Woods]

@@GratefulGlamper you should be able to, yes.

[@southernsimpson625]

Please make a video about how to attach the quick release to the base plate I cannot figure it out and there doesn’t seem to be any resources for it

[@trailmommatravel]

I am running into this issue too. Did you figure it out? I have the base plate but no idea how to attach it

[@One2ManyHobbies]

This is awesome, on Amazon they state that it “will not” fit in the Peak Design Tripod, reviews also support this, saying that it is loose? Do you have a newer model why does your fit & others aren’t ??

[@PeterMakholm]

It varies with the gh5 it works perfect but if l have a cage on it, it is a bit loose. I have now added the f38 baseplate to the peak designs tripod to solve the problem.

[@UrdazFilms]

@@PeterMakholm u need to make a video on this Asap! I ordered the quick release system bc of your video. But sad to learn the f38 plate dont work with the peak design capture v3.

[@davejohnson3908]

@@UrdazFilms I just got the Capture 3 as a gift and was really hoping I could order this system for my Weebill S. Peak Design doesn’t have something that will work with the gimbal baseplate. This looks like a solid solution

[@YoungBlaze]

the issue im having with this is that when i have the legs connected like you do, it tends to comes a loose and i have to keep tighting up the baseplate to the camera, but i see you have something extra on yours

[@JGazze]

I appreciate the no nonsense review and info

[@joeumali7375]

holy crap 3:20 until you talk about the actual product.

[@trailmommatravel]

Do I need to replace the plate on my rsc2 to be able to mount the base plate onto it? I bought the ulanzi claw r085 and it won’t go on the native rsc2 plate and there are no tutorials on how to actually get it on that part.

[@darrenrowlands7848]

Same thing just happened to me!

[@LadyoftheFarm]

Yay! Thanks Pete yet again, and this one for me is also just in time!

[@PeterMakholm]

You are welcome.

[@fromia1]

The Smallrig plate has a safety pin, but it doesn't lock the Ulanzi base, is that the case for you?

[@twohappyhomebodies9750]

Thanks again for putting this video together, I did end up getting one of these and also one another KZbinr I follow recommended. Your version was double the price and guess what, it was well worth the money. So much more sturdy and easier to connect, great build quality. I went and got 3 more so I could put one on my Gimbal, tripod, and gorrilapod for my Camera, phone mount, and gopro. Easily saves me 30 min+ every shoot.

[@helencogan2187]

THIS IS AWESOME!!!!! Thank you...great video !!!

[@PeterMakholm]

Always mate.

[@09williamsa]

Hi Peter, I already own the F38 quick releases and use them with my Weebill S and when putting my A7III on my tripod, as per your recommendation. I am now planning to flush out my handheld rig by adding the Smallrig cage to my A7III, a basic 15mm rail system, top and side handles, and then the new Smallrig mini matte box. My question is do you think the F38 plates mounted to the bottom of my rail system would be able to take the weight reliably when say placed on a tripod? Ulanzi quote them as being able to handle up to 15KG of weight, much more than my rig would come to, but I wonder if you think this holds true?

[@digitalvizun5678]

Been waiting for something like this.Thanks for this video. Going to get a couple of these.

[@PeterMakholm]

Yes. They work so well. Finally a compact and good quick release plate.

[@muteoptics6737]

Great review dude. great to see a quick release plate that can replace Zhiyun's plate

[@PeterMakholm]

Yes. I is the perfect quick release. It is small and strong.

[@LCExplore]

does the peak design base plate work with the F38? i prefer the PD backpack clip but would love to be able to use these with same plate.

[@PeterMakholm]

I will try the peak designs base plate when I get in the studio today, I will get back to you.

[@SDygP]

That would be stellar!

[@LCExplore]

@@PeterMakholm Thank you! Fingers crossed! If it works (or the Ulanzi plate works with the Peak Design Capture clip) then I will be ordering probably 10 of the Ulanzi quick release plates... otherwise, maybe we will have to petition Peak Design to do something similar... am a big fan of both companies, and think Ulanzi innovate a LOT as well as keeping things at a reasonable price point, but on this occasion - definitely prefer the Peak Design backpack capture clip.

[@SDygP]

@@LCExplore I've seen a few reviews now, and unfortunately it seems like the F38 will not fit in the Peak Design backpack clip :( Hoping that Pete will prove it wrong though!

[@LCExplore]

@@SDygP that's such a shame...If there isn't a way to use them together, I don't think I can give up the use of my PD clip as I love being able to remove my camera with one hand especially with the one I keep on my belt. I was so excited...

[@twoturntablesandamicrophone]

Love your channel! Informative and lifesaver sometimes. Thanks!

[@Titancarreon]

3:52 for the camera strap. As a main photographer, second videographer, would the camera strap be compatible with my LEATHER HARNESS for my camera? I imagine using this on a leather harness then transferring to a tripod if I have to. I highly appreciate if you could give an insight thanks.

[@KevinMullarkey]

Impossible to get perfect balance when using the F38 baseplate with the Z Weebill 3E gimbal

[@TetsusaigaDrgn]

Thanks peter for making this video. I ended up buying 2. Unfortunately they dont work with my setup, which is an a7r2, with a 24-70gm, on a weebill s The problem im running into is 1) the camera doesnt balance on the gimbal with this quick release and 2) the evf hits the gimbal cause the camera is not far enough foward I might just stick with the weebill s quick release. Do you know by any chance whether manfrotto tripods can accept the weebill s quick release and which one? Thanks in advance

[@Marco-zp7nb]

hi Peter, you are combine the Falcom 38 with your PD Travel Tripod. Mine wobbles a little bit. ist das bei deinem auch so? Thanks for a answer. Marco

[@innsvp]

This fits PD plate?

[@cassieangeline]

Thanks for the video - I bought two of the Falcam quick release plate systems to quickly go between my Weebill S and my tripod with my Canon 5D Mk IV paired with a EF 24-70mm f2.8. Unfortunately, I am having trouble balancing the Weebill with the quick release system in place. I can balance the tilt axis front to back, but when I try to tilt the camera to face up, I cannot get it to stay in place. The same camera/lens setup balances fine with the Zhiyun quick release system, but I would really like to use this quick release system! Any advice? Thanks!

[@thebasinmusic8259]

This is the EXACT problem I am having. The Falcam raises the height of the camera to the point where it cannot be balanced in the face up position. Really frustrating because I get perfect balance when I attach the camera straight to the OEM plate.

[@thebasinmusic8259]

If you come up with a solution let me know!

[@julianuk3266]

Just picked up 3 of them. Thanks Peter

[@sardanapalos]

i bought this but the DJI plate makes the camera go really high and it cant be properly stabilized.... how you stabilize it? are you using something different? on this video its not easy to see how you mount the camera with falcam from ulanzi and Dji plate....

[@PagosaCreative]

Maybe you've got the answer. I've got a smallrig cage on my fuji XT4. I've got a DJI rsc 2 gimbal and a tripod that takes arca swiss. I want to switch from gimbal to tripod easily. I can't seem to find any adapter for this.

[@Arunbalaji87]

Thank you for the video, I have been taking photos for years. Now I'm planning to take videos. I like to know what is economic video monopod which works with Ulanzi Falcam f38 quick release plate ?

[@MortenTelling]

Can you recommend a quikcrelase plate that makes it possible to shift my GH4/GH5 from the Weebill S (that uses Zhiyuns own plate) to my SIRUI tripod (that uses manfroto quikc release)? I want to use the followfocus on the Weebill from time to time, so the Ulanzi does not work? At least that what you say in one of your videos? Any clues? Thanks in advance....

[@elmegade3]

The BIG question is does it slip / rotate whilst mounted? I cannot see 2 sets of locking pins.

[@keithahlstrom176]

Great…”but”. So if you get the f38 ballhead and put it on a normal sized tripod you will find you can’t rotate the tightening/loosening mechanism because it sits too low and it hits the tripod when you try to loosen it. Now I need to build a riser system.

[@rosyaugust7095]

I just bought after I watched your video. But haven’t received yet. Thanks mate

[@dinodevtech1077]

Thank you, love your video! 👍👍👍

[@daddymoesby_8239]

passer ulanzi f38 med peak designs capture clip?

[@PeterMakholm]

De har lavet en som er kompatibel med peskdesign. Har bare ikke fået lavet videoen om den endnu.

[@lindstrem]

What is the payload of this quick release? I cant find this info anywhere, i am hesitant to put a heavy lens with a bmpcc on a gimbal with this specially when they dont disclose the payload max...

[@TaoCovillault]

Quick release system is a mess to choose oO I started with the Manfrotto RC2 on my Weebill-s and tripod. It was good for a time but when I started using Peak Design capture clips I had to get the dual PD/Manfrotto plates, which bring some limitations (only 2 sides usable on each system) Then this summer I switched to PGYTECH quick release, which is very nice, and include the compatibility of my Osmo Action too, but I still love to use the Lens Holder by Peak Design and this fits only into the capture clip... So I have now on my backpack a Peak Design capture clip on the removable belt (Lowepro 450 AW II) AND the Bettle from PGYTECH, which means my technical belt cannot hold my camera and my backpack strap cannot hold my lenses... A little clunky :/ Now I'm considering the Falcam system which has many advantages, integrating their F38 plate in a very slick cage (and a secondary one in portrait too oO), having the modularity of the f22 mount for lights or monitor etc, but, I would still have to keep the capture clip for the lens holder 🤔 I'm a solo nomadic (backpacker) filmmaker, one man crew and I feel all those brands have cool ideas but none is ticking all boxes for me :/ And switches are getting expensive in the end! I just need efficiency and modularity to cover all my needs... I would try everything to never have to screw anything again xD

[@davethompson956]

do you use the same plate with UURIG DH14 handle on your Weebill S?

[@bj1676]

Hi Peter Was hoping you can help me I have the following equipment. 2 x Sony A7R4 1 x Sony A7SIII 1 x Zhiyun Weebil S and the Manfrotto Quick release plate 1 x DJI Ronin RSC2 I wanted to easily swop the A7SIII on both the Ronin RSC2 and Weebil with minimul fuss and not sure what Ulanzi items I need to acheive this from the following Falcam F38 Quick Release System F38 Quick Release System for DJI & Zhiyun Stablizer I'm also thinking of these for my A7R4's 2x Falcam F38 Quick Release Backpack Strap Clip 2 x Falcam F38 Quick Release Camera Strap Clip Also how does the following fit into the above Ulanzi Claw Quick Release Set (Generation II) I tried reaching out to Ulanzi but receicved unclear information back. Thank you

[@bobkrist1]

I bought one, and it is not Arca Swiss compatible with my Really Right Stuff clamps...it's a shame...it's a beautifully made piece, but it is not Arca Swiss compatible, unfortunately

[@Jaibytes]

But Is compatible with zhiyun weebill S???

[@filipponascone4634]

@@Jaibytes yes, I’m using it with no problems. It is awesone

[@SuperfanzX]

Thanks for the review. I'm curious how this compares to Ulanzi Claw system? The claw also suppose to work with gimbal and tripod as well ?

[@richardpascarelli4134]

I like this a lot however it does not work with the PD tripod and you can’t attach the focus motor on the Ronan RS3

[@PeterMakholm]

There is a version that fits eith the PD clip. If you add the quick release to the original plate the follow focus willl fit.

[@OverNoobin]

Yes! One of my biggest complaints right now is running GoPros & a Sony ZV-E10 & switching out all the accessories. My question is: which is the part that attaches to the camera & which is the part that attaches to the accessory? Ulanzi’s website isn’t quite clear, I’m a noob, & I know I need more accessory attachments than camera attachments. Thanks for the awesome video!

[@nettion]

does this quick release place work with the Crane M3 gimbal?

[@PeterMakholm]

Depending on what camera you have then it might. It did not work with my Lumix s5. it fits on perfectly, but the camera will hit the roll motor in some positions.

[@nettion]

@@PeterMakholm thanks for getting back to me. You’re amazing. I have a Sony ZVe10

[@Jaibytes]

Works with zhiyun weebill S perfectly? Without tall or weak because others Quick release from ulanzi have Many problems with resistance and strong construction

[@PeterMakholm]

It works perfectly. I haven't had any issues with it yet.

[@Jaibytes]

I was thinking of buying the plate and Quick release from smallrig but I think you are right that it would take time adjusting each time, my gear is Sony A7R III with Batis 25 mm, placed in a Smallrig cage, you think this Quick release from ulanzi + cage + Quick release zhiyun's too tall for the camera? and can collide when making a turn on its axis with the motor from behind?

[@FollowTheJohn]

I just ordered. 8-)

[@109eh]

did you test the Ulanzi Claw II? I'm in doubt about these models of Ulanzi

[@YoussefHallouly]

Hi Peter, i have the Peak design camera clip that i attach to my backpack you know? This comes with a plate, but that won't fit my tripod (gorillapod) i need a quick release system to attach to my tripod that will work with the peak design camera clip still attach to my camera, can i just buy the Falcam F38 Quick Release System and attach it to my gorillapod, will that work ?

[@davidkujawiak7987]

Do you still use it? I ordered the system from PGYTECH lately and it's a bit wiggly. I was wondering if this one is better

[@SwoonandSwagger]

I was reading some of the reviews in Amazon. And it says it is NOT compatible with Arca-Swiss type plates??? The product descriptions says they are. But the reviews says otherwise. I am confused.

[@PeterMakholm]

It is arca swiss compatible. Bothe the baseplate and the quick release plate. I will follow up on this in my next video.

[@SwoonandSwagger]

@@PeterMakholm all good. 👌🏼👌🏼👌🏼I bought two sets. I needed this. Thank you so much!!

[@marceloobana]

This is supported with RS3 mini?

[@RodderTV]

Order today! I was having the same dilemma. . . Thank You

[@ralphdayot9444]

Does the peak design capture clip standard plate fit on the falcam f38 mount?

[@PeterMakholm]

No it does not.

[@itsandrewson]

does Peak designs mount fit on the ULANZI mounts?

[@sardanapalos]

so i can use this quick release on the base of the weebil S and on the back handle instead of buying the transmount quick set up from Zhiyun? am i correct? and to be clear i will need to buy 3 ulanzi falcam release, one for camera and the other 2 as described above, correct?

[@adrianoc7105]

how do you change the button release place from it? On site i see the button release is in the same line to the plate, but yours are in horizotal. How ?

[@techr9186]

any stress test? wonder if that tiny locking pin will stay in place

[@naderessa579]

Do they have one for the ronin sc

[@northparkfilms3045]

I'm a little confused as to how this would go on a Gimbal. Do you put the manfrotto plate then the adapter for the ulanzi on top?

[@jf4259]

Hi Peter, I have a question. When you take the camera off and back on a gimbal, multiple times, using the quuck release plate, do you find yourself having to rebalance the gimbal? A neweer quick release plate that looks much like yours requires me to balance it again. This happens because the qr plate pans left and right a bit. It never holds on very tight. Please let me know how this one behaves.

[@johnlendved]

Unfortunately not compatible with arca swiss. It's soooo close, wish they just would have made it fit!

[@ryanfyfe3281]

Does this quick release work with any arca swiss plate, or is it a proprietary one. Asking to see if it will work with the arca swiss plate on my kondor blue cage

[@jiajianhou426]

does it work with zhiyun weebil S?

[@devincorboy8638]

Does this lock tight enough to hold the maximum weebill s load weight stable? You know that camera can't move at all!...

[@UziMovie]

I can't get this to fit on my rs2

[@PeterMakholm]

On what baseplate are you mounting it on.

[@kakung97]

Is it compatible with peak design capture clip v3?and if it isn't, what should i buy for my 1/4" tripod?thanks

[@yuan-jia]

Do you know if their F22 is also NATO standard?

[@jjgonza100]

Just received the quick release and the UURig gimmal grip. I am waiting for my RSc2 to arrive so i can test them out. So far though the quick release seems to have a great build quality and like you said no wiggle. I currently use the manfrotto similiar to the one in your video and i really like it but it is big and heavy compared to the Falcam release. btw great packaging as well. thanks for the info and i did use your affiliate link in support of a great channel.

[@Rektwiem]

@Peter Makholm, saw these review and blown away by the system as I'm using Peak Design plates for a long time. Have you tried the capture v3 plates on this mounts and vice versa (if F38 plates work on Peak Design capture clips)? Will it work?

[@PeterMakholm]

Hi. No the peakdesign capture clips do bot work on the ulanzi plate.

[@julianuk3266]

Hi i ordered 3 of these. I'm struggling to find a way to get it to work with my DJI Ronin RS2. I can't get the mount adapter to fit on the RS2. I'm looking for a way to be able to switch between my GH06 tripod and my RS2. I can get it to work with my Ikan E-Image GH06, but it doesn't fit on my RS2. Idea's appreciated. **EDIT ** Actually looking closer at your video you seem to have a smallrig base plate on the RSC2.. Is that needed ?

[@MargaretWolfPhotog]

Great video. Honest review. Question: My 5DM4 needs the riser plate that came with the Ronin S. That riser is screwed onto the bottom of my camera. That combination is then atrached onto the camera mounting plate. Id love to use a quick release so I dont have to keep rebalancing my camera. But I dont think the riser plate allows for the quick mount. Suggestions? Tips? Thanks again.

[@adrianwong4655]

I use Ulanzi Claw Quick Release system for my rs2 and tripod. I have put the quick releases on the gimbal handle and undersling attachment. So I can quickly go to undersling mode.

[@SuperfanzX]

I'd just asked Peter the difference btw the Claw and the Falcam. Glad to hear ur use of the Claw is exactly how I also intend to use it for my workflow

[@adrianwong4655]

@@SuperfanzX Also, I use for my peak design tripod. I personally hate the peak design release system.

[@GoandLove]

Hey any chance can you please make a follow up video with this on how to get the release plate to attach to the Weebill S??? I can’t see to figure out how it works and don’t see any videos on it. In particular, I got the “F38 Quick Release System Zhiyun Stablizer”

[@Image1Nation]

I totally bought into the falcam echo system after watching your video. But I can’t find a way to mount the follow focus. Is it possible?

[@DeployedMgmt]

Thanks for this, it was perfect. I commented on your other video asking which you responded on but I swapped that account to a brand account which messed up my prior comments. I'm going to order and if I like as much as I think will get another.

[@anton.scholz]

I bought a few but they were not fully arca swiss compatible with my other arca swiss gear. the mount would slip out of arca plates and so on. I think the product itself is great quality wise but I was disappointed when I tried to match it with my other gear. now I only use the plate and clamp together and do not mix them with other gear..

[@jonaslomvin]

How do I get the quick release plate to not uns rew itself on the RS2 handle? Thanks for all the great tips!

[@jente_dekeyser]

At 7:37 , what lens filter is that ?

[@vengozid]

Can i use this with rs3?

[@filmdreams]

Hello, have you seen the generation II of this product? Looks a little bigger. I think I prefer to buy this one but I was wondering if you've tried the new model.

[@Trevellian]

Great review. Does the tripod/gimbal mount side work (and lock) with other Arca Swiss camera plates, like the Peak Design Standard Plate? Great that the Ulanzi camera plate works with Peak Design tripod, but does the Ulanzi tripod/gimbal mount work with the Peak Design 'standard plate' camera mount?

[@PeterMakholm]

No it is a bit smaller than the Peak Desings plate. But it locks perfsctly on peak designs tripod. You can buy all the parts separately. I am really impressed with it and the first quick release plate that fits on all of my gear.

[@Trevellian]

@@PeterMakholm Thanks for the heads up. The Falcam like a good product, but already have so many of the Peak Design plates. Will keep using the random Chinese quick release mounts that work with the Peak. The type with a side clamp lever and lock, they're about the same size as the Falcam and run about $15 on ebay.

[@rodinnyfotograf]

@@Trevellian Hi, do u have any link to those "random Chinese quick release mounts that work with the Peak."?

[@Trevellian]

@@rodinnyfotograf Search ebay for the terms arca swiss clamp and it will turn up in the first few items. One example is ebay item # 333733976228. (search for that number at ebay) That and similar models are sold by a variety of vendors, most shipping from China, so they take a few weeks to a month to arrive, so suggest buying a few at a time.

[@rodinnyfotograf]

@@Trevellian I tried to search but didnt find any quick release clamp that fits into Arca Swiss mount and can handle my PD plate like orriginal Capture clip (with locking pin). I think locking pin is quite important for gimbal moves

[@rubenborralho]

Can I use my L-braket on that quickrease without use they plate?

[@marcospalacios1241]

does this work with the aircross 2 gimball..? either way extremely helpful and great video...🙏

[@nalxs]

there's an update. ulanzi has released a new baseplate especially designed to fit peak design's capture clip v3 and now there is also a F38 gimbal baseplate for Weebill S

[@PeterMakholm]

Yes. The plate juste arrived in the mail. Video will soon be out.

[@nalxs]

@@PeterMakholm looking forward for that, because I will order too if everything works perfectIy. I heard a rumour that the plate fits in the PD capture clip but cannot be secured like the original. please check if that's true. that would be be bad news.

[@hurricanevision]

great i use Manfrotto good sistem but so bigger

[@vedder7373]

Could I put the base on my current monfroto tripod head.?

[@GoodcoStudios]

Will the PD plate work on the Falcam base?

[@GiorgosDadanas]

Does the quick release mounting base fit directly on the dji rsc2 base?

[@PeterMakholm]

No. It will not. Watch my latest video with the new ulanzi baseplate.

[@GiorgosDadanas]

@@PeterMakholm I already did! Thanks!

[@lcprod]

ok i want!!!

[@lcprod]

done!

[@andres11121961]

Looks good, but overpriced to me, I can buy 3 aftermarket 323s with the price of one of this.

[@comerpalon4419]

Thanks Peter. It's very interesting. But this support has not yet arrived at Amazon France. Maybe too recent

[@PeterMakholm]

Hi, Yes but you can order directly form Ulanzi: geni.us/1zsmT

[@comerpalon4419]

@@PeterMakholm OK. Thank you Peter.

[@shtrudel-pu1cm]

The quick release of the RS 2 is ridiculous. It is not possible to connect a plate like the Plate 501PL manfrotto. Only of DJI set.

[@soupricemf1260]

If the lens is heavy than camera.. like sony a6400 with tamron f2.8 17-70mm

[@PeterMakholm]

Just use the lens support

[@soupricemf1260]

@@PeterMakholm oh it does have the hole for the lens support?

[@PeterMakholm]

@@soupricemf1260 yes. Everything the original plate has.

[@soupricemf1260]

@@PeterMakholm i see.. thanks for the info👍🏻

[@tebogopodile]

Having a quick release is absolutely revolutionary when switching between the gimbal and tripod, but the price point for this one is a bit out of my price range, I ordered one for 11 dollars on Aliexpress just last week

[@julianuk3266]

i did too, but only received the base plate. So you need to order the more expensive pack. For whatever reason they have it listed as a color... White for the plate, black for the bracket, and grey for the kit... i'm now going to have to go down the more expensive route and order the plate on a new order, as i only received the base. Aliexpress is very confusing to say the least.

[@markshirley01]

What if they stop making them as well.

[@PeterMakholm]

That is the chance I am willing to take.

[@tommyg83333333]

There is nothing good about the Falcam F38, I've tried both the Peak Design Capture and the F38, believe me the F38 is an absolute nightmare. 8/10 times you place the camera into the clip it gets jammed and requires 2 hands and force to remove it and realign for another attempt, there is nothing "quick" about the F38 quick release clip. Even taking the back out of the clip is horrible. The release button is in a really difficult position. Also 5/10 times you try to release the camera from the clip it gets stuck. DO NOT BUY THE F38, you'll regret everything about it.

[@rubenborralho]

Can I use my L-braket on that quickrease without use they plate?

[@AlfaMedtech]

Does it work with the capture clip?

[@ulanzi.william]

yes，it works

[@AlfaMedtech]

@@ulanzi.william alright, I’m on my way to buy it lol! I have a KZbin channel as well in case you would like to send me a couple ! :)

@@ulanzi.william what is the size of the ulanzi claw and this model?

[@ulanzi.william]

@ Both are popular ,I suggest you the Falcam