Best Socket Holder on the Planet OLSA Tools

[@weldingjunkie]

HI Guys here is where to find these courtesy of Corey @ S&A Auto .... www.amazon.com/shop/saautorepair?fbclid=IwAR2jktQe7N8K0KsB2_JM9_Dg1GHfTuVEws53RVWdHsbuPFXSyaP5BfARTv0

[@korbynalec2543]

Sorry to be offtopic but does someone know a trick to log back into an instagram account..? I somehow lost the login password. I love any tips you can give me

[@garrettfernando7415]

@Korbyn Alec instablaster ;)

[@korbynalec2543]

@Garrett Fernando I really appreciate your reply. I found the site on google and im waiting for the hacking stuff atm. Looks like it's gonna take a while so I will get back to you later when my account password hopefully is recovered.

[@korbynalec2543]

@Garrett Fernando It did the trick and I actually got access to my account again. Im so happy:D Thanks so much you saved my ass :D

[@garrettfernando7415]

@Korbyn Alec No problem xD

[@normanklein3155]

The best thing is you can just grab the entire rack and stick them onto the underside of the car and don't have to worry about having to crawl out from under the car whenever you're missing a particular size. Also by having the rack under the car, you can just put the socket back into its correct spot, so you don't have to worry about sockets rolling away and getting lost. And yes, all those 30 secs searching for crap adds up. Love these Olsa magnetic socket trays as they have significantly improved the way I work.

[@eddygoodwin7089]

2nd time watching this video, I will be buying some of those socket holders now

[@weldingjunkie]

Eddy Goodwin I love them, I bought another set for my impact sockets and they all fit great too. They are strong and hold up good.

[@andrewscott8892]

I got the 3/8 ones and put my Capri impacts in them, put 8 in the 6, 9 in the 7 all the way to the 22 in the 20. Only a couple didn't fit and I just used a dremel to widen the hole on those few

[@danndyandy]

Those are ok, but VIM Tools has them beat hands down. The rails are low profile and you install pegs to the rails. When you have the peg where you want it, give it a twist and it is locked into place. The rails are magnetic and very strong. The rails also take any size peg. They come in three different sizes and multiple colors. They are made of anodized aluminum. These things are better than sliced bread. Check them out. Amazing!!!

[@Atum_Ra]

Just OCD wise they just look nice and organized 👍🏻

[@1991tommygun]

I like em, the wrench holders are good also

[@branned]

These look neat👍👍

[@chrisharrell2449]

what a coincidence I just bought a three pack of these today off temu for £16+ And ended up having to order another three pack just as you say but they're so cheap I can use the spare three 8 and quarter inch sets for other sockets like * fittings and other things So they won't get wasted, i just will need to relabel them

[@Pens4Life85]

Have you transitioned to the 3-row organizers yet? They solve your gripe(s). Just wish they had all their normal color options, pretty limited thus far.

[@jgeorges3061]

Thanks for the video/info i need to order some of these holder brotha. cheeeeers

[@weldingjunkie]

j georges you’re welcome glad it helped, these things are awesome

[@jgeorges3061]

thank you brotha for this good info i need some off those . cheeeers

[@Chadwhansen3232]

How well have magnets held up

[@weldingjunkie]

Excellent still just as strong they get a bit dirty but I wipe them off before I put them back. Still holding strong all the way around

[@Rudimentary007]

Good info. Subbed 👍🇺🇸

[@davesterl]

Looks good jay

[@JohnnysSpeedShop]

Well crap.....I guess im going shopping now..... 😁😁 thanks for the info buddy....

[@rosinsautofab1956]

Nice harbor freight box

[@weldingjunkie]

Thanks, smart choice to hold my snap on in.

[@strenuousbobbykushner]

Olsa Tools going to fix the lacking slots in the 1/2 tray? Thanks for pointing that out 🙏🏿🙈😉

[@BobD68]

Good video, thanks. I now know what I am getting.

[@mferrarorace]

I'm going to try these thanks!

[@randomrebuilds]

What would the max height be with a deep socket? Trying to see if my drawer will work for this setup I have 3-3/4" to work with.

[@weldingjunkie]

My half in from bottom of holder to top of largest half inch socket is 3.5” so you’re good

[@randomrebuilds]

@@weldingjunkie Awome - thanks. Now if they would re-stock the metric in purple for the 3 pack that would be nice to get the ball rolling...

[@Valamilk]

Sooo organized 😍. Is this how organized your carts and box always are or did you tidy up for the video? .....I think I need to have a talk with Mr. Practical Mechanic about organization lol 😂

[@lowridermig]

😂😂

[@weldingjunkie]

Valamilk haha thanks Val... yes I always try 🤣 I can have a talk AGAIN with Mr. Practical Mechanic but I feel he might be an old dog that doesn’t learn new trucks 😂😂😂 you might have a better shot getting him organized that me. Poor Chad lol

[@Valamilk]

Ill give it my best try....don’t hold your breath 😂😂

[@smoejith9283]

Very nice, but as you say, not space efficient.. and the huge size on the top end.. I do like how you can just snatch a socket out without picking up and holding the tray.

[@weldingjunkie]

@@smoejith9283 this is true. I’ve learned to like them quite a lot of the years since I made this. I still use them today. I have them in the top drawer of my 72”

[@akbychoice]

The thing I don’t like about magnetic tool holders is they grab all the loose fine metal pieces in the weld, grinding process.

[@ohiopipper3956]

That why I am going to buy the tool box widget I can make my own

[@tsant6591]

Some impacts don't fit due to the thick wall of the brand. But there so many options out there now, forget about it lol 😅

[@wolleysegap9740]

Tbats why I didnt purchase them. 1/4 only goes up to 14 mm. I'll just stay with what I have, the post socket holders.

[@weldingjunkie]

Yeah I have the post ones too once I hit 15mm I’m usually on 3/8 anyway so for it good. The magnets are strong the stick sideways on anything without falling out

[@dumpsterfire6351]

magnets....amazing

[@johnbailey9682]

The only bad thing about the magnet is they collect grit dirt and that’s like putting dirt right on your tools .

[@weldingjunkie]

I always wipe them down if I take them out, but yes if you don’t they will for sure. I use tub o towels.

[@MartinGonzalez-sl2kj]

Lowe's has the kobalt line of socket organizer like this ones and are great Magnets hold really strong and don't cost but couple dollars Nowadays everyone makes the same stuff

[@bookmn0926]

Mount the rachets to the lid, then you have room for the other sockets

[@Alanthe918mobilemechanic]

110 for set

[@weldingjunkie]

I’m not sure i bought a year ago they are worth it for sure.

[@cheezuscrust7730]

These are all made in the same factory in ching Chang China I bought the exact same holders but from another brand (power fist) for 12 Dollars each.

[@weldingjunkie]

@@cheezuscrust7730 got a link ?

[@cheezuscrust7730]

@@weldingjunkie I bought it at Princess auto it's the harbor freight of Canada youll pay too much shipping if you order from here bro

[@schlomoshekelstein908]

this shit is $500 for a whole set? you're fuckin kidding me, right? that's more than I paid for the sockets

[@weldingjunkie]

$500 for set? I paid $89, where are you seeing that ?

[@weldingjunkie]

Bro lol Olsa Tools Magnetic Socket Organizer | 6 Piece Socket Holder Set | 1/2-inch, 3/8-inch, & 1/4-inch Drive | Metric Blue, SAE Red | Holds 143 Sockets | Professional Quality Tool Organizers www.amazon.com/dp/B095L18339/ref=cm_sw_r_cp_api_glt_fabc_EBFDA2Z0Z4XEJD9PRJFM?_encoding=UTF8&psc=1