Рет қаралды 86,489
Shopping list/affiliate links (I get a small commission if you buy somethrough through these):
-Replacement board: amzn.to/3JC8Ob7 (Make sure to confirm you have the same pin setup/number when you order.)
- Lithium iron phosphate LiFePO4 12.8 volt 7ah battery. Same dimensions as the original, but only weighs 2.09 lbs. Consistent power delivery and longer run times. I beleive the built-in BMS cuts off the battery if the rider is drawing excessive current due to overloading the motors.
- 5 Amp Charger for above battery, as well as both 6 and 12 vold lead acid batteries. Takes a little over an hour to charge the battery above. amzn.to/426resp
This is how to fix a broken Jeep-style ride-on toy equipped with a Wellye circut board/brain box. These are sold by Walmart online, as well as eBay and a ton of different online retailers under various brand names. It's basically the same product. This might also work for non-Jeep toys. These boxes fail for one reason or another, but are often the cause of an unresponsive vehicle (troubleshoot other things like battery etc.) I over-volted mine by supercharging with an unapproved battery which blew out the main board, as well as the radio/sound effects unit (It was fast though, while it lasted!). The replacement part was clearly updated and strengthened for more current over a longer period, but still not able to go above about 12 volts. This is a pretty easy fix; disconnect the battery, locate the control box under the hood, remove the mounting screw(s), disconnect the wire connectors (some have tabs which require pinching to release) and make note of where each connector goes. Install the new box using reverse install instructions. If this was helpful, drop a like! Stop by my Patreon and say hi there as well: / 1empyre