Best tube bender for your money

$138 tubing bender bought very pleased link below .
*** Bender link ****
amzn.to/33mcVSq

[@cafemotovation1204]

Great video very clear and understandable 👍thank you.

[@chefkendranguyen]

Thanks, man. Very helpful.

[@ddacombe4752]

thanks for this. ive just ordered one of these for a small job so its good to find a video rating it. also nice idea hanging it vertically. i hadnt thought of that and my space is a premium.

[@amcustomfab]

Thanks for watching Yes my space is premium as well. The other upside I found to mounting it vertically is if you have a thicker wall material. you can use gravity on your weight to pull down on it versus stretch senior back and other parts trying to pull horizontally.

[@moosedrummer1]

Awesome. Thanks. It’s on eBay for $99 right now. Gonna grab one up.

[@mini_worx]

Great review.

[@officialWWM]

I bought this and it’s great, I just wish it went up to 1 and a half inches. Oh, and I like you’re mounting solution!

[@410kane]

Lol. This is exactly what I was gonna do. Only difference is I was using exhaust pipe clamps to mount to a round support post

[@kikeragaglia3629]

Genius!!!!!!!!!!!

[@toupsclassroomtoupsclassro9557]

can you bend 1/2 or 3/4 m l or k copper plumbing pipe?

[@brwhyon]

Thanks for the demo. What is the outside width of a 180 bend of 1" tubing ? Looking at one of these to bend seat hoops for motorcycle frames. Thanks.

[@amcustomfab]

9 1/2'' my friend

[@brwhyon]

@@amcustomfab Thanks a ton ! Ever closer to pulling the trigger on one of these, great to know !

[@chasduster]

Will bender work for 7/8 steel tubing .085 wall thanks

[@dutchpearson2022]

Thank you. Am lookong at one . and no i am going to get one

[@myshitonyoutube]

Nice review, I wonder if it works with metric sized tubes. 7/8 for example isn't exactly 22 mm, it's 22.225 and it might be bad for the bend which some people are complaining about. Maybe it doesn't matter if the die is slightly bigger than the tube?

[@amcustomfab]

I think it would work fine with that small difference in size.

[@NaughtyGoatFarm]

Hi mate how does it go with 1 inch with 2mm wall stainless steel? I need to bend up some safety rails for my yacht.

[@amcustomfab]

it should i have bent 2mm wall chromoly with it you might need a handle extension for more leverage though

[@NaughtyGoatFarm]

@@amcustomfab thanks. I ordered one so I guess I'll find out soon!

[@atrank]

One more question that will help us all, and is not available online.... what is the size of the bolt pattern for mounting (3" x 3"? 4" x 4"? etc.)? I ordered the bender and would like to order steel to make a base while waiting for delivery and the bolt pattern will affect the design and size of material. Thanks!

[@amcustomfab]

Bolt pattern looks to be 4x4 in center to center

[@atrank]

AM Custom fab Thanks again!

[@sharktooth1985]

Lookn to but tube bender but there so expensive what wall thickness can this benefits up too? can you bend .06 to. 09 or you think that's getting to big for this

[@amcustomfab]

i have bent .065'' but that is probably the max

[@robmiller1514]

I believe the maximum capacity is 25mm (1 inch) at 2mm wall thickness which is what I need to bend. Have you tried this? How did it go?

[@amcustomfab]

I have done that size with aluminum and it worked well but I have not try ed steel in that size .

[@myshitonyoutube]

It shouldn't be a problem. I've bent steel 22mm x 2mm with a simple copper tube bender tool but it was tough. You can always extend the handle. For me the problem with this tool is that the 22 and 25 mm dies are very large and they should be more than 180 degree in order to bend 180.

[@jasonontherez6668]

Great video, as always... the descriptions for these on Amazon always say "tubing pipe bender". Haha. So, is it a true TUBE bender, or a PIPE bender. I need it for 1/2 and 3/4 TUBE.

[@amcustomfab]

I believe the one that I have is tubing the dyes are labeled in both inches and millimeters

[@scod3908]

The diameters given are for tube which are specified by the OD Pipe are usually specified by a nominal ID You can bend either but results may vary based on how well the dies fit

[@banjomariano1468]

Is that durable?

[@atrank]

The descriptions on eBay say pipe and tube bender. Pipe and tube have different outside diameters for the same nominal size. 1” tubing has a 1” OD while 1” pipe has a 1” ID. Can someone measure the 1” die to see if it is 1” wide or larger? That’s not to say a pipe die won’t work with 1” tubing. Thanks!!!

[@amcustomfab]

I just went out and measured it it is 1.01 inches. Or 25 mm

[@atrank]

@@amcustomfab Awesome. Thank you. 1"+.010" clearance sounds like it's perfect for tubing.

[@dirtylu79]

Hey champion will it handle bending the 1inch, .120 wall tube?

[@amcustomfab]

It might but it would be pushing its limits

[@dirtylu79]

@@amcustomfab what is the thickest wall size it can handle? Thanks for the fast reply.

[@amcustomfab]

I have done 120 aluminum but the thickest steel I've done is 0.065 in 1 in but as the diameter goes down it will accommodate a thicker wall like I have done half inch stainless solid stock with it

[@brucewillers1034]

Price went up

[@amcustomfab]

That is certainly a possibility this video is several years old

[@Skunkhunt_42]

If anything its stabilized even with todays shituation ​@amcustomfab good vid, might go vertical myself 🎉