I managed to get a second top that has wings as well So now I have two decks an four wings all for free thanks for the idea 8:18

Great video. Seems legit.

Guy that table is 1/4 at best. It’s almost hollow

What is the deal with the Jet boat ? It kinda fell off the Radar?!?!?!?!

How strong is this exactly? I'm thinking of building an aluminum frame for a220 gallon aquarium which is pushing nearly 400 lbs dry weight with around 1800 lbs H20.

Do you think this will work on car Alumium trailer fill in screw holes ????? I have changed trailer lights and had to go to other shape LED light holes from old light needs filling ?

LOVE IT!

how do you delete the lines you dont need?

How Propane work with MAG? It isn`t inert gas but produce CO2.

Great video thunks!!!!!

I answered and said, "If I have found favor in thy sight, O Lord, show this also to thy servant: whether after death, as soon as every one of us yields up his soul, we shall be kept in rest until those times come when thou wilt renew the creation, or whether we shall be tormented at once?" 76 He answered me and said, "I will show you that also, but do not be associated with those who have shown scorn, nor number yourself among those who are tormented. 77 For you have a treasure of works laid up with the Most High; but it will not be shown to you until the last times. 78 Now, concerning death, the teaching is: When the decisive decree has gone forth from the Most High that a man shall die, as the spirit leaves the body to return again to him who gave it, first of all it adores the glory of the Most High. 79 And if it is one of those who have shown scorn and have not kept the way of the Most High, and who have despised his law, and who have hated those who fear the Most High -- 80 such spirits shall not enter into habitations, but shall immediately wander about in torments, ever grieving and sad, in seven ways. 81 The first way, because they have scorned the law of the Most High. 82 The second way, because they cannot now make a good repentance that they may live. 83 The third way, they shall see the reward laid up for those who have trusted the covenants of the Most High. 84 The fourth way, they shall consider the torment laid up for themselves in the last days. 85 The fifth way, they shall see how the habitations of the others are guarded by angels in profound quiet. 86 The sixth way, they shall see how some of them will pass over into torments. 87 The seventh way, which is worse than all the ways that have been mentioned, because they shall utterly waste away in confusion and be consumed with shame, and shall wither with fear at seeing the glory of the Most High before whom they sinned while they were alive, and before whom they are to be judged in the last times. 88 "Now this is the order of those who have kept the ways of the Most High, when they shall be separated from their mortal body. 89 During the time that they lived in it, they laboriously served the Most High, and withstood danger every hour, that they might keep the law of the Lawgiver perfectly. 90 Therefore this is the teaching concerning them: 91 First of all, they shall see with great joy the glory of him who receives them, for they shall have rest in seven orders. 92 The first order, because they have striven with great effort to overcome the evil thought which was formed with them, that it might not lead them astray from life into death. 93 The second order, because they see the perplexity in which the souls of the unrighteous wander, and the punishment that awaits them. 94 The third order, they see the witness which he who formed them bears concerning them, that while they were alive they kept the law which was given them in trust. 95 The fourth order, they understand the rest which they now enjoy, being gathered into their chambers and guarded by angels in profound quiet, and the glory which awaits them in the last days. 96 The fifth order, they rejoice that they have now escaped what is corruptible, and shall inherit what is to come; and besides they see the straits and toil from which they have been delivered, and the spacious liberty which they are to receive and enjoy in immortality. 97 The sixth order, when it is shown to them how their face is to shine like the sun, and how they are to be made like the light of the stars, being incorruptible from then on. 98 The seventh order, which is greater than all that have been mentioned, because they shall rejoice with boldness, and shall be confident without confusion, and shall be glad without fear, for they hasten to behold the face of him whom they served in life and from whom they are to receive their reward when glorified. 99 This is the order of the souls of the righteous, as henceforth is announced; and the aforesaid are the ways of torment which those who would not give heed shall suffer hereafter." 100 I answered and said, "Will time therefore be given to the souls, after they have been separated from the bodies, to see what you have described to me?" 101 He said to me, "They shall have freedom for seven days, so that during these seven days they may see the things of which you have been told, and afterwards they shall be gathered in their habitations." 102 I answered and said, "If I have found favor in thy sight, show further to me, thy servant, whether on the day of judgment the righteous will be able to intercede for the unrighteous or to entreat the Most High for them, 103 fathers for sons or sons for parents, brothers for brothers, relatives for their kinsmen, or friends for those who are most dear." 104 He answered me and said, "Since you have found favor in my sight, I will show you this also. The day of judgment is decisive and displays to all the seal of truth. Just as now a father does not send his son, or a son his father, or a master his servant, or a friend his dearest friend, to be ill or sleep or eat or be healed in his stead, 105 so no one shall ever pray for another on that day, neither shall any one lay a burden on another; for then every one shall bear his own righteousness and unrighteousness." .....2 Esdras 7:75 /////////////

Can you try this on exhaust pipes?

Very good video. Now I know what connector to use from my Co2 tank to the Argon gauge. Thanks a lot.

Just snagged this exact table saw off FB marketplace for $40 because the switch doesnt work anymore. Thank you brother! Easy Sub.

dude your channel looks like it's right up my ally. Cool intro!

Best explanation on Balance and how it cleans and relationship to penetration that I have seen out of all 30 videos on settings! You are a great teacher! Keep making more videos! Thanks Bro!

Thanks for this video I have been trying to trace a picture in another program and it is a nightmare. Time to learn Fusion 360 I feel (at 70+ years old learning something new is not a simple task)

Where’s the jet boat?

So far you're doing good

Negative......not ground

Can't hit a like button till we know we like it

What happened to the jet boat project!?

Great detailed video. Easy to follow. Thank you,

Exelente!!

One other tip is to put a rule next to the part when taking the photograph.

Wood blocks may help

Did you ever finish!!? I wanna start my build. I need your help

First time I’ve looked at your page. Very good video. Enjoyed it. It was nice to see that you included a comparison to the newer Gen 2 machine. Good job.

I was surprised to see you hand fab the trolley parts when you were also using a CNC plasma cutter. I'd also have made the wheels... You have a lathe. Easy peasy to turn down some steel and slip bearings in to it. No matter what you use the steel will be stronger than the plastic on the chimport wheels. An easy brake would be a round disc welded to a collar and use a set screw to hold it on one of your posts. Then have a spring loaded detent that rides against the disc. Put a chain/cable on it so you can pull it down and lock it clear, but otherwise let it just rub against the wheel. Not elegant, but it will give you years of service with little hassle and it will be easy to replace or modify.

Helpfull thank u ❤

I like it and I just threw one away "POOT"

I think a belt sander would be good I built a 26 inch belt sander and it is one of the most used tools in my shop and very easy to build I used the wheels off of a lawn mower deck to run the belt on I put one on a lathe and flattened a little where the belt would run true works like a store bought one

Thanks for the video, What do you think about upgrading to a ck26 torch for the 200+ amp welding? Is that a good idea?

Greetings from Germany, great video and advice. 😊

After heating the aluminum, it's now "annealed aluminum" and very soft, thus beating it will bend very easily. Try heat dipping it after soldering it. Make it hard again.

What is the surface thickness where you drilled the top? Great series!

Very creative and resourceful! Thanks for sharing!

Thank you. Very informative.

The anchor lube spins off completely within the first 2mm of drilling. Better off using wax or a metal coating that stays put. It's just a mayonnaise like emulsion, you can make your own. Better yet go to garage sales and buy old cutting oil with sulfur in it. The sulfur is no longer available as the nazis have taken over.

Great review, thank you!

This is brilliant.

I was expecting the product brand to be called Water Bass. I think you meant water based. Nice looking product though. Appears much cleaner than using oil. I'll definitely be picking some of this up, thanks!

Water ‘based’ lube for the win. Bass is one of two things. A fish, or low notes or pitches. The lube is ‘based’ on water being the initial main ingredient.

4:10 sexy

Either Im dumb or something but it seems it was never mentioned if this machine can use a foot pedal or not which is kinda important

2024 and it's still actual tutorial. Thank you, you really helped me

Dude you are so starter friendly, I just got a machine and have only worked in structural steel for the past 6 months but you make it feel possible to have a on the go cheap table! Awesome videos keep it up 👍👏

Can you run a foot pedal on this machine?

This review convinced me to just now order that Mig 180, it will replace my 17 year old but still working Lincoln HD3200 weld pak. Great review!👍

I got the same one, and absolutely love it!! 💪