Waiting for the roommate to move out feb. 1, then it's no holds barred
@LifeSizeBox3 жыл бұрын
How’s it going now? Any update?
@JohnJohnson-yc7wv Жыл бұрын
How did it go?
@Ikh.m23 күн бұрын
How’d it work out for ya
@chrisparker70162 жыл бұрын
A few nuggets of gold in that video, thanks for sharing
@lonnieb47234 жыл бұрын
Andrew, thanks for breaking your ventilation system down from the Lab to the grow room. And explaining the advantages of positive pressure in the Lab and negative pressure for the grow room! 👍
@TRINITY-ks6nw2 жыл бұрын
I have not looked at your videos since the beginning Your progress, humbleness et practicality is awesome and refreshing Proud of you et for you
@sidneybooher73253 жыл бұрын
You dont over explain. I love how informative your videos are. Ive learned so much from watching them. Thanks for being an inspiration and sharing what you've learned along the way.
@bcarroll03 Жыл бұрын
You can use a higher pressure blower to introduce a venturi effect in a duct using air outside to "push" inside air out.. You can keep your blower out of the path of the exhaust, we use bounce house blowers to create this effect in bag making to keep our fans out of the exhaust. Works great but is energy intensive
@CMZneu4 жыл бұрын
I have been reading up on ventilation in preparation of building my new grow room and i was surprised to learn that sharp turns in the ducting really affect the flow rate of fans so you might want to look into it and maybe trim a bit of the duct in 9:34 so there is more of a straight line, unless there is a reason for it. Great video! how about temperature, is your incubation room warmer than your grow room? do you use an AC anywhere?
@Barnalicus3 жыл бұрын
A sharp corner in a metal dryer vent almost burnt my house down! Lint built up in there, and someone put the lightning rod a bit too close to the duct...
@xochilart71994 жыл бұрын
I really appreciate all the rune symbols you have on all the doors/ around the mushrooms.
@Mossycreekmushroomsofficial4 жыл бұрын
Thanks! We like to personalize our area! :)
@lisareneed2 жыл бұрын
The best video/explanation I've viewed. Thanks so much for your time and sharing your expertise.
@pluto32754 жыл бұрын
Perfect Andrew! Perfect information for the person trying to put the BEAST (aka all the diy engineering) into ACTION! Addressed every question I had in this regard. I'm sure you were helpful to others in this stage of planning and its very easy to follow your information. We look forward to the first multiple 12lb bag oyster flush! The Frankenstein I built indoors. 2'x2' ft hepa merv13 @290cfm.... Lab: 360cuft Fruiting: 420cuft Positive pressure lab and a negative fruiting room...the laminar flow blower is powering the fruiting room exaust at the moment @ a constant 290cfm. Also positive pressure from the lab is used for blowing the 12disk fogger @ 290cfm. With this rate of flow 290cfm: HI RH% 82 Low RH% 70 It goes from 82% to 70% in about 11 and 11 minutes from 70% back 82%. Inkbird controler. Seems like plenty of airflow but I dont know until I get there. I could increase airflow if I wanted. This is what Im starting with. Thanks for the help!
@SS-fs4lm2 жыл бұрын
ok that time it worked ya made me subscribe . ive watched the knowledge you share and i find it awesome thanks man for documenting your progression i will be selecting the vids in gratitude that i need to watch . i am a beginner and i want to thank you , thank you .
@SS-369633 жыл бұрын
To help save on replacing fans, what about putting them on the outside of the grow room and creating a venturi with piping to suck the air out. No spores going into fan.
@mrush81294 жыл бұрын
At 12:56 the bags all have an asterisk (*). That reminds me of Kurt Vonnegut.
@Time4Thomson3 жыл бұрын
Thanks this is great - thank you. We're just starting off our farm and there aren't enough videos like this to navigate the trouble spots!!!
@theonehavingthekey59664 жыл бұрын
Great in detail and informative. Thanks for sharing!✌👍🤙🍄🙏
@stephenriordan26164 жыл бұрын
Very informative! Nice one!
@damianhealey57602 жыл бұрын
Bro I love your HVAC strategy!
@3scaP3r Жыл бұрын
so cool, thanks for the pro tips bro!
@SandraAnnEvans4 жыл бұрын
ANDREW + SAMANTHA THANKS SO MUCHO! LOVE YOUR INFORMATIVE VIDEOS! YOU GUYS ARE AWESOME TO SHARE YOUR KNOWLEDGE AND OPERATION KNOW HOW! Also, thanks for putting your name up so that I can see it; sometimes you say it so fast and I am so s l o w that I couldn't quite catch it. Your mushroms are SO BEAUTIFUL!
@jessicaray78364 жыл бұрын
This is such a neat, informative video. You guys are awesome!
@Nem_Pro. Жыл бұрын
Thank you for this, I especially appreciated the idea of using your laminar flow to create positive pressure in your lab. May I ask what fan you are using to make this work?
@DevoutJourney Жыл бұрын
This is my biggest hurdle right now is FAE
@tybrady19354 жыл бұрын
That's a lot of necessary air exchanges. I'm curious how do you heat or cool your incoming air? Is it done inline in the duct? Hopefully for many months you don't need to heat or cool. But what about the cold winter and hot summer months?
@4corander3 жыл бұрын
Thanks for the video, very informative pal. God bless
@perryvincent90443 жыл бұрын
Excellent video! Does it make more sense to have the exhaust fan down low to pull more CO2 out of the grow room?
@curtislowe13732 жыл бұрын
Wondering the same.
@lindavallentyne38734 жыл бұрын
Really enjoying your show. I hope you splurge this Christmas and get yourself a proper lab table surface. Hoping you and your family have a great smaller holidays. Oh, you might want to do a white board drawing of the flow from room to room. It would save your voice for the important tips about how to read your mushrooms. T.Y. Looks like you will be renting warehouse space before you know it. Well done.
@Mossycreekmushroomsofficial4 жыл бұрын
Yep, yep, and yep! Check out the latest videos! You were right!
@archiewebster50346 ай бұрын
Great video thanks for the info. However, does jet washing the fans not wet and break the motor ?
@NeverDNF2653 жыл бұрын
I friggin love your setup and def alot of good information. I'm starting to get into growing gourmets clearly theres money to be made so gonna try it's kinda cool that like you can make money off of mushroom letting mushrooms do what they do colonize and fruit.
@wendyjohnson51763 жыл бұрын
Great info…. Much thanks!
@WaynerNC294 жыл бұрын
Great Information. Gives me a good place to start designing out my system. Thank you for all Y'all do!!! I sent an Email with the Indigo Milk Caps pics as promised. Have an Awesome Day!!!
@dohthdo574 жыл бұрын
Thank you my friend. Great video
@PoljoprivrednoGazdinstvoTodic3 жыл бұрын
How you control temperature in grow room? How you heat and how you cool your grow room?
@abdelhamidnachabeh56453 жыл бұрын
Beautiful explanation
@vitopettito16892 жыл бұрын
Are those holes in your flow hood repaired with silicone caulk? I only ask because thats what my flow hood looks like and I’m glad I’m not the only one!!
@wande.r2 жыл бұрын
It would be great to see an update on your preconditioner and HVAC solution ? Would you be inclined to place an air con unit in the preconditioner to control temp before : 1. Pipe some conditioned air to lab via flow hood and multiple filter setup 2. Send remainer conditioned air to incubation to create a positive pressure environment, @ 20 c approx 3. Create a negative pressure environment in Grow or Fruiting room to extract co2 and maintain fae. 4. How would you increase the temps slightly in the grow room to 24 c ? For optimal fruits? Conversely, in the summer you may need to chill to 24 c? For optimal fruits? So would you consider replacing a heater, with an additional air con specifically for the grow rooms only ? 5 or is have two different room at two different temperatures to hard and wasteful to achieve? So, best only regulating temperature within the preconditioner at 20 c . So is best to place an air con and optional heater within the preconditioner? 6. Lastly, how do you recover any exhausted heat or cooling ? Probably with a radiator tied into the HVAC that works with the preconditioner? A bit of a ramble, too many questions, i do hope to see an update from your new place/solution , will keep tuning in
@jimmyjonestodd25564 жыл бұрын
Thank you andrew!!! Much love brother!
@Sleepszn3792 жыл бұрын
Do more videos like this!
@mishdevlin15904 жыл бұрын
Thanks. I am new to studying mushrooms and it was my first mossy ck clip. I notice your bags in the grow room are very close together. Do you only puncture holes in the outward facing direction? Curious to how you grow them so close and not damage the product when harvesting. Cheers.
@stephenwarrington97193 жыл бұрын
Awesome video thank you for the information!
@williamkreth2 жыл бұрын
Good stuff thanks
@adeledelignette53554 жыл бұрын
Thank you for this video, I’m guessing the same thing happens to cubensis when they’re too much CO2, heard the caps were more a little potent than the stem
@primozermenc4 жыл бұрын
Hi where can i see links for the fans and the humidifiers and hunidifiers sensors?
@stevenbrett10883 жыл бұрын
great video dude.
@amit28974 жыл бұрын
Mossey how u maintain humidity in the incubation room? Don't see may foggers as such?
@SweetLife5294 жыл бұрын
Another great one! Thank you guys ♥️
@bulldogcottone55954 жыл бұрын
Link to your vortex fan?
@bartendersunny12 жыл бұрын
Can you advise what kind of respirator we should use inside the fruiting room?
@michaelleewagaman3014 жыл бұрын
My question is, do you ever clean the ducts? I would think the spores will clog those ducts.
@licornemagique34914 жыл бұрын
Hello ! I have a question! :D (Very rewarding video, thank you) If I understood your video correctly, in a monotube it would be better to put a fan that sucks the air out of the box to reject it outside in order to evacuate the Co2 and to incorporate oxygen? (through other holes + micropore) If this is the case, the risk of introducing contaminants must be significantly reduced in these circumstances. What do you think?
@blairandersen84143 жыл бұрын
High I love your videos and this one was very interesting as Im a newbie and live in New Zealand, my question for you is how many kgs or pounds are your fruiting blocks and if you had your fruiting room in a grow tunnel outside that has natural venting do you think they would go ok.. I can still install a fan if I notice elongated growth yes? Keep up the great videos.
@walkswithcamera4 жыл бұрын
So if you're exhausting grow room air to the outside you must be pulling air from the rest of the house. Right? How does this affect your heating and cooling costs for the rest of the house where your living space is? Or are you pulling fresh air directly from outside, like through the rim joist somewhere?
@sqeekms6186 Жыл бұрын
I think it's better to over-explain than it is to under explain. I think your video was fine
@jonathansukanto3052 Жыл бұрын
humidifier always on 24/7 right?
@silverleapers4 жыл бұрын
With Titles! Get'in all fancy on us!
@nielvanzyl3 жыл бұрын
thank you kindly dear sir
@amit28974 жыл бұрын
How you managing humidity in the incubation room
@emanuelito844 жыл бұрын
Hey! great info! thenks. I have a question, what kind of light and how much do you need in the grow room?
@nawam.56884 жыл бұрын
The whiter light is better 7500k and for the brightness if you can read a magazine comfortably then it is OK
@roxx00883 жыл бұрын
Thank you!!!
@АндрійДанилюк-й6ъ3 жыл бұрын
Hey is that a helm of Awe on that door?
@dnasstrom4 жыл бұрын
Curious why you said not to have a filter on your air fan? Would it clog up fast? Appreciate all your videos!
@jakegardiner61853 жыл бұрын
most of the fresh air in the farm is put through 3 filters so internal air movers are moving filtered air... I guess!
@benredding70802 жыл бұрын
The whole duct setup looked too long and restricted with bends. The filter probably added too much resistance.
@cestlaviehappner1872 Жыл бұрын
So do you put a intake in and out take exhaust system
@TwistedTornsTirade3 жыл бұрын
Nice shrooms look like loads of fun, I have 5 x5 and want to bring up the humidity, The house of hydro has 1 mist maker, would that work for me or should I get the 3 mist maker?
@andreslorenzosantana49204 жыл бұрын
great tips man! how long is the cycle time of black pearl?
@tarheelgarden4 жыл бұрын
10-20 day inoculation fruits from 7-14 days depends on environmental factors.
@tims.4403 жыл бұрын
So useful
@CDCLLC20233 жыл бұрын
What about the big spore holder you carry everywhere? The beard.
@johnbauby6612 Жыл бұрын
At what point are you cutting the bags open? I have oysters that begin to pin in the bag before it is even fully colonized and they poke through wherever they want regardless of where I put the cuts.
@AbbasMomeny4 жыл бұрын
for button mushroom its appropriate to use wood ? its clean??
@paweciemaa60943 жыл бұрын
I have a question what if you change soy pellet for soy flour. What rule have a fat in growing mushrooms?
@ProPlumbing3 жыл бұрын
Might be a stupid question, what if you used an oxygen tank for the fruiting process? Can you have to much O2
@amit28974 жыл бұрын
Thnx for this video...I figure that my incubation room really needs some sort of ventilation...currently it's almost sealed... also, does lack of ventilation during one phase, i.e. incubation, trigger deformed mushrooms in the grow-room? Also, is the a video where you show us an example of various oyester mushrooms it states of perfect, dry, to moist Nd lack of ventilation...that will really be helpful
@mouhamedaminemgarrech31643 жыл бұрын
i think the sharp turn in the ducting is made to prevent any condensed water to reach back to the fan. i also want to know more about temperature (do you use an AC for that ? that's a crucial question for me and i thank CMZ neu for asking it) and the humidifier. As for the video, it's great as usual, thanks a lot.
@GOINGUPGRADE Жыл бұрын
Have u ever turn off the lights in growing room
@grandredduque61454 жыл бұрын
thank you!
@jedz864 жыл бұрын
so for negative pressure, i need one inlet fan that is weaker and one stronger outlet fan?
@blue-flamephoenixrising23984 жыл бұрын
good day to ya,,, I was very sad to know that my computer can not forward to any of the url s being put up,, It says,"because this site doesn't have a secure connection,, I wanted to check some of your grain cultures to order..Maybe when you get the warehouse up and running there will be a better connection,,more secure,, just thought you might need to know this kink.. hagd..
@payno66434 жыл бұрын
Would u say positive or negative its basically means what side of the wall the fan is on??
@JacobBrownacro2 жыл бұрын
You look so mysterious in that mist. You should tell ghost stories.
@nidaassociates74414 жыл бұрын
Hey sir What co2level we need maintain for oyster
@jacobandrachel99572 жыл бұрын
Do any of you all deal with tons of condensation runoff in your exhaust ducting?
@ranjanty3 жыл бұрын
Can someone help me out? I just bought a 40x40x80 inch grow tent. What size exhaust fan would I need? I was thinking a 4inch inline fan would work. I'm just starting and probably wouldn't have more than 4 lions mane fruiting blocks at a time. Also I'm going to try and use my room humidifier on the grow tent. Ok I'm going to sub and hit the 👍 button. Thanks
@curtislowe13732 жыл бұрын
That's what I use but you'll need it running most of the time
@payno66434 жыл бұрын
Positive pressures pushes the door closed negative pressures swings it open?
@hansulrichjohner26943 жыл бұрын
Humid air is less dense than air. Humidity is 804g/m^3, air is 1220g/m^3. What you mean is the mist that is slowly falling down!
@pixelframe49734 жыл бұрын
Fly s attack on my oyester mashroom farm how solve please help
@sidehustlewithmari3 жыл бұрын
Hello there, how about blow the co2 air from the mushroom fruiting chamber into a cannabis grow tent? any thoughts? cheers!
@Dreammeditaterepeat3 жыл бұрын
From your incubation room sure, not from the fruiting chamber, otherwise you kill your plants with spores.
@frasercoasthomemaintenance77012 жыл бұрын
Hi, I stuffed up and mixed by accident two different oyster strains together (Sajor Caju + Italian) Do I get now 2 different oyster growing out the bag or do I just get rid of this mixed oyster mushroom strain.:( :( Please advice Thanks.
@cody.blanco3 жыл бұрын
Does a fan filter unit work as well as your style of flow hood?
@keepthatlilsmug3 жыл бұрын
All my research says doubt it.
@cody.blanco3 жыл бұрын
@@keepthatlilsmug I'm referring to one that's used in medical/ laboratory settings. I found out after researching that the DIY ones are trying to do the same thing as the ones I was talking about
@keepthatlilsmug3 жыл бұрын
@@cody.blanco I probably spoke too soon. What type are u talking about ?
@HeartlandFamilyDesigns4 жыл бұрын
I'm sure that you've said it, but I am unable to locate the answer at the moment. What kind of fan is that?
@henstar3373 жыл бұрын
ECO-PLUS Hurricane Supreme Wall Mount Fan
@joanneferndale1014 жыл бұрын
... ARENT YOU LOSING A LOT OF EXTRACTION POWER AS AIR GOES ROUND THE u-BEND BY FAN?
@demiankedakduhagon22922 жыл бұрын
Hi , my name Is Demian from argentina, i really love your job, and examples flor the mushrooms. I wanna show you some inconvenient that i have un muy grow room, maybe u can help me with your experience
@yemalahyarahmak18093 жыл бұрын
Hi, Faitres vous des envois de seringues vers belgium Vous etes fantastique,formidable.
@denisehelmbreck16063 жыл бұрын
Great video, but can you explain how to dip and clean the fans? I can't find info on this anywhere. Maybe someone can point me in the right direction. I don't want to ruin mine 🙆♀️
@orionishi67373 жыл бұрын
I think he said they just pressure wash it.
@farhadzahir42074 жыл бұрын
blessings
@NightowlProductionsGroup2 жыл бұрын
Wondering what your electricity bill is - makes me wonder how 'shrooms grow in the wild. Doesn't seem possible. Missing something.
@KevFPV4 жыл бұрын
😃
@chameleonbill2 жыл бұрын
Idk if the condo association will let me pull of a system like this :/
@johnhienze23044 жыл бұрын
Where's the B rolls?
@ow27504 жыл бұрын
middlearth mushrooms dwarf
@robertcharles47134 жыл бұрын
Your Troll Was Here Instantly I Was 217 In The 2nd Hour And He Had Already Thumbs Down Haha Haha What A Life Of Trolls
@mr.serpent69092 жыл бұрын
extreme over explanation could not keep up sorry...boring nerdy over information/unit time to get registered into brain...u know your rooms not us..many times i had to pause video to think whats going on from where to where...bad experience..disliked.
@abegrey740 Жыл бұрын
Can you have too much oxygen in a grow room. For example would it be bad to have a CO2 of 200ppm. Is this even possible. I am new to growing and have so many questions.