BEST VINYL WRAP FOR YOUR MONEY (INSANE GLOSSY FINISH)

YOOOOOO what's up fam! Toyota Supra in shop getting a full color change in the newest and best finished film INOZOTEK!! If any of you guys are interested in a wrap, be sure to contact me on Instagram or send me an email for a faster response!! EMAIL: [e-mail]
HOPE YOU GUYS ENJOY!!!!

[@QQQDDD93]

hows this brand compare to Avery and 3m? it is as forgiving as Avery?

[@UNDERNERF]

Where is the totaled S2000 from Chris Harikian? I heared you bought it

[@samsonwraps]

I sold it to another KZbinr that rebuilt the car! I’m currently looking for something a little bigger to drift around and have some fun in

[@YoungSperm]

CK Wraps exposed this company to be another chinese rebrand 😂 dont buy this brand, there is cheaper version from china for same if not better quality

[@icxcnika555]

Inozotek definitely the best gloss paint like wrap. They just came out with cool new colors too 👍

[@JQUICK21]

I need to find a vinyl that is extremely sticky! Or at least much stickier than VVivid....I bought the Vvivid vinyl with 1 inch width from Amazon and to use it by placing strips of it on my wheels. I put it on, used a heat gun since the outside air temp was about 50 degrees and went inside. Come out an hour later and some of the strips were just hanging there and flopping in the wind! WTF? Even after using a heat gun! How frustrating this is! And yes I cleaned them with soapy water, dried them and then used alcohol to make sure they were ready for vinyl.....ALSO, it seems the cap sheet/protective layer was still attached to the film and so surely this would not hamper the film and how it sticks would it?

[@xXmisalisaXx]

Looks amazing, been wanting to wrap my car in this color but can't find it anywhere. Too bad Inzotek doesn't sell to individual private buyers.

[@menayaaqub5653]

I can hook you up

[@sheldoniusSRSlider]

yoo! this car has to much jz pull for vinyl. your going to Gapp some fool and blow it right off, probably have a batman cape for a few seconds. i see some insane ultra gloss finishes butt! some you tubers turned me off Inozetec because of some bad reviews. but someday soon I'm gonna get a roll. this purple is madd! like it allot.

[@prestonklug7792]

what color is this? is it the SUPERGLOSS METALLIC MIDNIGHT PURPLE?

[@T12i99iN]

Damn..fancy coffee/espresso maker..LMAO. You gotta have that espresso to start the day right!

[@samsonwraps]

My girlfriend is a barista & She got me into coffee about a year ago! Best investment ever if your into it lol

[@marcelomaciel6756]

Great work (as always)! How durable is vinyl and how you care for it?

[@samsonwraps]

I’ll add it to one of my next videos since it’s pretty simple to explain. I’ll do a care and life expectancy for you!

[@omarpalafox1391]

Keep up the good work bro 🙏🏽😎

[@samsonwraps]

Always supporting brother! Thank you!

[@Alang_492]

The owner of that car is migueldsm’s friend. Seen him on Miguel’s ig

[@samsonwraps]

Owner of the car is a good friend of mine. His name is Steve!

[@Alang_492]

@@samsonwraps i saw the video where he came to pick it up or drop it off, can’t recall

[@Norvell07]

Daaaaaaamn! I planned on wrapping my Supra in the same color! Super glad you did this, it makes me wanna do mine even more!! Keep up the badges work!🤙

[@samsonwraps]

Thanks for watching!! As far as color, you can’t go wrong with this one! Fits the Supra PERFECT!

[@avpgraphicswraps3894]

Thats what's up bruh!.....I also do all of the prep work myself, then wrap.....90%prep fun stuff.....10%wrap

[@samsonwraps]

100% Correct my man!!

[@ZDemBoyZ]

@Samson Montoya Your a big inspiration to me bro. I am now a certified installer and I'm starting my own business. I thank you for showing you art, and skill. Keep up the good work I learn new things from you all the time. Thank You

[@samsonwraps]

That’s means a lot!! I truly appreciate you watching and supporting what I do! Keeping learning brother 🙌🏼

[@ZDemBoyZ]

I do have a question for you if possible on a issue with clear coat and how to do a wrap on a car that the clear coat is failing.

[@TowProVlogs]

dude looks like ryan garcia 😂

[@GdayFraz]

Man I wrapped a Ferrari in Inozetek and it killed me. Was so difficult solo. Did a model 3 and it was much better but still needed my Waite occasionally. Is this film challenging for you at all?

[@samsonwraps]

It took me a couple cars to gets used to. But I’ve wrapped about 10+ cars in Inozetek it’s self. So I’m used to the material by now. But it’s tricky for first timers/ especially beginners.

[@GdayFraz]

@@samsonwraps I have 11 full wraps and handful of chrome deletes so it was a test for me

[@antoniiocaluso1071]

GREAT job, and all !! Gracie' Off topic, but know...I build Catamarans, and now, after seeing how cool that life worked, I'm building one for moving my cats around!! Thanks, again! Heyyy...are you doing the Marine Industry, too? Lots of boaters might appreciate it. Now, as soon as there's a PV-electric-generating film, THAT's what I'll cover my catamaran's hulls with. Bet there's PV-sails already, so...why not films, too? The price of a 2-part marine paint + primer is crazy-high, so...a UV/slip-resistant boat wrap would be a God-send ! I'll be you will :-) Buona fortuna!

[@gt_v5027]

How tacky is this compared to 3m

[@ItZFlipz]

just like paint

[@Patrick-HD]

Yo do not remove those line from the compressor once the QuicK JAck has a car on it it says it in the instructions too man!

[@samsonwraps]

Yoooo! Your actually able to disconnect it with the car in the air AS LONG AS ITS SET ON THE SAFTEY LOCKS. I made sure before doing so my man!

[@Hypoxica]

i don't like or comment on many videos, but you're actually pretty dope. Respect and much love on your work!

[@samsonwraps]

I appreciate that, thanks for watching man 🙏

[@BigGroovyOg]

Where is the wrap from

[@FirefoxAnna]

What is the color name

[@billligon4005]

Did you have to do prepare any rock chips or scratches prior to wrapping?

[@samsonwraps]

Some areas of the car needs to be sanded. You guys will see that part in the next video. This car specifically had been repainted.

[@billligon4005]

@@samsonwraps So you can "wrap" over a rock chip?

[@samsonwraps]

Yes you can, no problem. A lot of cars do, unless it’s really bad they will request us to sand it

[@frollard]

@@billligon4005 When it's a crazy shiny film like this I imagine the chips would show through and could ruin the chrome feel. It'll stick just fine, but the finish will be worse. As with all things, garbage in = garbage out.

[@trollmunchkinzm4364]

Ya Inozetek is really good there's just one problem. I don't like any of there colors and there's not enough to choose from.

[@kekereske]

Perfect color for that car

[@nickbest573]

Can i have your honesty. Is this hard to do i mean i see your technique and you make it look easy

[@blaideboard2712]

So after everything how much did you pay in total ??

[@SmashWellington]

but how was the finish after squeegeeing ? i have the teckwrap version of this ( black cherry ice ) . it was thick, it was super tacky, and it scratched all over , even with a wet squeegee install . self healing only worked to an extent .

[@Carloves85]

How difficulty are to wrap a Supra u say... 1-10?

[@billligon4005]

So is your shop in California near San Diego?

[@samsonwraps]

I’m in Ontario California

[@alphawrapztv5587]

Yo what leds do you have on the wall they are nice

[@samsonwraps]

Check amazon brotha! 8FT LED SHOP LIGHT

[@kennethaustin2420]

I appreciate you for the information you put in this video and showcasing your skills . Thank you man

[@37izzyyy]

I tried buyin this in there website but they don’t sell to private buyers... what’s the price on the 5x60ft roll for this midnight purple? Parodox sells it for 750$ but it’s a slightly different and darker, this one is brighter. How much for this roll?

[@samsonwraps]

I never worked with there vinyl wrap before so I can’t say if it’s a good material. But price wise this runs about the same.

[@frankies9049]

This men is the best wrapping out there ....the detail 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

[@samsonwraps]

Appreciate that bro 🙏🙏

[@M2C_mike]

Agreed

[@spencerides1951]

Nice vid bro!

[@samsonwraps]

Thanks!!!

[@Dr.Tre35]

Excellent work! Hat over ears looks uncomfortable tho.

[@RicardoLopez-cu7hm]

Have you ever had someone intern for you?

[@samsonwraps]

No I haven’t. I really want to bring on a team to help around but with the pandemic going on I have to wait.

[@RicardoLopez-cu7hm]

@@samsonwraps let us know when you do!

[@jimscott4332]

Grand master of wrap

[@samsonwraps]

Thanks for watching and kind words!! 💪🏼

[@TheBangkit20]

Like 👍👍

[@samsonwraps]

Thanks!!

[@rstezza]

Could you do a detailed video on the door handles and handle cups please.

[@samsonwraps]

Yes the ones on the Supra are actually going to be difficult so I’ll be sure to record them!

[@rstezza]

@@samsonwraps there very similar to my ‘93 mitsu too

[@annestyk]

great job bud, its so nice to see people who are actually "working" on a car. a lot of videos i see are just talking and discussion, thanks so much for posting the time lapse. =D honest to God, you deserve more views, this is a great video.

[@ishyriver1418]

Is any of your cars wrapped?

[@samsonwraps]

Yes, I have a couple wrapped! Doing a clear bra on the next one.

[@ishyriver1418]

Dope 🔥

[@guadaluperuiz5431]

Let’s goo🤟🏼

[@samsonwraps]

Ayyyyye! Thanks for watching!!

[@Nakaamaa]

Yes another great upload

[@samsonwraps]

Thanks fam!!

[@brayanrodriguez3625]

where’d you go to learn all this on wrapping cars? been interested for a while but other than that love the videos keep it up man✌️

[@samsonwraps]

I went to graphic school about 4/5 years ago! Started off as a detailer for another shop and worked my way up

[@nuyires5195]

Grand master of wrap

[@M2C_mike]

I was starting to have withdrawals

[@samsonwraps]

lol thanks for watching man