Best Wolverine MTW Airsoft Upgrades?

[@RoosterAirsoft]

Whats up airsofters, although my Wolverine MTW is amazing out the box, I do like to have a little tinker now and then so I thought it was time to treat it to some of what I feel are the best upgrades you can do.

[@toolman101476]

Lol I see this all the time.... gun shots great till it's upgraded... some things are better left alone.

[@HighKaliber]

This was a solid video! thank you for sharing your results. Im actually going to be testing the setup featured in this video against a harder bucking and an R hopped configuration today.

[@Scouse.Malinois]

Well I'll be leaving mine as it came in the box I guess😂

[@RoosterAirsoft]

They are so good out the box, since this video I've made a few other changes and honestly, it probably doesn't need any.

[@simonrcfpv2597]

You have to reset your dwell , you will have a difference of .05 FPS if your dwell are set correctly and your will have more accurate shot too

[@simonrcfpv2597]

Super macaron of maple leaf silicon version are newer version and better than macaron too , I have it in my gun and it’s shoot laser beam 70meters ++++ paired with pdi 6.05 barrel for a cushion of air protect the trajectory of bb at long range better than tight bore!

[@RoosterAirsoft]

Good point, something else I can tinker with 👍

[@RoosterAirsoft]

I’ve had a play with the dwell, and after thinking I had broken the gun, the shots are more consistent now cheers. Might do a video on how to set the dwell as the instructions weren’t the clearest

[@RoosterAirsoft]

@@simonrcfpv2597 might try this new bucking and barrel out too cheers

[@garyairsoft]

@@RoosterAirsoft what dwell setting on ur MTW. I just got my new MTW I don’t know how to dwell Please make video about dwell setting

[@bubukittyfek]

The most crucial aspect of your video was accuracy and grouping, both of which were tested without a solid degree of control. I appreciate your video but just think you could have thought that bit through.

[@RoosterAirsoft]

I couldn't agree more, I believe I said towards the end the real test will be when I can get it out on an actual game day and get a feel of what has changed over a few games and report back 👍

[@Scouse.Malinois]

Great video mate, not the results i expected though

[@RoosterAirsoft]

Thanks 👍

[@jamesneville441]

How does the mtw compare to your TM. Is it way better on distance?

[@RoosterAirsoft]

I would say its better on distance, but that's quite subjective as I haven't don't any actual tests, or fired the guns back to back. Also I use a heavier weight in the MTW (0.36g) vs the TM (0.32) which could also play in to things - for "realism" though the kick-back on the TM beats the MTW hands down.

[@tylerbednarchik3445]

Which way does the barrel go in the hop

[@RoosterAirsoft]

The end with the window cut out for the bucking.

[@Terminatorbart]

Nice upgrades!

[@ConnorLevi]

3156 Shanny Rapids

[@44isoutthedoor]

I don't know if it is common, but my Phoenix is too thick and got stuck when I installed it in my MTW.

[@RoosterAirsoft]

Strange, I've not come across anyone having any issues and as they're designed specifically for the MTW's maybe you have a bit of a defective one?

[@44isoutthedoor]

@@RoosterAirsoft I would concur.

[@SupremacyDealer]

how did u paint the mtw? like what do I need to cover and or remove ? any tips? If possible i rather cover than remove..

[@bennythebanny]

These are affordable and removable: eu.novritsch.com/de/produkt/ssr15-3d-camo-cover/

[@SupremacyDealer]

@@bennythebanny ty but I wanted to paint it like the mk18 Lukas from T-Rex arms has

[@RoosterAirsoft]

Stripped all the accessories off (scope etc..), removed the stock as well and then used masking tape to cover up any place you don't want the paint to get in (end of the barrel, ejection port, gap around the trigger etc...) then gave it a base coat spray of tan/Khaki. Then did stripes of green and brown. I then had some netting I draped over the gun and did the opposite colour lines, eg. I sprayed green over a brown bit and sprayed brown over a green stripe, to give it some interesting markings/shapes from the netting. I then used some leaf templates and cardboard with jagged rips in it as templates to just fill in colours to blend it all in more - all depends what look you're going for, I wanted something darkish to match a few different terrains, but you may want to use more brighter greens for summer woodland, or more shades of browns and larger leaf templates for the winter. To get the "worm" look, after I had finished painting the gun, use acetone (nail polish remover) and a cloth to rub away paint at all the "touch points" (ie. anywhere you think the gun would naturally get wear-and-tear marks from). Just experiment! Don't make it look too artificial and if you go wrong you can always spray back over it and start again. I have just filmed me spraying a new stock so once I get round to editing it, I'll get it on the channel.

[@SupremacyDealer]

@@RoosterAirsoft hahaha a bit excessive of an explanation thanks xD . I just needed to know what to cover. I'm going to paint it today maybe. something ez like brown and sand beige with some black net marks . I'll remove the inferno and hop up I'll replace it w the new Maxx and 6.01 barrel .

[@RoosterAirsoft]

@@SupremacyDealer cover the holes 😆Good luck!

[@logic1695]

Rooster....where r u bro. Y u not playing and uploading. Get back on it please

[@RoosterAirsoft]

Unfortunately we've recently got a new puppy so all my free time has been taken up looking after her at the moment. I did manage to get out for a couple of game days over the last 2 months though, I'm hoping to release the first gameplay from that later this week so keep 'em peeled 👀

[@frankysfuneral]

awesome

[@antonino_filippini]

Niceee

[@msmithy7813]

Sugru is hands down the best uprgade. Nothing comes close not even Rhop.

[@ALPHACOMPANY2482]

So what we are saying is....upgrading this is a waste of your money ehhh

[@RoosterAirsoft]

When it comes to Airsoft... it's never a waste of money! 😉

[@splashmontana2370]

Great video but you should have got a 6.01 barrel and a g&g green rubber. Love the content bro keep it up

[@RoosterAirsoft]

Thanks! Whats the reasons behind your suggestions?

[@splashmontana2370]

The mtw comes with a 6.03 barrel already so you would need tighter then that. The rubber is a good middle ground

[@RoosterAirsoft]

That may explain why my crono tests didn’t see much change in fps. Although the new barrel I’ve put in stainless steel I believe the stock one is brass? Which should perform more consistently in all conditions. What brand of inner barrel do you recommend as I will get one and compare it to the 6.03, it’ll be interesting to see the results.

[@splashmontana2370]

Yeah the stock one is brass but it is a very good barrel from being stock. Get a PDI 6.01 tight bore barrel.

[@kudote6415]

i think you have a booger in your nose

[@RoosterAirsoft]

😂

[@Robert16689]

So you made it worse😂 "Upgrades"

[@MegaChickenPunch]

Long story short, leave your MTW stock...

[@dannielhodges1561]

No just do your home work first, I run a 6.01 barrel slightly longer than than stock one , maxi hop with yellow bucking and it shoots fine