Just bought this and installed it on my Gen 2 Inferno. It works but u also need the new trigger board and wiring harness to go with it. The only bad thing is that whatever burst you select, you have that for semi and full auto. It basically deletes your selector switch.... feel like maybe that should've been mentioned before selling it
@hadesdogs43662 жыл бұрын
As someone who uses this I have to say the thing as absolutely fantastic and as a novice to HPA as well as a failure in programming, honestly this is one of the most intuitive and easiest systems I’ve used where as someone who runs an LMG, I can program it to do full auto or due to most of our sites being semi can do extensive modifications in or on the field without any form of computer for external or wireless modifications which whilst using a Bluetooth device would be good, unfortunately I find them too confusing as well as a pain to deal with especially whilst in a game.
@ethanherndon97744 жыл бұрын
Thank you guys for making this!!!
@isaacshively67054 жыл бұрын
Cool that it's got burst functions, I recently got a Gen2 Reaper and I got the Spartan so I could semi lock my gun but because I was hpa'ing a Krytac I had to Dremel the inside of the gearbox and my Inferno Gen2 Premium the trigger board fit in my other Krytac gearbox without any modifications
@FOVAirsoft4 жыл бұрын
STOP MAKING ME WANT TO BUY A POLARSTAR! 😂
@17_jager374 жыл бұрын
Why exactly?
@FOVAirsoft4 жыл бұрын
@@17_jager37 cause there expensive duh 😂
@17_jager374 жыл бұрын
@@FOVAirsoft but why would you need a polarstar over a wolverine?
@FOVAirsoft4 жыл бұрын
@@17_jager37 what I meant to say was hpa not polarstar
@FOVAirsoft4 жыл бұрын
Personally, I think there all the same thing anyways. Yeah they have there differences but they all run a little FCU off a little wimpy battery with a tank and line and go BRRRRRT so yeah
@rideordiesquad77003 ай бұрын
Is the emg wolverine inferno the wolverine inferno
@Igai9911 ай бұрын
Does the current FCU work with the discontinued app? I need to set up my dwell and row soon, and i dont want to dissasemble the gun the whole time :X
@puck_ow4 жыл бұрын
Will this work with the Spartan edition inferno gen 2 engine?
@benja74633 жыл бұрын
Sorry Im a little confused Accord the Tuning instructions, when the 7th led is on, in the ROF section, its mean the rof is In the maximun, so that's be 63rps Is that right?
@llamudos9809 Жыл бұрын
Struggling to set the full auto on the FCU. I set the fire selector ion the gun to auto. I go into programming mode on FCU (holding down buttons for 5secs) I select rate of fire switch on FCU. I set it to 6 (full Auto). It fires full auto fine. But when i then move the fire selector on the gun to single fire its also set to AUTO and vice versa if i set single shot. Not sure what i'm doing wrong or is the FCU knackered.
@DavidDuke-vh5oe Жыл бұрын
Hi I have this and having alot of troubles trying to set. At first would fire every time. But was informed to up the dwell time. I have done that and is firing everytime but now the bbs Bearley roll out the barrel. Please help
@johanneskirsch63064 жыл бұрын
Nice to see the new features. But the most important question is still: When will there be an iOS App for the Bluetooth Version???
@tylerwilson44504 жыл бұрын
They actually figured a way around this. Throw your piece of junk Iphone out and get an Android. LOL
@hdvs004 жыл бұрын
@@tylerwilson4450 noice
@jal1874 жыл бұрын
Awesome!
@homeslice63303 жыл бұрын
With the inferno gen2 that you teamed up with Evike does it come with premium electronics or spartan electronics
@deecloon22043 жыл бұрын
Where can i get these in europe?
@hdvs004 жыл бұрын
When are you guys gone update the bluetooth fcu for android 10
@sydtysk4 жыл бұрын
I need that update, too. Don't wanna use my Galaxy S3 any further only for my gun🙄
@WolverineAirsoft4 жыл бұрын
If you haven't yet, please check out this page for the trial update of our Bluetooth FCU. It has been working for most people: wolverineairsoft.com/bluetooth-fcu/
@tomhermans8874 жыл бұрын
When will the bleutooth fcu be fixt??
@WolverineAirsoft4 жыл бұрын
Very soon actually
@tomhermans8874 жыл бұрын
Yes!!!!! I cant wait!
@rexmcstiller46753 жыл бұрын
Can you use the Quake buffertube with this FCU?
@ashethdinnama39134 жыл бұрын
Are you going to make a 7.62 MTW ?
@lucacarmichael92454 жыл бұрын
When will this be released
@WolverineAirsoft4 жыл бұрын
It is already released :)
@mrwaffle67994 жыл бұрын
Mtw release?
@jellevanasperen4 жыл бұрын
Dear wolverine, Nice story and bla bla blaaaa but when wolverine gonna fix the bug on the Bluetooth fcu because it doesnt support with android 10!!! Because now its just trash fot that money!!
@WolverineAirsoft4 жыл бұрын
We have been working on that and should actually have a fix very soon.
@WolverineAirsoft4 жыл бұрын
If you haven't yet, please check out this page for the trial update of our Bluetooth FCU. It has been working for most people: wolverineairsoft.com/bluetooth-fcu/
@Spartan8181TTV4 жыл бұрын
Wolverine Airsoft is there a iso app yet
@Warkeds4 жыл бұрын
Daaaamn I just bought the old one... =/
@MikeD.Productions4 жыл бұрын
you guys should totally sponsor me. we could be of great help to each other