BetaFlight Firmware 4.1 | Accelerometer Greyed Out

[@mattparker5371]

you are a life saver!

[@PassingBy]

Been flying drones past 3yrs. Nothing like my nitro days. I ended up digesting loads of configurations and that drives me crazy. This is a computer based hobby. I want my nitro planes.

[@dialaprohq]

I feel like with every tutorial I watch. I run into a road block thanks for freeing up the obstacles. This was definitely the issue I had.

[@RGMGFitness]

Glad it helped...yeah, its a struggle in the beginning. It gets better..hang in there.

[@jimsdroneing]

A UART (Universal Asynchronous Receiver/Transmitter) is the microchip with programming that controls a computer's interface to its attached serial devices. A UART (Universal Asynchronous Receiver/Transmitter) is the microchip with programming that controls a computer's interface to its attached serial devices.

[@Josh.s.smith88]

This just helped me out massively. Thanks so much man 🙏🏼

[@matiascockhenao8563]

thank you so much!

[@beqashekiladze8937]

Thanks a lot sir! I have one question though. My 'board_name' field on second line shows "MAMBAF7", but closest firmware names in firmware updater is the "MAMBAF722"(which worked). It seems working on my pc and betaflight app, but would it have some complications during flight? It's my first drone and first flight except the sim. And this 'complications' would wreck the machine. Please share any information about this if you have. Thanks!

[@hugoj8177]

Thanks a lot for your help!

[@RGMGFitness]

Glad it helped.... :)

[@henningpehlemann]

lifesaver!! thank you so much for this video!!

[@dtaves]

i got my ports back but i still can't configure

[@jimsdroneing]

you want to get high, fly a DRONE

[@PatrickGuerrisi]

I had the same problem

[@dhimasmei8915]

finally I found this video, thanks man 🙏🏻🙏🏻 but I getting trouble my AUX channel on betaflight didn't work, the AUX show no response when change the all switch, ,so I can't arming or change the mode, or turn on beeper and etc..

[@jpmat2878]

Great ! Thank you ! Actually I flashed 3 times, First: STM32F411, Second: MATEKF411, but finally MATEKF411SE For an Eachine Tyro79 latest version

[@inCarsoNatedFPV]

So, I guess this is my issue but when I plug the drone into the USB port, it’s stopped recognizing that the drone is even plugged in. Please help!

[@igor_vsantos]

Thank you!

[@ferreiraandre1485]

Thanks for the video. I thought my flight controller was dead. nice video thank you

[@Flow_977]

I reset fc but i lost my backup file so what can i do any solutions plzz help me

[@RGMGFitness]

Most of the bigger bind-n-fly sites have the original configurations available for download.

[@vinc878]

I love you

[@jimsdroneing]

how about "My wife is the real PILOT, I'm her co-pilot

[@CarbonGlassMan]

Thanks man! A website told me the wrong firmware. I found the right firmware and flashed it and it's working again.

[@RGMGFitness]

Glad it helped!

[@noahlive1321]

Thank you so much saved me a lot of stress!

[@RGMGFitness]

Your welcome..glad it helped.

[@ChristianTangoan]

Mine still doesn't work :/

[@astemerkhota4923]

Hello.. i did exactly the same .. i connected the radio to the receiver without problem. BUT , when I move the sticks or switchs , nothing happens. I would be thankful if you could help .. Thanks in advance

[@RGMGFitness]

Hi..I tried to find you a video to identify exactly what may be your issue. Couldn't find exactly what I was looking for. I would go over to Joshua Bardwell's KZbin channel and search on BetaFlight videos. Just don't know which one to point you too. I'm sure he has it covered there somewhere...just not sure exactly where.

[@astemerkhota4923]

@@RGMGFitness thanks for replying.. but I did search a lot , couldn't find anything

[@RGMGFitness]

Can you give me the exact Flight Controller Model your using and BetaFlight file name your trying to flash to?

[@astemerkhota4923]

@@RGMGFitness succex mini f4

[@RGMGFitness]

​@@astemerkhota4923 One other question...was this ever working...and if so, did you save the original "DIFF ALL" file from BetaFlight? If you did, just paste those first few lines here and it should show you the Firmware you should be flashing to....I didn't see it listed on the manufacturer website. Looks like iFlight uses the "Succex Mini F4" on several of their BNF units. If this happens to have been a BNF (Bind-N-Fly) you can actually download the entire original BetaFlight configuraition from here. Again, not sure if this helps you. iflightrc.freshdesk.com/support/solutions/articles/48001148115-firmware-wiring-factory-dumps

[@jimsdroneing]

Theres my contribution Ron great info

[@RGMGFitness]

Thanks for the feedback!!

[@Gabriel_FPV]

Thanks for your video !

[@RGMGFitness]

You bet!