BetaFPV Air75 | Setup, VTX Testing,

[@jumpstartfpv]

Just a tip. You can create a backup from the Presets tab. Can also restore a backup from there.

[@DaxNealFPV]

True. This is how I learned, so it just second nature.

[@droneready8278]

... I would think you would change the motors before you change the board 🤔... If the board wears out before the motors do I would think about using a different board to begin with....

[@universalhead]

I stress relieve the canopy with a heat gun and hot glue the u.fl down and in the hole where it pokes out.

[@jumpstartfpv]

450mw stable is good for an 5in1 omboard vtx board.

[@DaxNealFPV]

@@jumpstartfpv yeah I was pleased to see that too!

[@aureliensegond5801]

Thank you for the video! I really appreciate the thorough explanation. Could you please share the model of the antenna you mentioned? I lost mine in the field and I'd like to try the one you suggested to see if it improves the signal. I like the form factor and the mini flag aspect. Let me know. Have a great day!

[@aureliensegond5801]

Oh I just realised you answered somebody else : ORT Micro Vee -- Though I will leave the comment as I really like the video :)

[@DaxNealFPV]

@@aureliensegond5801 www.quadsensei.com/product-page/ort-micro-vee-5-8ghz-u-fl-antenna-linear-white

[@DaxNealFPV]

@@aureliensegond5801 my favorite antenna

[@melvinstewart3718]

Just followed for that preview flight! I be looking for ya 😳😎

[@DaxNealFPV]

Hope you like it!

[@toma417]

Nice, what is the reference of the antenna you prefer ?

[@DaxNealFPV]

ORT Micro Vee

[@bestfield372]

Air 75 bound receiver three plugging way. In betaflight switches working, they are lighting up yellow apart from the arming switch can't arm drone. Can u help, please. This is the second whoop I can't get flying 😂

[@DaxNealFPV]

Make sure you’re not in turtle mode.

[@sosdeathvalley]

Do they not have them without the vtx like to use Walksnail

[@DaxNealFPV]

@@sosdeathvalley only analog. For WS and DJI, 2s is really the best power train.

[@sosdeathvalley]

@@DaxNealFPV I need one do they make them

[@therooster_]

Is there any way to do this without 2 wifi adapters?

[@DaxNealFPV]

@@therooster_ yes. Solder and FTDI adapter to the pwr, grd, rx, tx pads and flash over the uart instead of wifi.

[@therooster_]

@@DaxNealFPV I actually found another way… on home internet just hit build on elrs configurator then it gives you the firmware file. Then on elrs internet you can go to scroll down and upload a file to flash from. This is actually the preferred method for according to Joshua Bardwell

[@DaxNealFPV]

@@therooster_ if you have wife on your pc, yes. Didn’t sound like you had wifi option

[@therooster_]

@@DaxNealFPV ohh I see. Yeah I have one wifi card but not a second adapter

[@JamesTsang-be4cf]

Bro I’m trying to bind my ELRS literadio3 (from my Cetus X) to my Air 75 but having no luck. Tried bind phrase on RC betafpv configurator, copied the text line into CLI on beta flight and get an invalid error message (but binds fine with my Cetus X) Tried ‘bind receiver’ in the receiver tab, pressed bind button on literadio3 (get 5 red flashes to signal binding is turned on) but doesn’t connect. What is it I’m doing wrong? Any help appreciated!

[@DaxNealFPV]

@@JamesTsang-be4cf radio fw is Betafpv 2.4Ghz Literadio 3 Pro?

[@JamesTsang-be4cf]

It’s the standard Literadio3 not the pro. My FW for the radio is V2 but can’t update to V3 as latest betaflight configurator v2.0.0-RC2 is needed, but is only available for windows. I’m using betafpv configurator v1.2 on Mac…… I’m hoping when I do get round this, the update still allows me to connect my Cetus X too

[@DaxNealFPV]

@@JamesTsang-be4cf you’d be doing yourself a favor and just pick up a Radiomaster or Jumper radio. The RM pocket is $50.

[@chiprobertson3094]

Prearm on a whoop

[@AREK_FLY]

The weight of this drone is ~21g not 17g

[@DaxNealFPV]

I stand corrected! Thank you

[@fastoven]

Is this required

[@DaxNealFPV]

All drones have to be setup

[@fastoven]

I'm thinking of getting this drone but I am a beginner and don't know how to do all that

[@DaxNealFPV]

@@fastoventhat’s why I did this setup video. Left everything on stock and only setup what was necessary for people to follow along.

[@ciarancalder644]

@@DaxNealFPV so if ur pc doesnt have a wifi card u cannot do? I see above u said you have to solder. is this the only thing you can do?

[@DaxNealFPV]

@@ciarancalder644it’s the easiest way. The $20 dongle provides wifi to any pc. Many receivers are now coming with a legacy bind button and you can also power cycle 3 times to put in bind mode but the passphrase is the best method.