BETAFPV Meteor85

BetaFPV Meteor85 FPV drone with Runcam Thumb 1080p camera on top. Stabilised video from the drone in the Gyroflow app.
Get a 10% discount on BetaFPV drones and accessories by clicking this link:
i.refs.cc/lw2uJay0?smile_ref=...
#betafpv #meteor #meteor85 #runcam #runcamthumb

[@BlaqkstarFPV]

Hell yeah. This is one of the videos that helped me decide on the 85 as my first quad. Nice flying man :)

[@alex_k21]

Awesome! Thank you!

[@MirrorBoySkr]

Hi! Great video!!! Quick question. I had Meteor 65pro (ELRS) + RadioMaster Pocket Then I bought Meteor 85 (ELRS). I couldn't bind either by button or by a bind phrase. After a long investigation, I discovered that the Pocket transmitter works on 1000Hz, but the Drone 85 only supports 500Hz. So, I had to changes Packet Rate on the Pocket to 500Hz. So, now both my Meteors are connected with the Pocket. Did you have the same issue?

[@alexanderwharton1434]

Great footage buddy, interesting modifications i see bellow on the comments...congrats!

[@alex_k21]

Thanks 👍

[@babyzeefpv9887]

I have one of these things, and it keeps failsafe thing and dropping out of the sky. How do you have this thing set up in betaflight? I can keep it flying it close range with crystal clear VTX, but for some reason my Little Bitty literadio2 from Beta FPV loses signal. But with the 65pro I can fly that drone pretty damn far away. Any tips?

[@alex_k21]

I did not change the settings in betaflight, all settings are from the manufacturer. I'm using a LiteRadio 3 ExpressLRS 2.4G remote and it has a good connection. When flying over long distances, the video connection will disappear much earlier, but definitely not the connection with the remote control

[@FregoUA]

Огонь бро! Хороший пикник

[@alex_k21]

😁

[@YouFPVtube]

Und wie weit kommst du mit dem Antennen?

[@TheRealFpvKev]

What kind of antenna do you have on those goggles?

[@alex_k21]

Lollipop 4 mini RHCP 5.8G (Long Purple RPSMA)

[@pawelec8076]

what is the antenna on the goggles? Is there a difference compared to the stock antenna?

[@alex_k21]

Antenna -Lollipop 4 5.8G Mini RHCP long RPSMA. Yes, the connection quality is much better if you put the same antenna on the drone (but with a UFL connector). With these antennas, I can fly much farther without signal degradation.

[@pawelec8076]

@@alex_k21 when you change antenna on the drone, did you have to solder that?

[@alex_k21]

@@pawelec8076 No, there is an RP SMA connection. you just need to unscrew the original antenna and screw on the new one

[@nightzx9689]

pls do video about your setup and google modification

[@alex_k21]

I bought a long antenna with RP-SMA connector (Polarisation:RHCP, 5.8G) from an online shop. Unscrew the original antenna and screw on a new one instead, that's all)

[@Flux_vids]

how do you atenna swap the goggles?

[@alex_k21]

I bought a long antenna with RP-SMA connector (Polarisation:RHCP, 5.8G) from an online shop. Unscrew the original antenna and screw on a new one instead, that's all)

[@sharptechnique7883]

Is this the elrs version?

[@alex_k21]

Yes, Elrs

[@RC.Drone.Pilot.Fun.]

Вери гуд

[@alex_k21]

Thanks)

[@megatron187]

how to swap the antenna on the drone tho...?

[@alex_k21]

buy an antenna with the appropriate polarization (RHCP) like on a helmet and a corresponding connector (UFL), remove the old antenna, install a new one

[@YouFPVtube]

Как дальность с этими антеннами?

[@alex_k21]

Качество сигнала значительно лучше чем со стоковой антенной. Дальше 200 м я не летаю, но залетая за дерево помех значительно меньше, на оригинальной антенне можно потерять дрон в 50м за деревом

[@user-wp3cu1eo2n]

😀😃😄

[@ivankoreshkov5140]

Frsky + analog? (From Cetus series)

[@alex_k21]

elrs + analog (VR03 FPV Goggles from cetus x kit, Betaflight FC)

[@ivankoreshkov5140]

@@alex_k21 спасибо 👍

[@wtfhk4864]

How to make Meteor85 FPV drone with Runcam Thumb camera on top? can you take a video :)

[@alex_k21]

The camera is attached with three plastic ties - one long one through the canopy, and two short ties attach the camera mount to the first tie. The camera is powered by the flight controller. I soldered a connector in the corner of the flight controller to the 5 volt pins next to the buzzer pins. If necessary, the camera can be turned off and removed from the drone.