The FASTEST 1S Whoop you can buy | BetaFPV Meteor75 Pro

[@evgeniylarin4224]

Greetings! I came across this video and was impressed by your ability to successfully bind the Radiomaster Boxer and Meteor 75 Pro. As someone who has been involved in the hobby for many years and has always used Crsf, I recently decided to switch to elrs. I purchased a Boxer and 75 Pro, but after spending three days trying to bind them without success, I was ready to return them and give up. However, after finding this video, I am now confused as to how you were able to accomplish the binding. The Boxer has elrs v3 built in, and the elrs configurator does not allow to make a v2 build for the Boxer. On the other hand, the Meteor has v2 on board and cannot be updated to v3. Could you please describe a process of binding?

[@joyceolamiju9173]

Sad.

[@Funcentric]

Been watching you for at least a year. I'm liking the new logo!

[@HalfChrome]

Thanks

[@sonnivega6739]

the wife ducking on the indoor flight, lol great flight

[@dronefilmsgermany]

Can you please share the binding procedure as I have ordered a Boxeer and now planning to order the meteor65 pro. I would like to use your affiliate link if you can provide me.

[@athenovae]

That’s not a throttle cut, that’s a throttle limiter. lol. I was so confused cuz I was thinking why wouldn’t anyone have a throttle cut to disarm the quad. Hahahah

[@walkis19]

binding procedure please, I have the radiomaster TX16S with happymodel ES24TX backpack elrs

[@Mr.FastZombie]

I dont own any or know much about racing drones, but this thing looks so cool. I might have to look into getting one of these or something else.

[@flat-earther]

did you get one?

[@TheRealFpvKev]

I have this quad and love it!

[@HalfChrome]

Me too

[@clifffield1]

I had to double-take for a moment there, I thought I was seeing some scary halloween decoration or something until I realised that one of your daughters (I presume?) was sitting in the swing/rings there. Haha. Cheers for the review.

[@HalfChrome]

Ha. Yup.

[@ericmac564]

Will this bind with a frsky ds9 plus? I bought the frsky version but have been out of the game for a few years and am lost with all the different protocols.

[@serkan5001]

What’s your tuning? Mine has the jitters. Share your settings if possible?

[@HalfChrome]

Mine is stock. Didnt tune anything. Check your props and motor screws

[@chrisbee5481]

Short question: what is the difference between throttle cut and motor output Limit? It's been a while back, but if i remember correct, the MOL truely reduces the max motor output power. Wo why throttle cut? I think racers use it to tame their quads a little. Just not sure exactly why use the one or other.

[@HalfChrome]

A throttle cut will send less power. A motor cut will stop how much power it can receive.

[@MrTrickydon]

Will this fly on 2s batteries??

[@HalfChrome]

No

[@balonius]

Great video, nicely edited. Constructively, could have been tighter in the middle but I will be back for more! Well done! 👍🏻

[@balonius]

Loved your indoor flight footage in particular, very inspiring 👍🏻

[@HalfChrome]

Thanks for the feedback. Appreciate it.

[@drelephanttube]

3:00 you mean PH2.0

[@HalfChrome]

Yes

[@Mr.AlvaroA]

Sorry to bother you, maybe you will be able to help me, I have the meteor 75 pro, the TS16SMKII is updated, bind, etc. The only thing is when flying if by any reason I crash and the drone ends upside down the motors go full throttle and the auto flip doesn't work. Is there a setting for this that I need to change in betaflight? (I already setup the switch for angle and horizon mode and does the same on both modes)

[@isaiah21810]

im prolly ordering this tonight, will this work with the zorro radiomaster and the fatshark scout? thanks anyone who responds

[@HalfChrome]

Yes. Assuming you get matching protocols. Match ELRS and analog and you’ll be good

[@jasonleesuffolk]

Can't decide between this or a 75 mobula7 🤔

[@HalfChrome]

Hard to say. Both are great

[@OkOk-pj6jt]

@@HalfChromewhich would you say is better? Just from your point of view. I can’t decide too

[@HalfChrome]

@OkOk-pj6jt I like this. Or the new Air75

[@FrequentFlyerRC]

Awesome vid! Would be even more awesome with HDZero 👍🏿

[@Braincho]

Hello my friend. Very nice and informative videos! Gratz! I would like to ask you a few things if you don't mind answering me - would be cool. I'm pretty new to FPV and practicing in simulator for now. And want to ask your honest opinion on a Radio(controller) and a tiny drone for indoor and small backyard fly/practice. I'm looking up for a Radiomaster TX12 MKII with hall gimbals or a Radiomaster Boxer. I saw a few reviews and didn't notice a huge difference, but the price is like 50-70% more on Boxer witch at this point is money I would spend on some batteries/charger/props etc. and will upgrade my setup in future if when i commit enough :-) Also ofc to be compatible for some future drones. Also looking for analog drones since I got analog goggles from my friend(no need to buy). What would you suggest, they look the same to me but you probably notice difference. Something like Mobula7, Meteor75pro(betafly), FireFly16(flywoo), WhoopFly16(sub250) or may be something else.(also i see the battery connectors are different, which are more in use so I can use batteries of the drone with future drones) Looking forward to "hear" from you. Thanks in advance!

[@HalfChrome]

Any Radiomaster remote is good. I prefer the Boxer or the Zorro to the 12 but that’s is a preference. Newer BetaFPV whoops are good but I prefer the Mobula6 or 7.

[@Braincho]

@@HalfChrome Cool, thanks. Yes, about radio I was asking for performance and stuff like this, about size and look - ofc it preference, but look i don't mind, the size(i use Flysky for simulator now and i like big radios). Then i will stick to TX12 and will get new betafly75pro and then something bigger 2-4S. Are mobula and betafpv got same batteries connector?

[@HalfChrome]

No

[@Braincho]

@@HalfChrome Thanks! Would you help me with this one? There is choice before you buy. What does it mean? Standard FCC Version CC2500 (FCC) Version supports all CC2500 protocols 4in1 (FCC) Version supports all MPM protocols ELRS (FCC) is pre-installed with ExpressLRS ISM FW (Max power is hardware dependant) EU LBT Version CC2500 LBT Version (Europe) is limited to LBT compliant protocols FrSKY X/X2 LBT & HoTT LBT 4in1 LBT Version (Europe) is limited to LBT compliant protocols FrSKY X/X2 LBT, HoTT LBT and DSMX ELRS LBT (Europe) Version is pre-installed with ExpressLRS CE EU domain LBT FW (Limited to 100mw power output)

[@marinebymistake]

Would you recommend 75 as a first indoors drone to learn how to fly and eventually get the 5"? Or should I go with 65 version, as I'm only going to fly indoors?

[@HalfChrome]

I like the 75 on a throttle cut. Flys similar to a 65. But both are good options

[@scu-dub]

😳....I am in love with my mobula7 1s elrs but....I might be cheating on it lol this is very cool and I'm gonna be stepping up to hd zero myself so this looks perfect and being in da windy city most days it's hard to fly anything lol but this looks like it can handle a little wind👍🏼great review man✌🏽

[@HalfChrome]

Thanks. Going with HDZ is the way to go.

[@FrequentFlyerRC]

The Mobula 7 1S has a 12amp esc and true AIO fc. If you just buy the frame which comes with the props and maybe get the motors, it will more than likely be lighter and out perform this quad 💯

[@scu-dub]

@Frequent Flyer RC man this is my second mob71s elrs lol my first one had the gyro issue with betaflight and I loved it so much I just bought another one lol now I have spare parts that are basically brand new just in case 😁 but I think I want to build up something with more power just don't know what yet😁 just saw your unboxing of the hd zero stuff too👍🏼 good stuff man I was thinking about getting those gogs because for the price and removable screen it's definitely worth it✌🏽

[@HalfChrome]

Sure. It probably would. But you’d have to build it

[@athenovae]

@@HalfChromeI got the Mob7 recently and was planning to get 1002 motors but dang maybe I should have gotten this from the start.

[@cold-frontin_penguin7902]

Hard to pull the trigger on this thing considering beta fpv is usually questionable quality control

[@HalfChrome]

I absolutely understand this. That is true. I get the sense their latest drones are better. Time will tell. I think the VTX is the weak point.

[@cold-frontin_penguin7902]

@@HalfChrome 400mw imo is a bit to high, that vtx gets TOASTY

[@HalfChrome]

You can run it lower.

[@cold-frontin_penguin7902]

@@HalfChrome yea I think k I have mine set to 100mw on my Mobula 7

[@HalfChrome]

Probably the right option.

[@maheshkumar-cs5ih]

Please make a weight lifting test of this drone

[@panintegral4571]

I thought this video was from like 2017

[@HalfChrome]

Because?

[@panintegral4571]

@@HalfChrome Idk, I think it was the thumbnail, but still a good video 👍

[@HalfChrome]

Thanks. Always looking for feedback

[@TTime685]

"Whoop"? lol.. Who comes up with these names

[@HalfChrome]

Not me

[@vicpro1]

@@HalfChrome The name "Tiny Whoop" actually came from a sticker that was meant as a parody for Team Big Whoop

[@hookedfpv3219]

It’s not a true whoop I bet my fractal 65mm with 702 27000kv motors is way better and faster ohh and it’s a beta so that itself isn’t good your stuck with beta parts can’t interact with other parts

[@HalfChrome]

It isn’t a true whoop why? It isn’t 65mm? Your fractal definitely isn’t faster but it certainly might be more maneuverable. BetaFPV has come a long way with their components. They certainly can interact with non BetaFPV stuff.

[@hookedfpv3219]

@@HalfChrome ohhhh it’s faster by being more nimble and maneuverable hands down and beta parts don’t play nice with other outside upgrades like example one you can’t plug in a tiny whoop pinch into it it won’t work solder maybe but I want plug n play and I was referring to to it’s a 75mm not a 65 where I come from 65mm are real whoops the 65 came first thus original OG tiny whoop and to recruit new pilots we need easy simple stuff beta don’t get me wrong isn’t a bad entity just not a beginner option I would recommend just my opinion

[@HalfChrome]

@hookedfpv3219 gotcha.