BETTER ALEO POOL!! - How To Mine ALEO To ZK.Work Mining Pool

[@RabidMining]

Have You tried This Pool Over F2Pool? Are Your GPUs hashing Away?

[@usiffputz6753]

Yes I tried both & the are actually the same in payouts on my 4090s

[@amirazadi6575]

can you post a guide for OSdog?

[@RabidMining]

@amirazadi6575 oh never heard of that one.

[@Roypantera]

Ive tried all 3 pools listed and says unable to connect on all 3 😭

[@andrewjones198]

Hey @rabidmining, BIG shout out to you for having this video up. I have a fair amount of GPUs mining aleo and I had it running on the shitty pool all this time. Just saw a massive hasrate boost from your tutorial here. I thank you man, This is why I continue to subscribe to your channel, always relevant information! QUESTION: If you had 20000$ cash for more gear what would you buy? CPUs or GPUS? If so which ones and why? Thank you again man, cheers from new brunswick

[@RabidMining]

Nice that's a tough hard to say how the next cycle will be maybe save for a couple 5090s

[@andrewjones198]

@RabidMining maybe just pick up a bunch more CPU rigs... the super high end GPUs scare me. I'm on the maple syrup too and I might do something stupid and kill one. I have been picking up all the EVGA 3090s I can get lately. Now rocking a rig of 8 x3090!

[@RabidMining]

@andrewjones198 nice

[@donovanjordan2613]

I couldn’t make MMPOS work with F2pool but I was able to make it work with this pool so while you didn’t cover MMPOS this helped me get my 3090’s mining. My 4090’s were already working in Windows. Thanks!

[@holdouts]

Read the FAQ if you are using HIVEOS and are getting a glibc library error. You need to either upgrade to latest version of HIVEOS or they have the command to update your C libraries (the route I chose). The miner uses a little more power than F2pool miner but it seems more stable and my load average is much lower as well. The dashboard is much better.

[@robsonpereira3086]

Didn't work for me, trying move to beta version and see if will work.

[@LADGKC]

I noticed a 15-20% increase in power using ZK miner instead of F2pool miner

[@daniel_ahri]

Mine is uptodate and still getting the glibc errors. What to do?

[@rkwjunior2298]

I'm all updated. No go

[@pasha767]

​@robsonpereira3086 hivereplace --list n go for the 1st stable image. It will fif the issue. Just fixed mine

[@usiffputz6753]

RABID I installed ALEO prover in shell HiveOS an just ran command line. Screw the browser

[@usiffputz6753]

I tested both pools with 4090s they are actually equal in payouts

[@Pepaw-Bill]

I’m glad another smart guy has password problems.

[@RabidMining]

Lol

[@DhruvClaire]

whenever I open wsl its shows this message "Failed to mount F:\, see dmesg for more details." I cant see F drive in my disk management.

[@RabidMining]

Not sure maybe something with the wsl install?

[@TradingAaddict]

I am getting error unable to link to pool..?

[@cynric-u4m]

Cheers, great video. Can we set our Wallet Address as an Exchange Deposit Address ?

[@RabidMining]

Not recomended but can try

[@ryanraider]

i got the miner working on my windows pc and all, but how do i stop it aside from turning my pc off? closing the tab doesn't work, it just keeps running in the background. I tried to end task "vmmem". but can't. access is denied.

[@RabidMining]

Have 2 instances running?

[@ryanraider]

@@RabidMining i mean, how do you stop the miner in windows? like in nbminer, lolminer, trex miner, when you want to stop the miner, say you want to play a game, you can just easily stop the miner just by closing the window. but in this linux thingy, when i try to close the miner it just keeps mining in the background. when i try to stop it in the task manager, i can't says access is denied. is there any ubuntu code i can type to stop it?

[@Pepaw-Bill]

Easy setup instructions, well done.

[@RabidMining]

Thx

[@That1Techyking]

Does it work with amd yet

[@RabidMining]

Not yet

[@LostJediJC]

are you able to view details in the terminal when running this miner or will we need to run that log file command?

[@RabidMining]

Can see them in the window if you run it the other way you gotta run the log command.

[@ich_16]

btw that icon before the rebranding , i used to see it every time i opened f2pool

[@ciastek639]

It returns : "custom exited (exitcode=0), waiting to cooldown a bit" Please help thank you

[@Pepaw-Bill]

Mine said same thing. Going to try f2pool and see if works.

[@Pepaw-Bill]

Didn’t work, same on both pools, Hive setting ?

[@mikejones3926]

Also having the same issue. I found a post saying this issue is due to a bad riser. I'll update if this is the issue.

[@daniellib32]

Got the same issue, can't figure it out

[@RabidMining]

@daniellib32 workers name or pool address?

[@marcosvega7145]

How many aleo coins do you have to have for the zk pool to make the payment??? thank you

[@RabidMining]

Min 3

[@marcosvega7145]

@@RabidMining ahh ok, because yesterday I started, and I have 4.32 aleo coin, but they haven't paid me yet.

[@user-bh9yk2wv4w]

@@marcosvega7145 I’m at 4.5 and no payout, no option for payouts

[@mateuscz8715]

​@@marcosvega7145How much did they pay with, friend?

[@aldosilva6]

​@@marcosvega7145have they already paid? I'm in the same situation

[@williamgilbert9477]

Do you have a video showing how to set up linux on a gpu miner (like octominer woth 8x 3090s)?

[@RabidMining]

Can watch the windows section I used wsl which is Linux in windows but not sure about setting the OC is pure Linux.

[@williamgilbert9477]

Thanks!!!

[@gepetto5203]

Hi..... 2 questions please : Is it possible to mine with gpu amd ? currently i mine on F2pool, is zk pool better ? thanks

[@RabidMining]

Don't think amd has support

[@gepetto5203]

@@RabidMiningok thanks. So I need to find a crypto to mine with my amd cards. Any idea of a profitable crypto? I used to mine nexellia but it doesn't earn much anymore.

[@yavecanela]

No amd support and both pools seem to preform the same.

[@yavecanela]

Anyone has a idea when a payout happens? I am registered and currently have 7 aleo. Nothing moving 😢

[@RabidMining]

Hmm thats weird should happen once a day if at 3

[@Dyers777]

@RabidMining Any way to solo mine Aleo ? I think I see a way on ZKPros, but wanted to ask first. Thanks !

[@RabidMining]

Not sure

[@Dyers777]

@@RabidMining I tried ZKPros, but missing something. I keep getting errors. I really want to try solo mining this though.

[@tonyhimself6910]

why this pool always crash.. I use 3060 and it doesn't update frequently how much I earned.

[@RabidMining]

Should update every few min

[@AbhinavSharma-w8j]

I got this error "Failed to get count of cuda capable device. Exception:CUDA driver version is insufficient for CUDA runtime version" when I run " tail -f prover.log " command. How can i figure out this .

[@RabidMining]

What driver are you on probably gotta update it.

[@blekibabic]

Hej rabid nice video m8 i wonna try out this coin to mine but i am using RaveOs linux and in section where OCsetting are placed i do not have option like you on hive to enter the mem clock lock only mem offset. As i recon this new coin and miner do not require the additionac miner config to be placed in miner its self. Was there nvidia command tool or something to add oc settings i forgot about?

[@RabidMining]

Not sure about raveos maybe the nvtool command works.

[@Strangerwithoutaname]

Failed to find proof target. Exception:an illegal memory access was encountered For all of my rigs. Already tried several hiveos images. But anyway. Thanks for the Video.

[@RabidMining]

Dam what gpus? Maybe there is a new miner released and hive beta.

[@Strangerwithoutaname]

@@RabidMining Already tried beta. CMP 170HX (10GB). Strange..

[@Strangerwithoutaname]

@@RabidMining Found the solution "hpkg purge". All installed miners will be deleted then.

[@usiffputz6753]

Rabid you missed in Extra Config to put your worker name there!

[@RabidMining]

Worker name still shows up without the extra config

[@tactics2722]

Thanks man I put a little hash on tonight's 😂🎉

[@mscottveach]

My leo wallet seems to think 1 aleo is worth $1 dollar...anyone else have that problem?

[@RabidMining]

Ya same

[@tancakar8987]

its just a problem at leo wallet

[@gepetto5203]

Why do you get such different results on your 3060ti with the same OverClocking? 168 kh, 768 kh, 381 kh, 659 kh. I don't understand. thanks.

[@RabidMining]

Think it ended up being hiveos with lots of cards is reporting the wrong hash like a 3090 hash is on a 3060ti

[@gepetto5203]

@@RabidMining ah ok thanks. On my hiveos there is no hash displayed per card, just the general hash at the top of the page.

[@RabidMining]

@gepetto5203 try to update hive to the latest beta image. Think I did that in this video.

[@LADGKC]

The hashrates table is REVERSED, meaning your first card is on the bottom. IDK why

[@scottmarto5199]

I am having an issue where one card out of 8 has a lower hash rate (bit over 10%), It seems to be related to the PCIe port not the actual card because it stays on that port if I swap cards around. Not sure if a Hive issue or hardware. I am new to Hive though...

[@Roypantera]

Tried all 3 pools Asia1 HK and JP and says unable to connect ? anyone?

[@RabidMining]

Not sure then :(

[@kanav662]

Where them 3070ti at?

[@dane2427]

Is anyone getting a stable hashrate ? my 3090s fluctuate by 50% im using xelis overclocks because the Aleo recommended ones crash my rig. i get between 350 to 700 kh sometimes up to 900.

[@RabidMining]

That's normal need 24h average to see your hash.

[@dane2427]

@@RabidMining ok thanks

[@m5chk1]

is fox wallet any good? i have it installed as browser extension

[@RabidMining]

No idea lol

[@m5chk1]

@@RabidMining do i get payouts once a day on zk work pool? is there minimum payout amount? don't see it on their site and you said we have to register to get payouts - how does it work? can you clarify that?

[@Mooria]

Is the payout better?

[@RabidMining]

Better dashboard pay may be a bit better.

[@rogerm.4090]

Is there a max gpu limit per rig with this miner? Anytime i try to have more than 2 i get errors.

[@RabidMining]

I got 12 gpus in one rig that works fine.

[@Roypantera]

boths rigs for me only allows me to use the 1 GPU display is using

[@rogerm.4090]

I can't figure it out. Back to only 2 cards. Might build another rig

[@firedrapeon6012]

I can't get a 12 NVIDIA GPU rig in windows 10 to work, keep getting "insufficient memory" errors. Ended up switching to hiveos and it works now. No idea why there were problems with the windows miner, when it works perfectly fine with all the other miners and coins.

[@RabidMining]

@firedrapeon6012 hmm not sure

[@CryptoCurt]

i am getting glibc error. I am on the latest hiveos version and i tried to update the library but getting error about apt secure or something. F2pool miner working though.

[@RabidMining]

Try hive beta

[@rulbert6245]

Easy fix, You need to run the following command in hive shell to update kernals - Run the command hive-replace - y -s

[@NK98_]

Is there already a windows miner for this coin?

[@RabidMining]

Not sure haven't looked into automation

[@NK98_]

@@RabidMining Is there already a windows miner for this coin?

[@RabidMining]

@NK98_ not sure haven't looked wsl has been fine for me some people said there was.

[@mehmetakcakaya5120]

I cant connect with pool.the message is "unable to link to pool"

[@RabidMining]

Try a different pool address whatone are you using?

[@mehmetakcakaya5120]

@@RabidMining I am using hiveos latest beta version. I tried f2pool and zkwork same situation occored

[@RonyRollin]

thanks for a fantastic video my friend

[@RabidMining]

Glad you enjoyed it

[@ryanraider]

Took me a while to find out why my hive os miner keeps restarting after couple of seconds/minutes. turned out it's normal xD

[@guillermowerber2412]

It returns : "custom exited (exitcode=0), waiting to cooldown a bit"

[@ciastek639]

hello how did it manage to start

[@ciastek639]

'Cause I've got the same spike

[@willianshi]

nv version too high

[@dffd9369]

How min payout in zk work ?

[@RabidMining]

3

[@Xedio92]

some different addres for europe?

[@RabidMining]

No just these

[@user-bh9yk2wv4w]

How do you get a payout?

[@RabidMining]

Once you get 3 coins it will pay once a day

[@lordwolve]

where is that pool page to monitor??

[@RabidMining]

Dashboard link at zk.work

[@lordwolve]

@RabidMining it's not actually there!.. I spent like 2 hours trying to figure it out!

[@lordwolve]

@RabidMining even registered. All I can get by entering the address is a total $ amount with a registered account.. cannot see that page your getting

[@RabidMining]

@lordwolve that's weird what all are you seeing?

[@RabidMining]

@lordwolve click back on the main page and enter your address in at the top

[@dennyrobles1418]

Has anybody got paid? What is the minimum payout?

[@RabidMining]

Min of 3 once a day

[@firedrapeon6012]

I haven't received a payout and I'm at 4.66 Aleo and I'm even registered and added the wallet address to the dashboard. Sent an email to support just now and am waiting for an answer. My wallet address is an exchange though.

[@RabidMining]

@firedrapeon6012 how long have you been at it? Payout should be in about 8 hours from now

[@firedrapeon6012]

@@RabidMining hi Rabid, it's been 2+ days now, since I first started. I'm not sure if I had 3+ Aleo 17 hours ago. I'll report back in 7+ hours from now or if I hear back from support.

[@RabidMining]

@firedrapeon6012 sounds good

[@TheSince1881]

ZK in Min. Aleo ödeme miktarı 100 Aleo mu?

[@RabidMining]

3 min

[@dthor6922]

is aleo a legit project?

[@RabidMining]

Yes for now anyway

[@Bobmarleyoo]

Bro, how to fix in hive OS "GLIBC_2.29" not found "GLIBC_2.28" not found....

[@RabidMining]

Try hiveos BETA

[@Bobmarleyoo]

@@RabidMining stable version 227....@240530 has arrived

[@LADGKC]

1- update the gpu drivers 2- most importantly update the hiveos image with this command (hive-replace --list) then type (1) then (yes).

[@sourabhchoubey3303]

there is actually a aleo miner for windows

[@RabidMining]

Oh it's released now?

[@mscottveach]

@@RabidMining i got if off a google drive; a red panda video showed how to do it

[@absolute_gamer1637]

Last!

[@SanjayKumar-zc1wu]

Just a promotion👍

[@RabidMining]

Just a how to mine

[@CryptoMB1122]

USA people where are you liquidating you coins???

[@RabidMining]

Not waiting on the bitmain pump but mexc has it and gate.io in the description

[@CryptoMB1122]

@RabidMining thanks for the reply, but both of those are restricted for us in the states.

[@RabidMining]

@CryptoMB1122 dam that sucks

[@alvydasjokubauskas2587]

Nothing to see here. Gpu mining is dead long time ago. Just buy aleo.

[@Parzival-lw8mu]

🤢🤢🤢🤢

[@beboH4o]

This pool is shet crash non stop

[@SaeedUllah-lu4tn]

So do you think F2Pool is better than this, I am just asking because I started with F2Pool already and that is working fine.

[@beboH4o]

@@SaeedUllah-lu4tn i returned to f2pool, no crash there

[@RabidMining]

Haven't had a issue with it

[@blackmennewstyle]

What? KYC for mining? Oh come on lol Not even watching the video, i'm OUT 😓 This also looks heavily centralized in design if you ask me, almost looks like early DYNEX and its centralized mallob lol OK, i'm OUT for real this time lol

[@RabidMining]

Where's the KYC? Is non for mainnet

[@Shevanovich]

f2pool holding the payment of the miners