CENTERLESS GRINDING WHEEL BALANCING | BHAGWANSONS CENTERLESS GRINDERS

Discover the art of precision with Centerless Grinding Wheel Balancing by Bhagwansons Centerless Grinders. Achieve optimal performance and quality with our advanced balancing techniques.
For more information, visit www.bhagwansons.com/ and explore how Bhagwansons is redefining the standards of centerless grinding technology.

[@jaskirat6]

I love simplicity.You guys are doing awsome work ...

[@Bhagwansons]

Thank-you for your response.

[@user-oy4ls3yn1c]

Oche vamos do começo dez de quando tira o rebolo velho da retifica ok

[@matthewcornelius5862]

Quick question: after I static balance my new wheel i see that the wheel is not running true on the wheel arbor, but it is balanced perfectly. Do I install the wheel this way then dress the wheel round and pull off the machine to re balance?

[@rhodesia1578]

Hi there .. yes you pre balance then fit the wheel hub assembly to the machine then dress till it is running perfectly true on its grinding face . Remove the hub assembly with the new wheel and rebalance as per the first balance . All wheel hub assembly’s must have periodic balancing throughout its lifespan . This will be determined while your are grinding you should detect it been out of balance by it’s performance as it’s grinding on the surface of what you are machining . Hope this helps .

[@om-pk1bv]

Centreless grinding work place above the line joining the two wheel centres... as above

[@Bhagwansons]

Thankyou Sir for your response :) Visit www.bhagwansons.com

[@grahamsengineering.2532]

Excellent Video Guys. Always nice to learn something new, something old.

[@Bhagwansons]

Thank-you ,Graham O'Keeffe for your response . Visit www.bhagwansons.com for more :)

[@jacitak]

3m grinding wheel install

[@evandronewsted]

Is there some standard for this?

[@Bhagwansons]

Thanks +Evandro Wilson Rodrigues for your query . Kindly visit www.bhagwansons.com for more information :)

[@stupid-handle]

Hi, Would you be kind enough to explain how is it the weights get fixed on the flange just by tightening the bolt? I've been struggling with this video since I first watched it a month ago or so, as I would like to do the same for my bench grinder, and even for my minilathe's spindle. Have seen similar systems out there throughout this time. One of the systems is almost the same, but the flange is a dovetail, and the weights actually made of two pieces with a thread rigth in the middle of them. When placed inside the dovetail and the bolt is threaded on, it pushes and locks them against the dovetail. Another system has a hole on the flange to allow for a nut to enter on it, to wich a bolt can be threaded in the desired place (but where the hole is). So if you could shred some ligth on this, I'd really appreciate. Thanks,

[@Bhagwansons]

Hello Eduardo Costa , the weights are single one piece they are not made of 2 pieces . There is a thread in middle of the weight to tighten the screw and perpendicular to the thread there is a bore (in middle of the the thread upwards) in which ball equivalent to the size of the bore is there which moves up and down by tightening or loosening the screw respectively , which helps in getting the weights fixed or removed . Hope it helped :)

[@stupid-handle]

Hi, sure! Now that you mentioned it, I can notice it on the video. Thanks so much for taking the time to answer, I really appreciate it. All the best for you guys,

[@mykovrivera3716]

@@Bhagwansons is this kind of grinding wheel if it is already balanced is to be mounted in a machine that doesn't have a mechanism for balancing the wheel, right?will 3 pieces of weights can balance the wheel will appreciated if you answered it,thank you and more power to you.

[@Bhagwansons]

@@mykovrivera3716 Hello , Yes this grinding wheel is to be mounted on centerless grinding machine that doesn't have a mechanism for balancing the grinding wheel . 3 weights are optimal to balance the wheel . You may try with 4 weights . Also we would like to ask which country are you from ? Maybe we have our customer in that country to show you how it is balanced . Lasty not the least , please watch this video of how we mount and unmount the wheel for more clarity regarding mechanism kzbin.info/www/bejne/pH7MlWSem7abmK8

[@mykovrivera3716]

@@Bhagwansons I'm from the Philippines sir,and I do work for a Japanese company

[@namachivayamswaminathan5378]

What are the process parameter to control product quality.

[@Bhupindersingh-fq5sw]

I think size majoring with micrometer depending on the given tolerance and surface finishing RA value given in workpiece opretion standard🙂

[@user-lp6dn7os4j]

Good work guys 🥰

[@Bhagwansons]

Thanks!

[@jhareng]

At last good to see someone correctly balacing a grinding wheel. Used to do them over 3ft dia

[@Bhagwansons]

Thank-you Jonny for your response :) Appreciate it .

[@kaiok1777]

What does the arrow on the stone mean?

[@Bhagwansons]

Hello kaiok1777 thanks for your response , Arrow is used for mounting purpose . Please visit these links for more clarification regarding arrow . 1. www.highspeedtraining.co.uk/hub/grinding-wheel-marking-system/ 2. www.nortonabrasives.com/en-us/resources/expertise/mount-up-mount-down-arrows

[@mykovrivera3716]

@@Bhagwansons oh about the arrow on the wheel, will it be OK for you if I place on which side I want to,it doesn't have any significance,right

[@Bhagwansons]

@@mykovrivera3716 Yes . Rest you can try doing like it .

[@joeybarcelon-nr5zt]

❤❤

[@soychivaspues6375]

What's the A60??

[@Bhagwansons]

Hi we use cumi wheels, its the specification of wheel. You can check their website www.cumi-murugappa.com/

[@harishharsha8408]

How to set vibration setting

[@rabbannikhan3181]

i want this mashing plz tall me prise

[@Bhagwansons]

Hello , Rabbanni Khan Please email us for the cost of the unit . Thanks . www.bhagwansons.com/

[@pratikhinge8378]

Sir can we apply same procedure for balancing cylindrical Center grinding wheel?

[@Bhagwansons]

Yes Sir of course .

[@pratikhinge8378]

@@Bhagwansons thanks

[@dr.manritchannel9598]

Good job

[@Bhagwansons]

Thank you for your response. For more info visit us at www.bhagwansons.co.in

[@mahocnc]

Your'e the first one on youtube doing the right way... OK...here are some tips, to speed up the process a little you can stop the wheel by hand a little from rocking too much, when done rocking, mark exactly the top opposite side, [lighter side] where you mount a weight and never be moved again, the two other weights mount always the same distance from the permanent weight until balanced. Go dresse it and balance again on a new wheel....DANGER...a new wheel can be badly out of balance, if not balanced, a good idea is to just hit the on and off button and dress..not to go full speed until wheel dresses round. I wouldn't advise to dress without being balanced first on very large wheels.

[@Bhagwansons]

Hello , Konely King . Thank-you for your response , we'll surely try it and get back to you . Please visit www.bhagwansons.com/ for more information .

[@mykovrivera3716]

Konely King hello sir,would it be possible if you just first don't place yet the weights and let the wheel sway/rock by itself to determined which side is the heaviest. then that's the time to place the weights opposite to that area/side of which is heavy and make adjustments on those weights to minimize the swaying/rocking of the wheel

[@JAYSOM66]

Not balanced.. Wheel's rotation speed is also important. Wheel clock wise and anticlockwise speed is difference.. Not properly balance..

[@mosharif6743]

Is grinding ki price batao

[@Bhagwansons]

Dear sir , May be you have confirmed the price otherwise please contact one of our office representatives who will help you . www.bhagwansons.com .

[@vinumishra1992]

nic video

[@Bhagwansons]

Respected Sir +vinay mishra Thank you for your response for more in depth details visit www.bhagwansons.com :)

[@Pushyhog]

Why don't ya make em perfect out of the box?

[@Bhagwansons]

Hello, we are machine manufacturer. We use grinding wheels of cumi group :)

[@jaritikkanen3958]

I don't like balance anything like this top of bearing. If this axel running top of smooth steel bars there is much less friction. Now all bearing and ball inside perhaps twenty of them and four surface contact axel. It is much more contact surfaces than Axel lean only top of two bars. I also see good points of this method anyway :D

[@Bhagwansons]

Hello, Jari tikkanen thanks for your comment . Please visit www.bhagwansons.com/ for more information .

[@Bhagwansons]

Hello nanda kumar we manufacture centerless grinding machines only , so it would not be possible to upload cylindrical grinding wheel balance .

[@mykovrivera3716]

Jan Tikkanen in my experience of this kind of balancing grinding wheel such as this one,you need patience and the ability to minimize the swinging movement of the wheel by using counter weights

[@hcxqzs]

无心磨

[@pujasingh3402]

Gadasa grendar karne ka machine dikhaye

[@Bhagwansons]

Thanks @Puja Singh for your response .Kindly visit www.bhagwansons.com for more information :)

[@johnnybenson2169]

why centerless?

[@Bhagwansons]

Johnny Benson Thank-you for you query . Centerless grinder is a grinder for production of cylindrical work in which centers are replaced by a work-supporting member and two abrasive wheels one of which grinds work while the other regulates the speed of its rotation . It is cheaper than "on center" grinding and much faster.

[@Bhagwansons]

Thanks ***** for your response .Kindly visit www.bhagwansons.com for more information :)

[@jeetupal5874]

Sar please ak halp

[@Bhagwansons]

Please visit our website for more details bhagwansons.co.in/

[@nizamiabdulkadir]

My masheen are toomuch vibrashan sar

[@Bhagwansons]

Please contact us on our email or call us. Thanks .

[@jianluidsmith6364]

So i need to improve myself

[@Bhagwansons]

Thanks Jian Luid Smith for your response , please visit www.bhagwansons.com/ for more information .

[@mykovrivera3716]

only once will I dress the wheel before mounting it to the machine, got it .but what will you suggest if in case I have to change the wheel because it is already small but I don't have to removed the weights on the flange.would you allowed that?thanks

[@Bhupindersingh-fq5sw]

@@mykovrivera3716 I think not need to remove the weight but some adjustment is need to be

[@sona-gadhave6125]

Balancing ok hogi to vabration bhi nahi hota

[@KoreanFarM-bj9cx]

나도 해봤습니다 .

[@Bhagwansons]

감사합니다. 자세한 내용은 www.bhagwansons.com/을 방문하십시오.

[@anquinadams8102]

too much noise in the background cant hear the guy speak

[@Bhagwansons]

Thanks anquin Adams to hear that . We will upload a new video soon on youtube which will explain how to do centerless grinding wheel balance .

[@Bhupindersingh-fq5sw]

@@Bhagwansons awaaz to tan bai Punjabi lagde😁

[@zigmass4899]

Auto balancing: kzbin.info/www/bejne/jqrVZoiQgNesn9k

[@jeetupal5874]

C. G

[@jeetupal5874]

40 macron ki oblti h

[@Bhagwansons]

Please visit our website for more details bhagwansons.co.in/

[@KunalSingh-zs3gu]

I m opretar 8178835742

[@rajeevpanchal2670]

अरे भाई बेलेंस करते वक़्त अगर बोलते भी की ये सब कैसे होता है तो और अच्छा होता

[@Bhagwansons]

Thanks Rajeev panchal for your comment . Your comment helps us in improving our standard .

[@rajeevpanchal2670]

@@Bhagwansons bhai ye video dubara dalna or voice quality bhi acchi honi chye ok

[@elh3809]

how long you want to balance this, and who is gon pay for- the customer????? no, bulllshit on you. we have electronics now----wooooouuuuuw

[@Bhagwansons]

Thanks +hans-juergen rasch for your time .We also have electronic wheel balancing unit . Kindly visit www.bhagwansons.com for more information :)

[@canvasmar]

Bhagwansons Centerless grinders o

[@mahocnc]

That I think wouldn't be a concern for India...parts done for maybe a fraction compare to yours...but they can sell you one.

[@jaysilverheals4445]

too slow and not done right to begin with. The wheel should have been balanced in 1/4 the time or less.

[@Bhagwansons]

Thank-you JC Mills for the comment . This is an old method of balancing the grinding wheel , the video was made 5 years ago . At present , we have automated balancing system for grinding wheel . For more information visit bhagwansons.co.in/