Big 3D Printer for Big Projects Creality CR M4

[@3DPrintLab1]

So what do you think about these projects and CR-M4?

[@MrBaskins2010]

0.8mm nozzle and burning off strands with a lighter? this has been my workflow since 2019 as well, works like a charm. great video

[@3DPrintLab1]

Thank you so much 🙏Yes, lighting it with a lighter is very useful. A small blowtorch can also be used.

[@mertcanpolat1894]

Selamlar hocam, bende cr m4 aldım fakat baskılarda bir türlü istediğim kaliteyi yakalayamadım. 0.8 nozzle takılı cihazda. Creality slicer, creality cloud vs denedim fakat düzgün bir sonuç alamadım. Kullandığınız slicer ve profili paylaşabilir misiniz?

[@3DPrintLab1]

Merhaba, Creality Print kullanıyorum. Direkt cihaz profili olmadığı için CR 10 SE modelini seçip baskı alanını değiştirin. Buradaki ayarların bazıları M4 için fazla. O nedenle İvmelenmede tüm değerleri 700mm/sn2, Jerk(XY) değerlerinin de hepsini 8mm/sn yapın. Baskılarda duvarları 50-75 arası tutun ve dolgularda maksimum 120mm/sn olarak ayarlayın. 0.8mm nozül kullanacaksanız nozül ayarını da değiştirmeyi unutmayın. Bunların haricinde standart profilde başka bir değişiklik yapmadım.

[@abshb]

I’m the first viewer and first comment 👍, this is an excellent video

[@abshb]

Small note: use timestamps

[@LarryBerg]

I second that lol

[@3DPrintLab1]

@@abshb I will take your suggestion into consideration

[@3DPrintLab1]

@@abshb Thank you very much 🙏

[@3dpathfinder]

Ther is the Elegoo Neptune 4 Max at 420x420x480 running Klipper with higher print speeds . I have both the Neptune 4 Plus and Max. Also you have the Comgrow T500 with a 500x500x500mm build volume.

[@3DPrintLab1]

Thank you for sharing your knowledge. I think it is a disadvantage that Neptune 4 Max performs XY axis movements on wheels. Has this been a problem for you? I just learned about Comogrow T500. This printer looks nice. It's nice that they use linear rails on all axes. Also running on klipper.

[@dilligafTV1]

The Neptune 4 max has been the most frustrating printer I have had the displeasure of using. And, i own3 other printers.

[@3DPrintLab1]

@@dilligafTV1 Thank you for sharing your experience. I am asking for information, what were the features that did not please you?

[@dilligafTV1]

@@3DPrintLab1 well. I’m pretty sure I got a dud. I actually liked the features it had. After I set it up, it would not print at all without a firmware update. It would just beep when it got to the front of the print bed and stop before it did its test line. Then, it did print out the little boat so I thought all was well. So I sent a large print of Wolverine mask to it. No matter where I put that model in the slicer on the build late, the printer would grind the belt when it would move the bed forward and squirt filament off the back of the plate. I tried two different slicers.i gave up and packed it up and sent it back to Amazon. I’m thinking of giving the big anycubic a try. I want something to he able to print that volume.

[@3DPrintLab1]

@@dilligafTV1 Thanks for sharing your experience. I wanted to know about this since it is a similar printer and many people ask about the Neptune 4 Plus and Max.

[@HystriaChannel.]

Creality Ender3 V3 KE 3D Printer Review videosu ile kıyaslama yapıyorum da ağız hareketleri bunda inanılmaz belli oluyor ve aşırı bir yapaylık katıyor 2 video arasında farklı bi program mı kullandınız yoksa kamera açısından dolayı mı ai pek becerememiş ?

[@3DPrintLab1]

Aslında aynı programı kullandım. Tabi sürekli üzerinde yeni çalışmalar ve güncellemeler yapılıyor malum her güncelleme iyi sonuç vermeyebiliyor. Siz söyleyince ben de iki video arasındaki farka baktım ama fikirlerimiz ayrı. KE videosunda ağızı çok açarak konuşturduğunu düşünüyorum :D Sanki onu biraz azaltmışlar gibi. Şimdilik bu konuda en iyisi Heygen ama ai hızla gelişiyor yakın zamanda daha iyi çözümlerde çıkabilir.

[@Mingnoicup]

can you share print profile ?

[@3DPrintLab1]

You can use it by selecting CR-10 SE from Creality Print and changing the bed dimensions. I recommend that you do not exceed 80-90mm/sec in print speed. Acceleration values ​​should also be 700mm/sec2. I use all other settings as standard.

[@TheWeepingCorpse]

Are you related to General Zod?

[@3DPrintLab1]

Yes, we are relatives. We haven't seen each other for a long time. It's a family matter. 😏

[@ВлСк]

Толково

[@3DPrintLab1]

Спасибо 🙏

[@soyyoelcristian]

Hello @3DPrintLab1 , thank you for the video, I bought the printer but I can't find a good profile to get good prints. You help me.

[@3DPrintLab1]

You can use it by selecting CR-10 SE from Creality Print and changing the bed dimensions. I recommend that you do not exceed 80-90mm/sec in print speed. Acceleration values ​​should also be 700mm/sec2. I use all other settings as standard.