Big block s10 headers

[@patrickbenjamin6010]

Love the s 10 can u email me I want to do the same thing [e-mail] thank you

[@backyardbuilttrucks1]

Yes I can

[@backyardbuilttrucks1]

Just went back thru to find you email . Sorry.

[@patrickbenjamin6010]

Backyard-Built-Trucks it’s ok

[@renwickconolly2839]

Excellent video bro! One of the most informative videos I have ever seen. thank you for taking the time and making the effort!

[@backyardbuilttrucks1]

Ok best way to ask me any questions is to email me @ [e-mail] , I will be posting a video this week showing all the part numbers for the headers , steering shaft , control arms and so on. thanks so much .

[@chrislangley4724]

I'm thinking about doing this in a 91 blazer, your video might have made my mind up on pulling the trigger

[@ronaldlewis4032]

Great job and great information I bet the s10 is very fast 496 cool build✔What are the cylinder heads??

[@backyardbuilttrucks1]

Head on this engine are 820 castings

[@daniel-kk4tf]

What type of headers are they for what years on both sides ?

[@andylewis2541]

Do you have the part number for the passenger side?

[@backyardbuilttrucks1]

manual if on street , use a high flow . electric is good at track cause you can let it run between races

[@jslawncare5627]

wats ur opition on water pumps electric or manual

[@misterjones9522]

Good video. Thank you

[@joshuafarve7000]

What year model jeep steering shaft do you need

[@markusgentry1548]

i am doin same on a 92 s10 with a 468bbc , ima try and use fender well headers for a 57 chevy as i will not be runn wheel tubs , i think theyll fit wats ur opinion

[@joahuafarve3613]

For the control arms do I go with both right or both left or a right In a left

[@backyardbuilttrucks1]

Joahua Farve use 2 left side arms , flip one over for right side .

[@Anarchy-Is-Liberty]

Nice double jointed finger there!! ha ha ha OK, but where do we find these headers? I mean, who is selling them, and what are these called? You said we need to buy two sets, I'm assuming one set is for some other vehicle, and the other set a different vehicle? Just "buy headers off of eBay" isn't helping me. Thanks. Thanks for this video, there is some good info in here!

[@georgenunes5870]

I love your video Could you Please give me the part number to the Drivers side Header

[@backyardbuilttrucks1]

racing innovations , Olathe ks. is where I got my headers from

[@michaelguinn3613]

Can you give me the part number for the driver side header

[@tracypettibon270]

Do you have enough room in the frame to run stock manifolds

[@backyardbuilttrucks1]

Tracy Pettibon Yes chevelle manifolds work best

[@dextermonk8476]

Would there still be clearance issues with steering shaft

[@Myvintageiron7512]

This is the only video that actually has good information all of the other S10 454 vids are just guys starting and reving the engine who gives a shit the 454 sounds the same in in a full size truck as in and S-10 those videos are worthless yours is really good I'm getting ready to do a 427 S-10 swap I think I'm just gona go with fender well headers

[@backyardbuilttrucks1]

Myvintageiron7512 thank you, i wanted to show it can be done without hacking up the truck to fit engine in the truck. and on the cheaper side of things. i would recommend using a 1994 and up chassis as they had a narrower engine crossmember and boxed back to rear spring mounts. my truck has a 1998 chassis under it. i am building a new set of over the frame headers now for this truck as it is getting a blueprint engines 540 over the winter. my son is taking the 496 for his truck.

[@johnsims6784]

I have a 98 s10 blazer with all s10 4x4 supposition and and 10 inch lift and I'm about to put a 454 BBC in it oh ya I do have a 8 inch body lift also

[@highvoltagefab]

Can I get part #'s for both sides headers?

[@joshuafarve7000]

Okay sounds good

[@teal61762]

can a person use cast iron manifolds? what are they out of you know? Is it required to remove blower box completely?

[@backyardbuilttrucks1]

Chevelle manifolds works best and yes heater box needs removed or modified to clear cylinder head.

[@teal61762]

@@backyardbuilttrucks1 what year Chevelle works the best do you know? Are familiar with airbox door Holley offers is it enough for BBC even though designed for SBC

[@backyardbuilttrucks1]

@@teal61762 We have used 68 to 72 manifolds where driver exits in front of oil filter straight down and passenger exit and a angle back and down .

[@teal61762]

@@backyardbuilttrucks1 TY

[@dennisnbrown]

Might s well. These evaders so perform any better than stock manifolds

[@CamaroRick]

What size tubes are those headers

[@backyardbuilttrucks1]

Camaro Rick 1-7/8 primaries

[@kayliekeller5935]

What kind of steering did you use

[@backyardbuilttrucks1]

Kaylie Keller manual s10 box and a steering shaft from a jeep Cherokee with u-joints on each end 3/4 30 spline at gear box 1 inch double D at firewall

[@kayliekeller5935]

Ok

[@backyardbuilttrucks1]

Kaylie Keller here is steering shaft I use off amazon. APDTY 105841 Steering Column Lower Intermediate Shaft Assembly Complete With Both Universal U-Joints Fits 1984-1994 Jeep Cherokee w/Power Steering (Replaces Mopar 4713943)

[@backyardbuilttrucks1]

not forgot about calling you , just been busy

[@joshuafarve7000]

This video you have is a life saver bud thanks for all the help

[@joahuafarve3613]

Whats the part number on driver side buddy

[@backyardbuilttrucks1]

Joahua Farve part # 91031134-L

[@shawnrogers4082]

What would I search for to get the headers thank you

[@NBrogdon45]

Did you listen to the video? This is why uploaders hate to review and respond to comments bc of these type questions.

[@joahuafarve3613]

I got it thanks

[@davidcreel2937]

Hay can u help me with part numbers on headers please

[@galenyoung8349]

Box the frame or it will twist like a mf, bust out the windshield, & DESTROY the entire, truck. Inside & out, i promise.

[@backyardbuilttrucks1]

drivers side header set New Quantity10 available Almost gone BrandRacing Innovation and Supply WarrantyYes Manufacturer Part NumberRIS.10054 Item Number161945020324 CategoryExhaust Manifolds & Headers in eBay Motors

[@joshuafarve7000]

I'm trying to figure this out I just order on side of headers don't no what to get for the other if I dint answer leave a voice man thanks

[@trentspight3027]

Steering box,

[@jesserod1234]

Bb