A big brake kit option you may not know about for the G Body platform. Zo6 goodness
Пікірлер: 79
@My01863 жыл бұрын
Clean Clean setup.Kore3 always come thru with quality parts.
@blkmontecarlo3 жыл бұрын
Great information and upgrade
@tonyvillegas84003 жыл бұрын
Nice job on the brakes bro. I just recently started working on my monte ss. About to do a frame off, and also ordered the UMI kit you have. Can't wait till I'm this far into the project.
@snedenwerks3 жыл бұрын
Thank! That’s awesome. You will not be disappointed!
@tonyvillegas84003 жыл бұрын
@@snedenwerks quick question why did you go with the drop spindles? Wouldn't you get more adjustability with the non drop 2wd blazer spindles?
@snedenwerks3 жыл бұрын
@@tonyvillegas8400 to be honest, I didn’t look into it when I bought them. I had drop spindles before so I went with them again
@byronroper45273 жыл бұрын
@@snedenwerks what caliper bracket did u buy from kore3
@chadwynia5021 Жыл бұрын
Using just the stock blazer front brakes on mine with the stock knuckle. Almost 11 inch rotors and 2 piston calipers.
@MRHIM-cc7uh2 жыл бұрын
Nice job , the guys was wanting to know what bolt gos where????
@dannydiaz3645 Жыл бұрын
For the rotors and calipers what is the right year for the Z06
@FACEBOOKS-WBDS Жыл бұрын
I would be really courous to see data. I am thinking with the weight you added the spinning inertia increased to the point that you negated the upgrade. But Damn It looks good.
@blackrob44722 жыл бұрын
Love the work 🤟 I have a 78 and I have standard control arms will this exact setup work ?
@snedenwerks2 жыл бұрын
I would think so but don’t take my word for it.
@sincityrick87352 ай бұрын
what kind of wheels are they on the Malibu
@brannonhinkle34942 ай бұрын
Do you have part numbers or links?
@redneckswitwheels2 жыл бұрын
Ya know what i hate? When u finish ur brakes n realize.... i REALLY NEED THESE
@jjbowdenn78733 жыл бұрын
Is that kor3 bracket the same one for the c5 brakes
@snedenwerks3 жыл бұрын
I want to say yes but call them or check online to confirm
@patrickmacord8725 Жыл бұрын
Great video! Can you put a link for all the parts. Thanks
@snedenwerks Жыл бұрын
Sorry. No. This was a while ago. Don’t remember
@mr.iforgot30625 ай бұрын
Tire rub?
@Dfuqua2 жыл бұрын
What size bolts did you use for the hub. I can’t find the correct size.
@snedenwerks2 жыл бұрын
I honestly don’t remember at this point
@Dfuqua2 жыл бұрын
@@snedenwerks all good I figured that.
@dforest85393 жыл бұрын
It looks like you can loose those adapters now. Why do you need them? Too wide?
@snedenwerks3 жыл бұрын
Bolt pattern
@RicoGotMotion2 жыл бұрын
What color is that
@jorgemontoya14903 жыл бұрын
The bracket was it the hybrid one or regular do you have part number
@byronroper45273 жыл бұрын
Have you found the correct bracket
@jdiaz13742 жыл бұрын
We definitely need part numbers!!
@mattmosakowski39302 жыл бұрын
What wheels?
@Canadiancarguy19872 жыл бұрын
I just subbed to your channel I made you hit 1K LOL you are welcome! and Great Channel you got here man!
@snedenwerks2 жыл бұрын
Haha thanks man! Appreciate it!
@Canadiancarguy19872 жыл бұрын
@@snedenwerks np and Nice Malibu!
@deyonnebagby3961 Жыл бұрын
Is there anyway you can get me and itemized list of all part used if so thank you in advance
@snedenwerks Жыл бұрын
Nope, don’t have time for that. Google.
@Tracy.Archer Жыл бұрын
How much did you spend on this setup? I have a GN I want to do the same.
@snedenwerks Жыл бұрын
Sorry, don’t remember
@ChristianFonsecaOFFICIAL2 жыл бұрын
Where did you get the spindles from
@snedenwerks2 жыл бұрын
Got mine on eBay
@johnchalkias49362 жыл бұрын
Bro I have a 1986 Monte Carlo ss Can u give me the exact parts list of everything in this video???
@snedenwerks2 жыл бұрын
Sorry, don’t remember all the exact part numbers.
@cartracer64 Жыл бұрын
great looking malibu, is it on the road yet.
@snedenwerks Жыл бұрын
Nope, not yet. Hopefully this summer
@charleskolsch12022 жыл бұрын
What was the cost out the door for everything?
@snedenwerks2 жыл бұрын
Don’t know, I pieced it all together
@apacheone36432 жыл бұрын
Wheel adapters tend to break off the rear wheels on hard accelerates.I have seen it many times when the tires hook up with the ground and the car is 1000 hp plus. Be careful using them.
@bradleymorris88752 жыл бұрын
I see it with zero horsepower all the time too.
@intisity56492 жыл бұрын
will this set up fit a 18x8 rim ?
@snedenwerks2 жыл бұрын
Should but all depends on the wheels. I am running 18x10.5
@g-mansgarage90403 жыл бұрын
What do you want for the others I like to buy them
@snedenwerks3 жыл бұрын
Already gone
@Mr.Outside4real3 жыл бұрын
Can u give me the part # for those ARP studs....
@snedenwerks3 жыл бұрын
ARP 100-7708
@Mr.Outside4real3 жыл бұрын
@@snedenwerks thanks bro & do u have the part # for the rotors also??
@snedenwerks3 жыл бұрын
@@Mr.Outside4real ACDelco 22812086
@andrebrowne3193 жыл бұрын
I would like to get the website for the calipers place.
@snedenwerks3 жыл бұрын
www.kore3.com/
@andrebrowne3193 жыл бұрын
What year is the corvette are you getting this set up from?
@snedenwerks3 жыл бұрын
@@andrebrowne319 C6 gen
@BBradford18252 жыл бұрын
👍🏾
@unclestevensgarage4145 Жыл бұрын
What tire size and rim size are you running?
@snedenwerks Жыл бұрын
Don’t remember. Old video
@lc6310 Жыл бұрын
Update on Malibu?
@snedenwerks Жыл бұрын
Someday
@marshalljohnson8783 Жыл бұрын
What's the rotors part number?
@snedenwerks Жыл бұрын
Don’t remember
@VeNoM-vb9lo2 жыл бұрын
great video any chance you want to sell me your old brakes
@snedenwerks2 жыл бұрын
Long gone, but thanks!
@RicoGotMotion2 жыл бұрын
Wheel set up?
@snedenwerks2 жыл бұрын
Kansei 18 x 10.5 don’t remember the offset. Adapters needed for bolt pattern. Will not fit stock frame Gbodys
@darrinj79372 жыл бұрын
@@snedenwerks I've notched rear of my frame for 15x10s is any cutting necessary for the front? Also do you have a part number for rotors/are they C6 Z06 as well?
@blackrob44722 жыл бұрын
And what was rough total cost
@snedenwerks2 жыл бұрын
I honestly can’t guess. I pieced it together and prices probably changed since. Call up Kore3 and he can definitely help you out
@greyclassic65632 жыл бұрын
He spent a fortune... you can get s10 stuff from a junkyard for about $200.. pads and rotors 100
@snedenwerks2 жыл бұрын
… and then you have junk yard s10 brake. Not Zo6 brakes.
@reggieanderson8852 жыл бұрын
Great Lakes accent… Cleveland, Detroit, toledo, Buffalo