Don’t swap Blazer rear disc brakes on ya Gbody until you watch this. SMH 🤦🏾‍♂️

If you swap Blazer rear brakes to your GBody, you might need to do this.
I went to the Pick-n-Pull and got the rear disc brakes off a 2002 S10 Blazer. Installed on my 1986 LS1 Swapped Monte Carlo SS. If I can do it you can do it.
HOW MUCH DOES IT COST TO LS SWAP YOUR VEHICLE?
• 86 MONTE CARLOS SS: Ho...
KORE 3 BIG BRAKE UPGRADE!!!!! (LS SWAPPED GBODY)
• KORE 3 BIG BRAKE UPGRA...
Parts list: 1998-2005 Chevy S10 Blazer 2WD
1. Rear calipers w/abutment brackets (used from salvage yard)
2. Rear parking brake assy (used from salvage yard)
3. Rotors and Pads (New)
4. Rear coilover relocation bracket (only needed if running coilovers in the rear)
5. Longer wheel studs. (my car is 12mmx1.5 studs, I used ARP part 100-7708)
6. Custom rear brake lines. ( you will have to adapt the rear hard line to a pair of rear soft brake lines running to the calipers. PENDING, I HAVEN'T DONE THIS YET
7. Adapter the G-Body Parking cable to work with the Blazer parking lever. (I purchased new Blazer rear parking cables, Haven't installed yet. I will make a video when I get them to work)
BMR Suspension COIL OVER CONV WITHOUT CA
Part Number: 142-CCK461H
www.jegs.com/i...
ARP .509" Knurl Wheel Studs Most late GM (F-body, Vette)
Part Number: 070-100-7708
www.jegs.com/i...
Dynamic Friction Drilled/Slotted Brake Rotor [Silver], 1998-2005 GM
Part Number: 328-631-48035R
www.jegs.com/i...
Dynamic Friction Drilled/Slotted Brake Rotor [Silver], 1998-2005 GM
Part Number: 328-631-48035L
www.jegs.com/i...
R1 Concepts Optimum OE Brake Pads, 1997-2005 GM, Position: Rear
Part Number: 820-2551-0729-00
www.jegs.com/i...
Irish Marcelle Productions
Equipment used for production
iPhone 15 Pro Max (A Camera)
Rode Videomicro(shotgun mic)
Movo Edge RXD (wireless mic)
Movo wireless mini-up duo
iPad Pro 11inch
Blackmagic Cam (Camera App)
Lumafusion
Beats by: Crank Lucas

[@87SSBOI]

Awwww man…I’m tuned in👀👀👀

[@87SSBOI]

Great video man…we appreciate the heads up!! This is good to know before I get started on mine

[@cheekkeith74]

Leave the long bolts. Always better to have a few threads hanging out... especially when it what stops you. Good call. Good info for when I do mine... 😎👍

[@WarrenGBody]

Yeasir! Skip GTS Designs is my club brother. I believe I was there the day he recorded the vid. Peeps would ask how to do it and he said man imma make a real time vid from start to finish…He brought all the LS swaps, f body brake swaps and all that to the front. Before his vids, nothing was available. Clean ass work fammo!!🏆🤩🏆🤩🏆

[@adammcdowell8620]

I have put 98 up blazer rear discs on g-bodies, chevelles, various other 10 and 12 bolt vehicles. I normally have to space the caliper bracket out a little bit on a few I've had to machine .020-.030" off the caliper bracket to get it centered just right..

[@South_Georgia_Cargo]

I tell you this one time, changing that proportioning valve is one of the worst things I've ever experienced.😅 That is all.

[@PENNYLS1]

That part 👈🏾. Damn fasho

[@acollins9277]

MC is coming along well….👍🏾✊🏾

[@sherrodnelson3755]

😂😂😂 Milwaukee gloves and a green RYOBI impact. All good brother. Information will be used thanks.

[@PENNYLS1]

Brand Names huh

[@sherrodnelson3755]

😂😂😂 j/lk

[@perrystaggs4726]

Hello sir I just subscribed to your channel. I'm also doing a blazer disc break conversion on my mc ss and Im wondering where did you get the dust shield with the caliper bracket attached to it. I really can use your help

[@PENNYLS1]

I got them from my local pick n pull

[@lucky-Tx7]

Man LS! It's coming along really good!

[@drprick7432]

Very educational. Thanks!

[@Mr73cheyenne]

Very good and detailed information 👌🏾. I def sub'd

[@Powered_by_Genetics]

I'm glad I watched this. For my 87' Buick Regal-T, do I need to Buy/Install a Proportioning Valve for this Rear Disc Brake Upgrade? ✊🏽💯🤔👀

[@PENNYLS1]

Yes, you will definitely need a disc to disc prop valve.

[@JF-sv7qo]

Part numbers on what you did not get at junk yard

[@PENNYLS1]

Links are in the video description

[@coreyglen1992]

What's the part# to the soft break caliper lines

[@PENNYLS1]

I ended up using these. You can them in different lengths. Check out this page from Summit Racing www.summitracing.com/parts/rus-657330

[@willierebuildz9182]

Nice work 👍🏿👌🏿

[@coreyglen1992]

Where did you place the washers behind the dust cover between the bracket or behind the bracket housing

[@PENNYLS1]

@@coreyglen1992 between the rear end flange and the brake backing plate (not the dust shield)

[@coreyglen1992]

​@@PENNYLS1thanks

[@coreyglen1992]

Thanks bro.... you're super helpful and you make it simple 😅

[@coreyglen1992]

Keep doing what you're doing 💪🏾💯🙌🏾👍🏾🤜🏾🤛🏾✊🏾

[@marcosponce4422]

Are these the camaro backing plates?

[@PENNYLS1]

Blazer

[@Bball128]

Bro do you think that some c6 z06 4 pistons calipers would fit on these brackets

[@PENNYLS1]

I’m not sure but I doubt it. I’m sure someone makes a bracket for that though

[@mr.404atl2]

Can you run stock montecarlo rims with the blazer swap?

[@PENNYLS1]

Yes The blazer brakes will clear the Monte Carlo 15” wheels.

[@joraybeast2460]

Where did you get the proportioning valve from?

[@PENNYLS1]

Amazon but you can get it from Summit Racing

[@joraybeast2460]

U got a part number for it

[@PENNYLS1]

@@joraybeast2460 labwork Performance Aluminum... www.amazon.com/dp/B0865SVHR4?ref=ppx_pop_mob_ap_share

[@kingkennotv1973]

Did you have to add spacers to give the caliper and rim clearance?

[@PENNYLS1]

No spacing was needed for wheel clearance.

[@kingkennotv1973]

@@PENNYLS1 bro what!!! My original rims are touching the calipers. I also seen another video where someone used a spacer plate.

[@kingkennotv1973]

@@PENNYLS1 what size are the rotors?

[@PENNYLS1]

@@kingkennotv1973 the front brakes cleared my stock 15inch wheels. I have 17inch wheels. Not sure why the rear is rubbing if the front cleared.

[@kingkennotv1973]

@@PENNYLS1 yeah it’s actually the front that’s rubbing. Idk why I tried to do 2x already. Idk but thanks though