BIG CAM 2014 CHEVROLET SILVERADO 4WD!!!!!! (Built by Streetcraft, LLC.)

FINALLY, THE TIME ALL OF YOU AND MYSELF HAVE BEEN WAITING FOR!
My big cam 2014 Chevrolet Silverado 5.3L 4WD!
I'm beyond ecstatic about having the truck back, and it was time to make some awesome content for you guys with this girl.
Mod list:
AFe Momentum GT Pro Dry S Cold Air Intake
Katech L86/LT1/LT4 Ported Throttle Body
GM L86 Intake Manifold
Katech Gen V LT AFM/DOD Delete Valley Cover
LandSpeed Development Custom Grind Camshaft
LS7 Lifters
Hardened Pushrods
LT5 Double Valvesrings
Titanium Retainers
Stainless Works Long Tube Headers (No Cats)
Corsa Sport Catback Exhaust
Coan Converter 3200 Stall Torque Converter
Elite Engineering Catch Can
Inez Hotrods 4" Front Lowering Kit (Upper & Lower Control Arms)
Belltech 6" Flip Kit
Belltech Street Performance Shocks
Caltracs Traction Bars
Cam and Stall installation performed by Streetcraft LLC.
Facebook:
/ streetcraftllc
Instagram: @streetcraftllc
David Griffin of GriffTuned, LLC. tuned the truck.
Instagram: @dgriffinzr1
Email: [e-mail]
LandSpeed Development spec'd the camshaft (Camshaft was ground by Bullet Racing)
Website: www.landspeedheads.com
Facebook: / landspeed-development-...
Instagram: @landspeedporting
SONG(S) USED:
Song: T-Mass & Enthic - Can You Feel It [NCS Release]
Music provided by NoCopyrightSounds.
Video Link: • T-Mass & Enthic - Can ...
....................
PLEASE LIKE AND SUBSCRIBE!
FOLLOW ME ON INSTAGRAM: / shaneman20
LIKE ME ON FACEBOOK:
/ shaneman20
REVIEW OF MY CORSA SPORT EXHAUST SYSTEM W/ BEFORE AND AFTER VIDEO:
• WAS THIS A BAD DECISIO...
MY COLD AIR INTAKE:
afepower.com/a...
MY THROTTLE BODY:
store.katecheng...
MY HEADERS:
stainlessworks....
MY EXHAUST SYSTEM:
www.summitraci...
MY CATCH CAN:
www.jdpmotorspo...
BE SURE TO CHECK OUT THE MODS & UPGRADES PLAYLIST FOR ALL THE STUFF DONE TO THE TRUCK:
• Installation Videos (H...
keywords:
2014 2015 2016 2017
2014+
Chevrolet (Chevy) Silverado
GMC Sierra
5.3L L83 EcoTec3 V8
Elite Engineering Catch Can
AFe Momentum GT Pro Dry S
Katech L86/LT1/LT4 Ported Throttle Body
L86 Intake Manifold Swap
Stainless Works Long tube Headers
Ceramic coating
Corsa Sport Cat-back Exhaust
AEM Wideband O2 UEGO with OBDii/OBD2
AutoMeter Triple pillar gauge pod
Streetcraft
Landspeed Development
David Griffin
GriffTuned
Texas Speed
Brian tooley racing
camshaft
stall converter
3200 stall
big cam

[@Billyjack-Two-Crows]

This may be the best sounding cammed 5.3 on KZbin. I have watched dozens of vids Cammed 5.3.

[@Mr.Reign910]

These are FACTS

[@nickgrayy]

Wish I new cam specs

[@fintansky9369]

No, not even close.

[@Billyjack-Two-Crows]

411 Hp, NA 5.3. I’m impressed!

[@bptsecond1512]

@22:33 thank me later ;)

[@TheGuyWhoDidUrM0M]

Come to south texas. . . every mexican and their mom has a cammed chevy truck down here lol

[@guero9093]

Ken Pachi us Mexicans always loved trucks and building them 🤷🏻‍♂️😂

[@josemata7252]

True😂😂

[@droppinggears1464]

You ain't lying

[@lafeyetteransom5689]

Ken Pachi lmfao

[@lafeyetteransom5689]

Now I’m about to have one

[@keithrutherford8785]

15:41 “That was haulin ass” For some reason the way he said it killed me

[@copelandthrasher7731]

Same🤣

[@hellbillyaustin6883]

It looks....and sounds like a beast!!. Nice truck, pity we dont see more of these on our roads(U.K), all of you in the states have the nice toys!!. All the best to ya all.

[@tennesseecurtiss5741]

But yall got Jaguar and Land Rover🤣, I'll still always be a Chevy/McLaren fan

[@chiefsartain7711]

15:18 - That sound is amazing.

[@you8eddy8tube]

2014s were the best body style Silverados.

[@hotrodtodd7609]

What did it cost?

[@thejackgraves13]

I got rid of my drone after I did my Cam install. I made a custom J pipe. I have long tubes and no cats as well

[@jeremiahmarmon3256]

Cool build man. First video iv watched of yours. Deff gunna keep watching. Keep em coming...🤙🤙🤙

[@blunts63]

The sound of love

[@nemesisfamily7109]

Dude well done!! Love it. Great vid!!

[@hrbestalkinme3690]

My god thats bad ass. Id shit if I randomly heard that start up and start that kick ass lopey idle in public.

[@gregballard4318]

Love my 2014 the new styles for 2019 just don’t look as good as previous gen

[@finoTheBuilder]

The 2014 kinda took it back to the early 90s front end just modernized

[@dallasdelano8235]

Rufino Cortes that’s why it’s good

[@guero9093]

2014-2015 are the best in my opinion 16+ just look weird with the new front ends

[@dallasdelano8235]

Guero909 yeah

[@ilovethenfl510]

I got a 14 as well but I don’t mind the 2018 Front grill

[@jeffmaskivich6676]

amazing truck sounds so beautiful i just got a 2014 z71 you have definitely gave me some good ideas for my new project

[@rkmorgan2052]

Leave some stall on your next launch a torque converter multiplies the engines torque for a short period but only when it can flash up to its stall point. If you left off idle in 4x4 you would pick up half a sec because of this. Just passing this info to you friend try it out and feel the difference

[@xandersmith9832]

So beastly Shane keep it up

[@xandersmith9832]

Making me want to build mine up now lol

[@allgasnobreakforlife3527]

Dam that truck sounds good 👌

[@brianflores6207]

I’m looking forward to Camming mine thanks for showing me how potent it will be once I do all the upgrades while having good MPGs lol idc about MPGs anymore. So far I just have exhaust and intake but I really want to do more!

[@BoRNShadow]

What kind of power do u make with an exhaust and intake. Be honest plz

[@fordeaterdg]

I bet you never peeked at Christmas presents when you were a kid either! Awesome truck bud!!!

[@nmotion.anautomotivechanne3729]

Damn son! U did a great job!

[@Britton_50]

Black Tip, and add a resonator to the Corsa it’ll help tremendously!

[@TheWolfMatt]

Agreed. A stock 6.2 resonator should work fine for the flow and clean up the chop.

[@HammerdownMotorsportsUSA]

Yeah buddy sounds awesome

[@angelcarbajal6745]

Trokiando Cuhh

[@hebertslife8641]

A supercharger would be a nice add to that cammed 5.3,,,,, love my 18 silverado z71

[@oldschool5431]

All in all how much was the build in general? Been looking do the same to my 16 Silverado

[@Antiquetractorsetc]

This is awesome. It sounds like a vintage muscle car

[@BadAssEngineering]

Please Update us on what happened to your fuel economy

[@shaneman20]

Meant to get to this sooner. I most definitely will, but I need to find a free week that I'm not doing a ton to give you guys a clear idea on mileage.

[@JoshRD]

How is the fuel economy?

[@braydenmoore2322]

A whole bunch of freedom happened

[@shaneman20]

@warriorpluto I think I did touch on this on a Q&A.

[@dannywright9675]

@@shaneman20 how much did it cost to get this done ? Parts and labor.

[@BadAssEngineering]

Dale Jr. seems pretty happy in retirement

[@distefanovincent]

holy amaze ballz!! that is perfect!!

[@joeclarke3557]

Congrats on the upgrade man!

[@sethc5924]

Dang that sounds good. I wish I could get my truck cammed

[@itsoundzgood]

Sounds like a fuckin straight piped Cummins at idle lmao

[@shaneman20]

I've been calling it diesel mode. Lol.

[@joshbaker2776]

Nice truck man, that truck does have a sweet sounding exhaust

[@murphtheirishmanmurphy7268]

Nicely done!

[@luvsthestarz66]

And it was a mustang dyno which tends to read lower then s dynojet!!!

[@JCnordic2983]

There's a gentlemen on you tube who has a red silverado short bed awd twin turbos that drags in mex. It's nasty.

[@sicboy83]

Sounds great

[@cesaranaya2187]

Black tips... really nice truck

[@thejues3919]

Which cam and supporting mods , cause I have a lm7 and want to see if I can get some mods similar to this

[@patpoitras1653]

How much did you drop on the cam and the tune $$$ I have a 2016 I'm Thinking about camming nothing big, just a little bit of attitude. If it was an older model i would do it myself but I'm old school and haven't really done much past the vortec. things have realy changed a LOT!!

[@eddiepetersen9807]

I am so glad that I found this channel. New sub

[@jacksmith3189]

Good information Thanks

[@bradvb23]

Sweet man!!! I want to build mine also. Sounds great!!

[@michaelperry7261]

Love this truck. Badass. I have a 96 4x4 Chevy Ima cam out.

[@TheWolfMatt]

Oh holy crap!!!! 😳

[@408Eddyy]

How come your (abs) sensor light doesn’t come up with no cats?

[@shaneman20]

They were shut off in the tune.

[@C6_Phil]

Great video, keep it up man

[@LarsonFishing]

All In, How much? Did you do AFM Delete?

[@kennethbrooks4755]

Sounds good any quarter mile times

[@shaneman20]

14.2 @ 96mph. That's the best it's had. Haven't been back to the track since. Working on some things to prep it for the track and hoping to start filming that.

[@kennethbrooks4755]

@@shaneman20 wow very impressive thinking about doing the same set up to my truck its a 2015 crew cab 2wd silverado

[@allenrodgers1908]

Not sure if it’s just the sound of the video or not but I think it needs a lot better muffler. Sounds kinda like Chewbacca at lower RPMs.

[@DAVIDISEPIC1111]

Allen Rodgers cammed out

[@Max-jh9ng]

Nice truck bra I just traded my 14 for a 18 Z71 whit just full bolt on k&n tune True dual exhaust super 10s no cats to the side in front of the tire I used to beat every truck out there hade a 3/5 drop can’t wait to mod the 18

[@fvare333]

Nice setup man, I’m trying to see what mine can make on the dyno and the drag strip, I just need to add the gears flex fuel system and the 4000 rpm stall

[@xslayerizedx]

That sounds awesome! How much did the upgrade cost ? I'm looking into getting mine done .

[@thejues3919]

I got a 04 that I want to do a similar cam

[@lafeyetteransom5689]

Wow! Fkn amazing!

[@chrismendez6332]

Question....so did they save the tune to that diablo trinity? Or the trinity is no use now? How does it all work still ? Or just for monitoring? Thanks!!

[@RICKYNGA07]

I’d like to know as well

[@shanekoshie7381]

Yoo my name is Shane, i have a Silverado and i have that same exact 1320 shirt lol

[@Table1000]

Leave the muffler and add a reasonator to take out noise and drone., look on summit, vibrant has some super quite non restrictive reasonators that give more bass tone and take out drone.

[@FlyguyXII]

Question for you on your launch. I'm used to Dodge trucks and I know they tend to launch better from a stab of the pedal rather than stalling it up on the converter as the torque management tends to pull timing when doing that. Something to play with at the track and see if your 60ft gets better by stabbing it or by stalling it up on the converter. Do you have a way to log the timing with your diablo? It would be interesting to see what its doing on a launch.

[@shaneman20]

You, sir, are on to something. I'll have to do that next time.

[@DeaganZ3488]

Its a damn boat!

[@shaneman20]

My next video will have a Q&A. So, if you have any questions you'd like to ask (whether it's about the truck, the STi, myself, etc.), please leave questions under this comment!

[@SCWagner]

Shaneman20 what exhaust you running?

[@OMRS1]

Pricing I would like to know

[@OMRS1]

And u should make a acceleration video

[@joedavidjarvis7617]

Pricing for having that done

[@FlyguyXII]

Tuned for E85 or pump gas?

[@jasondayberry9906]

Did the shop have to notch the piston bigger cam?

[@shaneman20]

Honestly, I'm not sure. I'm gonna say no.

[@Mr.Beastforpresident]

How much was just the cam and installation?

[@gonzo956]

Badass 😎

[@toddmonterio8139]

I have the same truck but 6.2. Your getting 20 mpg! I'm getting 13 to 15 stock I've gotta make the change. What kind of exhaust s re going to put on? I don't know if I can take that exhaust noise all the time.

[@390nm]

what kinda gains did u see from swapping over the intake manifold/throttle body from the Gen5 6.2 onto ur L83

[@user-mk4se3nu5z]

If I got a decent cam. Looking 450 crank. And some 4.10 gears would I be ok with the 6 speed . 2014 5.3 more or less 360ish whp. Wanna keep decent stock drivability

[@JTrump23]

Are you still posting videos ? Where do you go?

[@jnavarro3059]

Hey boss really interested in doing this for my truck but not trying to be out of line but about how much was everything so I can have an idea about how much. Thanks bro if u dont want to say the cost I understand had to ask

[@shaneman20]

I'll try to get a full total of everything I've done in my next video. Might be a minute. This week got really busy for whatever reason.

[@matt6951]

I like it man. Not hating, I think it's cool. But that's less than stock coyote f150 with a tune and basic bolt ons numbers. The torque curve is beautiful, and that chop from the cam is something a coyote would be hard pressed to beat. You need to find someone with an 18 f150 and run them! I have an 18 5.0, I'm doing stainless works headers, custom exhaust, an intake and tune.. hoping it makes 430+

[@shaneman20]

Well, I do know someone with an EcoBoost... 🤔🤔🤔

[@TheGuyWhoDidUrM0M]

and e85 dont forget the e85 lol

[@Majinfirehawk]

Says the guy needing 4 cams to do what 1 cam does

[@arcamediuas]

Like what you have done to that truck, when are you re-gearing it, and what kind of ratio were you looking at(4:10)? :D Don't tell me you haven't thought about it. A transmission cooler might be worth considering.

[@shaneman20]

Thinking either 3.73 or 4.10/4.11 I'll probably end up doing the thermostat delete to the trans cooler lines. May look into the auxiliary lines and cooler as well.

[@arcamediuas]

@@shaneman20 awesome man look forward to seeing a dyno after all is said and done! I might go a little deeper from a 4.10 myself, my truck is lifted and the rims are heavy as ****, but im looking at upgrading to a 95mm TB, camming, and gutting all that crap on the exhaust. Hopefully have similar results to you!

[@blairbenedict1855]

Hey bro your truck sounds really good sorry you haven't heard from me in a while I've been really busy lately hope everything is going well for you take care chat soon

[@shaneman20]

Thanks!

[@americandream7419]

I want my truck to sound like 18:31

[@zackerypimentel9963]

Dude I work with ya! Crazy

[@tylerblank7565]

So 411 hp to the wheel or engine????

[@dannyboyrides4507]

to the blinkers

[@abexp1379]

What did it cost !!

[@Xtinct_r]

You should do black tips & coming straight out the back from the rear bumper. Kinda like a corvette

[@MDiAngelo]

I missed it.... What did the truck put out on the Dyno?

[@John-4649]

What exhaust set up and mufflers are you running?

[@elcompamemo3778]

Been wanting to cam mine, sounds mean bro,,

[@robertgarza8529]

So did u get to fix the alignment cuz am order the same kit an I know u had some trouble

[@EverydayJ1786]

Shane , I had unsubscribed a while ago . I didnt really like how you lowered the truck and I didn't really understand where you were going with the truck but at the end of the day it's your truck and your money right . What got me was that bad ass cam at idle 😁 If it were me I would tone down that exhaust and put the truck back to stock ride height ,the truck would be a sleeper which IMO is much cooler. Sometimes being less flashy asking to be noticed is better.

[@qwkartist]

Bout fuckin time

[@JuanOrtiz-jf2em]

Nice

[@ProformanceTrucks]

Streetcraft Houston?

[@shaneman20]

Streetcraft Indianapolis.

[@RoadhouseTexas4288]

What exhaust and can set up do you got.

[@YungSossi]

What’s the duration & LSA rating on that cam? Also did you do an AFM delete?

[@shaneman20]

AFM is deleted. Custom cam. So, can't say specs, but it's probably more appropriate for a 6.2L if that says anything.

[@MrSantos210]

Nice truck bro how many hp got on it just wondering

[@bogey19018]

My 15 only puts out 340hp at the wheels and it has a cam, long tube, tune, granitelli coil packs and plugs, intake, 2800 stall. Did my tuner not do a good tune?

[@MrSLPCamaroSS]

Probably not, my 14 Silverado makes 354 rwhp with l86 intake and ported throttle body headers and x pipe. No cam yet

[@jakepennington8507]

Lift? Duration? Lsa???

[@mckinleymckeehan7511]

Still running well?

[@shaneman20]

Well, it's currently stored for the winter, but last time it ran, it ran pretty good.

[@armandoochoa4028]

Love your truck, i was just curious what are your gauges for?

[@shaneman20]

Only actual gauge I have is the AEM AFR gauge so I can see my air/fuel ratio. Everything else is open for the time.

[@armandoochoa4028]

Shaneman20 what exhaust would you recommend, im planning on doing the same to my truck

[@zackpowerusa]

I'm just curious, what's a big cam for a 5.3?

[@lancetyler3872]

How much was the totall price for all the stuff you had done

[@nickgrayy]

If only I could get a cam grind spec LOL

[@robert88gonzalez]

What are the dyno numbers is what I want to know

[@The_Fat_Pipefitter]

What’s your exhaust setup?

[@BLACKLACDTS]

Needs some 4.10s!

[@jamesrobinson9062]

Can manufacturer and specs please sir that’s what I want

[@Thenboomdone]

hey just wondering how many miles you had when you got the truck cammed? thinking about doing the same to my 2014 silverado but i still have a year left on my warranty.

[@shaneman20]

84k