BIGGEST EVER Camaro Front Bumper Wrap With Inlay And Knifless Tape

[@MojoKc2244]

Wow, this was no small job !!! I have nothing but respect for your talent, skill and dedication and an amazing abount of patience. I have screwed up panels a fourth that size. Thank you for giving me hope and a few pointers. This video was a great visual.

[@TheBadtobeblown]

Wow I asked for a hiw to on the bumper and you gave me an hour back. Wow thank you man

[@CKWraps]

🤘

[@greatheathen]

Sorry guys, my video was not working. I call BS. I wanted to see that part more than any of the video.

[@bevmcmullan-kungl8089]

Looking good, Christian. I love the video of the end result. The colour is very unique and looks fantastic.

[@KantstandlamGarage]

So satisfying seeing you wrap bumpers Man. Thanks for informing us on your techniques!

[@hdesilencio2010]

A tonne of respect to you man. This is not easy. You take pride in your work and you are meticulous. Wow. I can see that it's worth paying good money for quality work.

[@sfgwraps1801]

great stuff man, I watch a lot of different installers and you give some great advice. Now constructively I would suggest 2 things.. an IR heater on a stand, as a one man show having this a few feet away will increase the ambient temp just enough to soften but not too much that you over stretch. secondly that gravel or dirt on the bottom cant be good with all the static potentially drawing into the film. other than that keep up the good work!

[@Smokin07ram]

Bad ass job Christian! I don't normally like that kind of film but Avery got it right with this one!

[@LurkMoar101]

Every video with this colour just makes me want it more. Nice sneak peak of the Ferrari coming along too.

[@zanderk3715]

never saw the knifeless tape, why I watched this video to begin with ... looks sick though

[@datdaytona9174]

came out great as always but you had me with mini anxiety attacks with all that debris on the floor under the bumper

[@deantremcdonald2620]

I have a Camaro just like this and I'm planning on giving it a wrap now. Thanks for the heads up on the bumper lol. I think I might take it off and wrap it if it makes more sense.

[@CKWraps]

It's much more difficult to wrap the bumper while it isn't mounted to the vehicle

[@deantremcdonald2620]

@@CKWraps okay. The last thing I want is more work. Appreciate the help!

[@topwrapzltd]

arhhhhhh man really wanted to see how you got to the knifeless to cut the over laying piece that you folded in on that middle section, sadly this piece was cut out and the bumper was much more complete in the next frame. can you walk me through this please?? i hope you understand what im asking..... Thanks for the video man.

[@jonaruiz2414]

Good as vid!my stang has a similar shape bumper but i only need to wrap the middle section. It's very similar to my 2011 boss 302 front bumper.

[@groundpilot705]

New fan of the channel. Love seeing the outcome. Would love to get some hands on with some of this product. I think it adds a quality finish to your vehicle and protection to boot. Have never wrapped anything before and I wish I had discovered this earlier in life LOL Ill definitely be watching. Keep up the good work brother.

[@20tea]

Any suggestions on the direction the vinyl should be laid with it being a color shift?

[@davidmegret6852]

I learned a great trick for doing solo bumpers using the backing as a bumper pole from Rainer lorz

[@fabianabegglen1]

Hey christian. Can you do a POV of a camaro bumper and side fender. Would be awesome. Good work man

[@davidliu7955]

how much vinyl do you recommend buying for that car

[@fabianabegglen1]

Hi there, is it easier when i remove the bumper(front and rear) completly to wrap. Or what do you suggest. Do you loose it on each side to have access the vinyl? I really like your videos. Well done

[@fabianabegglen1]

Hey mr CK Wraps. What was the height of the cutted vinyl for the front bumper. How many inches?

[@claude3990]

WOW, that looks really cool and great work

[@Tain950]

That is an absolutely beautiful color. I’ve heard this purple wrap from them is one of the most challenging wraps to deal with when it comes to putting on. Feels like I’ll have to go heat gun crazy for this wrap 😂

[@juanD23]

Do you have any wrapping of a Nissan Maxima?

[@headlightdesigngradacac]

Dirt bellow the car... Is it gonna be pulled to wrap by static electricity? Sorry if it doesnt make sense, engliah is not my language.

[@gloriousrunningpotato]

Do you prefer using WrapCut tape or 3m Knifeless Finish Line tape ?

[@cptiprod]

I see a lot of talk about cold stretching as much as you can and only heating for deeper parts or corners as needed. You seem to heat and stretch across the bumper. Doesn't this fade the color of the wrap? Can you explain why you don't use heat only for killing the vinyl memory or for recesses? Genuinely curious, about to do my first wrap.

[@CKWraps]

When wrapping a bumper with this much "taper" at the top + bottom middle and upper and lower corners we must add heat. If you watch any installer for example Justin Pate. You'll see how he also will stretch the film across the bumper using heat. Yes the color can fade if you stretch too much. The idea is obviously not to over stretch the film. Also I did heat along all of the edges + corners. I did not heat around the fog light area since it wasn't very much stretch. With all bumpers it is mandatory to heat and stretch across the bumper. This doesn't necessarily apply for all panels. Also, depending on the temperature in your work space, if it's let's say 90 degrees then you would most likely not need to add much heat if any at all. So how much you heat the film will also depend on the ambient air temperature

[@brendanf2705]

Hey Christian pretty sure you’ve already read the comments but a few of us really wanted to see the bit that got missed in the way of sorting out the knifeless behind the main wrap haha… Have you got any other videos that do cover a knifeless with an inlay and how you setup the additional cuts on the larger wrap over the top of those areas to then pull the knifeless through it?

[@tylerbush6342]

Is this a high risk bumper with peel back? Did i come back?

[@heathervredenburg8747]

Love your videos! Quick question. Would you suggest/prefer wrapping a bumper while attached to the car or before installing the bumper?

[@CKWraps]

I remove it, disassemble it and then mount it before wrapping while some of the pieces are removed.

[@G_Ozare]

Chris, is that the same watch you were wearing in a 2014 video where you were wrapping a driver side-view mirror in carbon?

[@CKWraps]

Yes it is, 30 birthday gift from my wife

[@McGrathMotorsports]

how do you not get adhesive lines from this?

[@davidmegret6852]

Blood Bath McGrath probably bc it’s Canada and super cold

[@mikeinnovationgraphicswrap3763]

In my experience that's only hairnet to me with 3M film.

[@III504III]

love your videos bud. Self Wrapping 3M Satin ghost Flip Pearl in the coming months :)

[@luamayav]

Why wrap all the way under the bumper?

[@joncowen3275]

Thx so much bro for content bout to wrap mine !

[@felixlugo9109]

Great video as always

[@michaelbouquet1372]

Candy apple chrome wrap

[@paskracing77]

Where are you located

[@CKWraps]

Ontario, Canada

[@bobbyroberts5751]

He may not say it but he hates every second he has to use 3m 😂😂😂

[@omnione12]

This is so cool

[@jonaruiz2414]

issa v6

[@richardturk7162]

Why do some of the wraps look like they have orange peel ?

[@askeen8796]

those are made to look like a "factory" paint job where most cars' paint has orange peel to some degree.

[@nobody3923]

I absolutely hate painting these oversized bumpers 🤦🏻‍♂️ every time I see one of these in the shop my day is ruined 😣

[@JROB82]

Second

[@princedabest5945]

Lol u took a day to do this bumper and not 1 hour bcuz it look like very difficult ! All people Can not to do it !

[@gotyoazzleakin9860]

First

[@JohnnyDub16]

follom follom nope

[@megacamaro69]

Dude you do great work but I could paint this faster then messing with that stuff.

[@RandomRandomnessKCMO]

Kinda what I thought .... All the disassembly involved is no different than a color change in paint .... Plus it lasts longer anyway ..

[@Stickerslapper]

Alot of the custom colors that are offered from 3m, avery, or vivvid would be super time intensive to replicate. And if you are offering those types of paint jobs for $2k-4k and making money? Well..... More power to ya.

[@sfgwraps1801]

paint has it's place but I've painted numerous personal cars and builds to 10k-20k rock chips still chip the paint plus if it's anything of substantial value Porsche/Ferrari/etc paint decreases value. also when that damage occurs you'r back to blending and matching. with wrap films you simply replace the panel.. both have their place

[@Telelikeitis]

So where you gonna find for instance, purple matt chrome paint? It's the colors that make the difference.

[@Rookz]

Robert G yeah...and make it irreversible...

[@nuyires5195]

Every video with this colour just makes me want it more. Nice sneak peak of the Ferrari coming along too.