#BigRigGB

#BigRigGB... hosted by @Jeff'smodelgarage
i have decided to throw in the towel on this kit...it has given me a hard time from start to finish... i'm sorry jeff this kit was work not fun... so i have to cut my losses.. enjoy the video😒
...if you like my content please hit that subscribe & like buttons & don't forget the thumbs up...
if you like model trains please check out my model railroading channel here
/ @dacuzzz

[@smithgroove945]

Deep breath Vinny. She's done. I think it turned out great. Thanks for sharing.

[@dacuzzz6951]

hi Smith... they could at very least give good instructions... oh well ....you live & learn... on to the next project... thx 4 watching & your comment.. vinny

[@Cavoritestudio2K2]

On the upside... the paint looks really nice, Vinny!

[@dacuzzz6951]

hello Cavorite.... the painting is probably the only thing that went right.... one of these day i might finish it.. thx 4 watching & your comment... vinny

[@ronmoen.]

Even with all the problems you had, it looks great. Have a good week.

[@dacuzzz6951]

hi Ron....there are always going to be something going wrong in a model kit.. but this kit is the worst starting with the instructions... one of these day i might finish it.. thx 4 watching & your comment... vinny

[@gavinbooth]

You gave it your best and it still came out looking very good Vinny , Regards Gav.

[@dacuzzz6951]

hello Gav.... thank you so much for your kind words... one of these day i might finish it.. thx 4 watching & your comment... vinny

[@davidchin350]

Looks good Vinny, hope you finish it soon. Those AMT semi kits are old molds and lots of small pieces but you learn a lot about trucks.😊

[@dacuzzz6951]

hi David.... i just wonder how many others that have built this kit had the same issues... in all the vids i watched no one showed the build ...always segments or time lapse...i agree you do learn a lot by building models...i did a lot of research on all the air lines for the brakes & air suspension...one of these day i might finish it.. thx 4 watching & your comment... vinny

[@pappytinkers]

It still looks great Vinny! All the details and effort really show. When a fits perfectly, it's easy to make look good, but it takes skills to make one like this look so good!

[@dacuzzz6951]

hi Pappy....this kit challenged me from start to where it is now...one of these day i might finish it.. thx 4 watching & your kind words.... vinny

[@openexhaustmodels5139]

Looks real cool mate👍 I had same problem with bumper, so I made mine a curbside

[@BrianSanders-tn7pi]

Hi Vinny. You got there in the end. I,m sorry that you didn,t enjoy the build. I don,t do trucks but I know that there is a lot to them. Also I model small scale 1/72nd so one of my trucks is about as big as the fuel tank on your truck. I like the paint job and the hood decals. Look in your stash and see if you have something that you will enjoy. Get back the love my friend. There's nothing worse than thrashing away at a deadend. But well done and don,t be to dissapointed. Good luck.

[@dacuzzz6951]

hello Brian... i don't think there is a model that doesn't have some sort of issue... but this truck takes the cake... any how it's done as far as i'll go with it...my aircraft models are 1/72...thx 4 watching & your comment....vinny

[@BrianSanders-tn7pi]

@@dacuzzz6951 Hi Vinny. Thankyou for your reply. I agree with you. There is not a single kit that I have made over the decades that didn,t have some issue's. I always say now that I never build a kit straight out of the box , there is always some problem or another. I do also do a lot of scratchbuilding. But that is through choice mainly but I do also do it because the part is a very poor representation of the real thing. I like you are a finescale modeller but unlike you I do it in the small scale. People often ask me "How did you do that ?" With patience. Something most modellers are blessed with. Kindest regards , Brian.

[@JeffDonahueScaleModeling]

Hi Vinny, some kits are full of issues. Sometimes it's better to just move on to something else. I'll bet others have had these same issues too. Thanks for sharing. Have a great day. Jeff

[@dacuzzz6951]

hi Jeff....i just wonder how many others that have built this kit had the same issues... in all the vids i watched no one showed the build ...always segments or time lapse..one of these day i might finish it.. thx 4 watching & your comment... vinny

[@bnsfcsxbob1526]

You did a good job Vinny. I built this kit in the original version had the same problems you had. I think they reproduce the same kit. I still have the same problems. A lot of the old AMT truck kits had a lot of the same problems and they reproduced them all and never fix the problemsbecause it wasn’t a lot of people out there making semi trucks, tow trucks, firetrucks, etc. don’t get you down. You did a great job on the build. Thanks for sharing Bob.

[@dacuzzz6951]

hi Bob... welcome... hope you stick around for better models from me...this kit was a nightmare...this kit challenged me from start to where it is now... the instructions suck.. any pre-drilled holes had to be enlarged... adding the front bumper then the hood wouldn't open because it hit the bumper & finally the hinge breaking was the straw that broke the camels back... kit challenged me from start to where it is now... thx 4 watching & your comment... vinny

[@petesmodelcarcustoms584]

Wow. You've had a battle there. I would suggest drilling and pinning the exhaust and rebuilding hinge with sheet but I don't know what you could do about bumper except for extending the mounts out further🤔. I haven't got one to look at but others have built it,I'd see what's on other yt vids.Thanks for showing and best wishes for your next build👍😎Pete 🤓

[@dacuzzz6951]

hello Pete.... thank you for your suggestions but for now i need to put this one on the side & move on to something else...this kit challenged me from start to where it is now...one of these day i might finish it.. thx 4 watching & your comment... vinny

[@ramblers69]

Turned out really nice Vinny

[@dacuzzz6951]

hi Tom... the funny thing is ...i have 2 more big rigs in my stash... makes me.... think.. do i want to build them???. thx 4 watching & your comment... vinny

[@1968fordman]

Vinny, that sucks about that kit. Sometimes it's best to walk away and come back to it later. It still looks pretty good👍

[@dacuzzz6951]

hi Will.... i agree .. this kit is going on the shelf & maybe...just ...one of these day i might finish it.. thx 4 watching & your comment... vinny

[@AmateurScaleModelBuildi-lj3so]

Looks pretty cool, Vinny. Really stinks about the quality. You did an awesome job considering what you had to deal with

[@dacuzzz6951]

hi John... this kit challenged me from start to where it is now...one of these day i might finish it.. thx 4 watching & your comment... vinny

[@MadGeniusProductions_MGP]

Even though it fought you all the way Vinny it still looks good. I'm with you, once a kit becomes more of a job than I'm done with it.

[@dacuzzz6951]

hi Joe... i was/am so close to the finish line.. when the hood hinge broke .. that was the final straw ... i was starting to wonder if it was me... but when a pre-drilled hole has to be enlarged or the hood not to operating after you install the front bumper in it's proper location ... that's the poor QC .. thx 4 watching & your comment... vinny

[@ralphgreenwood5857]

Sad to see you throw it in Vinny. There were a lot of problems on this one. I can say that AMT was never really my favorite brand of car or truck model. It seemed they were always molded in plain white for one thing. The paint job does look Awesome!! 🙂👍

[@dacuzzz6951]

hi Ralph...AMT does have issues but this kit is the worst so far... any how it's done as far as i'll go with it... thx 4 watching & your comment.. vinny

[@tanzj]

Wow. Like I mentioned once before, it was probably done by Walthers….😊

[@dacuzzz6951]

hi John....not all the model kit instructions are top notch but the one in this kit really suck... i am as far as i am going to go right now...this kit challenged me from start to where it is now...one of these day i might finish it.. thx 4 watching & your comment... vinny

[@bigeddie1231]

We’ve all had those kits and looks like this one is yours have to walk away and come back to it in a month but what you’ve done looks really good so far

[@dacuzzz6951]

hello Eddie.... i agree.. this one is the one i need to put on a shelf & maybe some day finish it... thx 4 watching & your comment... vinny

[@Joethemodelbuilder]

Hey Vinny sorry you had so much trouble with that kit. I guess at that point when a kit becomes so frustrating it's time to move on. Don't let it get you down buddy it happens.

[@dacuzzz6951]

hi Joe.... i was starting to wonder if it was me... but when a pre-drilled hole has to be enlarged or the hood not operating after you install the front bumper in it's proper location ..time to put this one on the back burner.. thx 4 watching & your comment... vinny

[@KerleyExpress]

it looks sharp

[@dacuzzz6951]

hi Dwight... thx 4 watching & your comment... vinny

[@Jeffsmodelgarage]

It’s funny that two of the same kits can build totally different my wrecker gave me hardly no issues the frame was my issue other then that it was ok not great but ok sorry it fought you Vinny thanks for your support and trying it don’t look bad buddy k.u.t.g.w.

[@dacuzzz6951]

hi Jeff... i was starting to wonder if it was me... but when a pre-drilled hole has to be enlarged or the hood not to operating after you install the front bumper in it's proper location ... that's the poor QC .. anyhow thx for doing the group build... vinny

[@dexterdog62]

I’m glad you’re having fun with the models, but I wish you’d get back to the trains…

[@dacuzzz6951]

hello Dexter... hopefully i'll be back on the new layout by the end of the year...thx 4 watching & your question... vinny

[@HotrodzModelShop465]

It's still a Cool Ol' Wrecker even though it fought you. I doubt the problem was your doing. It seems like some kits just don't want to be built. Have a good one Vinny.

[@dacuzzz6951]

hello Marcus... thank you so much for your kind words... i was starting to wonder if it was me... but when a pre-drilled hole has to be enlarged or the hood not to operating after you install the front bumper in it's proper location ... that's the poor QC ..thx 4 watching.. vinny

[@HotrodzModelShop465]

@@dacuzzz6951 Have a good safe 4th tomorrow Vinny.

[@russellpoland6637]

Well, all of the hic-cups and burps aside, it looks good to me. On a serious note, should You decide to get rid of it, I would gladly trade You a kit or three for it. If You've a mind to. Just saying, I can't find that kit around here, so, just sayin" Vinny. Thanks for sharing the build with Us. Looking forward to the next video! Take Care, Be Safe, God Bless, Later

[@dacuzzz6951]

hello Russell.... i am going to keep this model ... but if you are interested i do have another Pete359 Conventional partially started & a Kenworth W900 i;d be willing to work a deal with you.. if you are interested contact me at [e-mail] ... vinny

[@steve87thpsap]

Well that’s unfortunate Vinny, sometimes they do just kick your ass.

[@dacuzzz6951]

hi Steve... i guess " you win some... you lose some" the kit won the battle but not the war... i was starting to wonder if it was me... but when a pre-drilled hole has to be enlarged or the hood not to operating after you install the front bumper in it's proper location ..time to put this one on the back burner.. thx 4 watching & your comment... vinny

[@kirknitz3794]

If it was HO, you could put it the junkyard.

[@dacuzzz6951]

hi Kirk... it's actually G scale which means a bigger junk yard...LOL... thx 4 stopping by & commenting... vinny

[@joeraderblackrockcentralrr]

Time to go back to trains VINNY

[@dacuzzz6951]

hi Joe.... the kit won the battle but not the war... hopefully i'll be back on the new layout by the end of the year...thx 4 watching & your comment.. vinny

[@daveschenkel1446]

I would have given up a long time ago.

[@dacuzzz6951]

hi Dave... i guess i'm a glutton for punishment... LOL... the kit won the battle but not the war... thx 4 stopping by & commenting... vinny

[@jimtedesco]

Looks good to me, but its obviously not a good kit to build.

[@dacuzzz6951]

hi Jimmy.... there was a lot of stupid stuff... like parts not fitting in holes the factory drilled & the holes aren't straight.... the kit won the battle but not the war... thx 4 stopping by & commenting... vinny

[@goforitpainting]

Looks cool. 🛻

[@dacuzzz6951]

hello goforit... thx 4 stopping by & commenting... vinny