BIKEBERRY - Schwinn OCC Chopper Motor Bike

[@GenMinion]

Can't wait to get my Green OCC Stingray fixed, then I'ma invest into a motor for it. Gonna be SO sick.

[@GenMinion]

@Suction All those years ago, yea, I did it, messed it up more, refurbed it, bought a black one and mega sized it with a 66cc, then traded in for a beat up red stingray, chopped it, extended it, and turned it basically into a motorcycle with a Predator 212 on it. It's sweet.

[@armandozuniga7418]

@@GenMinion any tips on building? You got a channel? I have a green and a black one im tryna motorize

[@suprakilzz26]

i love that exhaust, sounds soo much better than the stock one..

[@jub369]

If you do one of these CORRECTLY, you DON'T have to bend metal, or shave the hub, or shave the fender, you also don't gotta drill holes into the frame or even use a chain pully i know i make these non stop they have 80$ engine mounts to mount these perfectly with alan bolts , using the CORRECT amount of links and half links you have the perfect chain tension then just pull the brake arm up a little bit using a extra washer and instead of filling the hub take the SPROCKET to a hardware store and have them make the same size hole ABOVE the included holes then connect the holes so it's a long gated hole OR get a sprockt adapter so it turns by the axle and not by the spokes

[@asphaltcowboy7868]

I have built two of theses choppers..currently working on another at the moment...my current is a reverse head 100cc..with a 36 tooth sprocket..I found the best way to do the chain adjustment is to have the adjustment sprocket guide the chain over the rear brake cables and brake arms...

[@sasajugovic6984]

It's a beautiful bike,old school look,love IT great job

[@russbilzing5348]

I'm an old fart, and when they first brought these out, I knew I had to do just exactly this. It took me until three weeks ago to find one in NEW condition I could afford, @ $200. The 82nd Airborne 2 stroke V-Twin Generator motor I had planned to use had been stolen, so I may just grab something off the rototiller and let fly.

[@Goblingimp]

what the hell thats a crazy motor im just a kid tho man thats cool ima get one of there and get it fixed up guess the design held up all these years bc its pretty damn cool But you were gone put a 1000 dollar engine on a 200$ bike ??? why

[@russbilzing5348]

@@Goblingimp Well, I got the motor when someone moved out and gave away a bunch of stuff he no longer wanted. I don't suppose it cost $1,000, but I wanted to use it because it was very light. Made for being tossed out of airplanes and carried through jungles to power radios etc. Since it was also a V Twin, it would have looked nice with a small sportster tank.

[@johnbaker3817]

If that's from Orange county choppers, That's probably the best bike they've ever built.

[@guidosarducci8850]

I'm building one right now. Really nice looking!

[@roymakescomics]

I just bought a kit that fits mine perfectly. You don't need to destroy your bike or mod it any further to accommodate for anything.. doing so may risk structural integrity of the frame over time.

[@slimelove6977]

which kit did ya pick up? thanks

[@asphaltcowboy7868]

Remember not all bicycle frames are designed with the same measurements...

[@TrevorLuedtke]

I am making one now what is the handle bar adapter? Did he make it?

[@bikeberry]

Hey we love the build Ed! If you could put BikeBerry in the title then you'll be officially entered in the contest!

[@TheEddo63]

BikeBerrycom Parts from Bikeberry... Thanks guys

[@bikeberry]

Congrats on being one of the winners:]

[@RalsyEU]

Cool bike :)

[@jesusvalles1266]

@@TheEddo63 como la hiso me puede decir porfavor que la voy hacer

[@catsbyondrepair]

Lol scam berry posted something.

[@UbayLanas]

Thanks for posting this video. How fast is this bike? Where did you buy the engine kit? I wonder if you can direct me to it?

[@elibitrick]

its a nice bike but the seat needs to be set down on the frame and the handle bars need to be up higher

[@marcdouglasvogt7167]

You can use some Shoe-Goo you can get at Walmart where the shoes are that will hold the tank on without bolting it on just fine, tape it down with blue paint tape overnight while it dries, so you can get the tank out of the way of the seat. -marc27

[@thatbme35]

rubber on the motor mount. Good job! that chain tensioner has got to go bro.

[@大疯狼]

Did you seII this recentIy? I think I saw the ad xD an identicaI bike in an identicaI driveway on kijiji canada (ottawa)

[@caduceus33]

Nice build, Ed! I must say, though, video would be best without music .

[@Mash3OH3]

It's funny. I built my first electric bike on a Banshee Scratch frame. Then suddenly one day I said to myself. I should try putting a 100cc together. And that's when my tinkering began.

[@danielstanley4852]

Ed I recently picked up a 1977 Batavus HS50. I noticed the one you restored on one of the Moped sites. What paint color or paint code and type of paint did you use to restore it?

[@Championlakers22]

Is that a 80 cc 4 stroke or 2 stroke motor

[@vicenteluna2708]

Como fijaste el tanque de gasolina

[@edivaldogalvaomerlo816]

Qual motorzinho que vc usa ai na sua bake choppe amigaoeu tenho uma bake dessa mais nao sei qual motor cerve nela

[@kennyh5083]

very cool Bike!

[@charlieloomis1867]

Chain Guide Nice I Need To Adjust Mine

[@aslFsldDFlg]

THIS IS A BIKE HELL YEAH!!!

[@Skimeric]

Sick job. Too bad the pedals don't seem to function anymore

[@X_Death-vg8sj]

Could give us a link to the mount

[@TheKing-dm3br]

Can anyone tell me what brand of tires those are?

[@caitlynnerogers4658]

where did you get that back sprocket that you drilled holes threw ?

[@TheEddo63]

Have now upgraded carb to CNS2 High Performance. 35 mph!

[@zekeworst9193]

How well would it ride with someone who’s 5’8” and roughly 150 lbs.?

[@dillongates4520]

It should be fine bc I'm over 6 feet tall and I weight 200 lb it still takes off pretty quick

[@Michael-fq3rz]

I'm making one too

[@kofelee2358]

Yeah I'm only 126 pounds on mine.and I'm 54 years old .it holds ,,strong,,

[@whitechrist2965]

As cool as I think these are I don't think they are safe to ride in traffic. It's bad enough riding a regular bicycle/ebike/gas bike but one that looks like a motorcycle is going to confuse the already confused cagers. In other words better to have them thinking a bicycle is going fast rather than a motorcycle is going slow. Just my opinion but it's dangerous out there.

[@TheEddo63]

The motor mount is necessary to mount the motor. The frame is too large to allow the motor to mount directly to the frame. Go See HappyFeet on Ebay to purchase.

[@fernandocastillo8026]

Hey I can’t find it could you send the link

[@danielkeirsteadsr6939]

The chain tensioner look bad on that build

[@dylangraff5196]

Did this bikebarry kit have everyrhing you need to mount and ride?

[@asphaltcowboy7868]

Kits come with the standard engine mounts that commonly used on a common mountain bike...the chopper frame is not a common bicycle so you have to buy or modify your own engine mount

[@littledaviso]

you don't need the motor mount do you? most others don't have that

[@asphaltcowboy7868]

The frame on the chopper bicycles are stretched too far apart between the front support bar and seat post bar... you have to have or build a modified motor mount for the chopper frame...they can be easily found on eBay or Amazon..they make two different styles...either one is fine.. one mount is a two plate design that is squeezed together like a sandwich on the lower cross member bar and the other design is basic two extended engine mount clamps that can extend long enough to reach the front support bar to the front of engine and another extend engine mount clamp that extends long enough to reach rear of engine to the seat post bar....got to remember that the chopper frame is stretched frame compared to your common mountain bike....

[@SRT_Daevon]

Just started my build today

[@accidental_relevance]

Has anyone seen a video on how to true up the rear wheel on an OCC bike? Not really noticeable a low speed but bounces when going faster

[@asphaltcowboy7868]

Sounds like a bearing issue in the rear hub

[@accidental_relevance]

@@asphaltcowboy7868 I'll need to get it checked out before installing the 1000W mid-drive

[@kofelee2358]

Good video,,

[@Casualplayer]

I just received my engine kit today and i have the mount but i got these weird wrong bolts that dont do shit! did you get the same and have to source your own bolts?

[@connorbarkie5013]

the ones with circles on the top?

[@Casualplayer]

Connor Barkie yes! I just got my own but i was still confused. Did you mount your plate dirctly in the center? My cranks just barely dont make it

[@connorbarkie5013]

+Casualplayer I'm still in the same boat little confused gonna try to work on it all weekend we will see..

[@Casualplayer]

Connor Barkie lemme know how it goes. Im at work and dont get out til 11 :( cant work on it lol ill have er running tommorow tho. Hopefully

[@winfreddecamoyan]

what is the size of your bike?

[@jasonstuck7080]

Lower that seat and raise the bars. The way you had it made it look like a tricycle

[@darrinmccorriston7878]

Can I get one shipped to canada Please

[@darrinmccorriston7878]

Can I get one shipped to. Canada

[@emelen123jamesula2]

2 or 4 stroke?

[@Luizz1984]

badass bike Ed, but where can i get that handle bar from?

[@TheEddo63]

Rico suave Found the bars on ebay.

[@Luizz1984]

Ed Ringle to many different sizes lol..i don't know what to pick. what size is that on your bike, that is exactly what i am looking for, and thanks a lot for your reply.

[@xemirov9298]

Ride easy, ride free

[@ihlovers9190]

where can i find ape hangers for this bike

[@ihlovers9190]

if some knows send me a link to it thankyou

[@babychris2782]

That’s cool and I have a electric 1

[@donkimp473]

Sounds like it's still in the break in period.

[@shivarazrushitel8620]

Very cool Cheper! Greetings from Russia;) How many cubic centimeters in it? in Russia can be 49 cubes without any additional rights.

[@redhotfilms.5317]

THAT THING IS SO BADASS

[@makaveli087]

Born To Be Mild!

[@armandozuniga7418]

A tutorial video would get you millions of views im just sayin

[@traceykays433]

Great job

[@jaimeluna4636]

Excelente!!!

[@Frank_Hwhite]

really, with the Steppenwolf already?!?!?!.. gawd damn mopagans

[@eddielantrip6259]

How about a,4stroke

[@jimmyhaley7773]

damn loud music killed it for me

[@ephesusrh4780]

same

[@cainhaggar796]

@Tommy Kavanaugh what stuff you on this is some good stuff

[@marcdouglasvogt7167]

You can use some Shoe-Goo you can get at Walmart where the shoes are that will hold the tank on without bolting it on just fine, tape it down with blue paint tape overnight while it dries, so you can get the tank out of the way of the seat. -marc27

[@heavystarch100]

Ooh...not a good idea.😳

[@johnsmith4630]

how tall is rider?

[@TheEddo63]

5'8" 200lbs

[@johnsmith4630]

Ed Ringle thx. looks like a 6-6'2" guy would be grammed on there, even w different handle bars

[@marcdouglasvogt7167]

I am here because I am also at Ebay, and as I could already tell by looking at it, that 'Motor' Mount Kit is not at the correct angle for the engine. You want the gasoline going into the engine, that is the point of having them tilted forward, have fun pushing it up hills, which is kind of the point of having a bike with an engine in it in the first place. Motors are electric, by the way and have no 'working' parts. -marc27

[@heavystarch100]

You're trying hard to sound intelligent or clever..failing at both. Let it go no one cares!!😂😂😜

[@jasondankenbring1710]

Fuck that. 350 is an insult. I'll offer you 351. Go ahead and pretend that you need to think about it and then hit me up, lol. Seriously though, nice bike, my friend. I'm about to do one myself. Is it a difficult build out?

[@martyevanson8661]

I just picked one up for free

[@سعدمحمد-ه4و7خ]

ممكن استوردهااا مصر

[@bugraboikevich6969]

Allah'ını severim senin dayeeeeeeeee

[@scottcarson1973]

Nice but riding around on a kids bike looks a bit goofy

[@gregorylee6255]

Not really we all should have a child's heart when it comes to certain toys or others hobbies

[@666mrjimbo]

Nice bike,Better Tune Steppenwolf forever 666 OUT

[@JPSimen]

Mines way better. Didnt have to cut or bend or accomodate. Anything on the actual bike. 10 dollars worth of aluminum does not warrant to drill into a bicycle.

[@NahFam13]

J. Simental S. Mine*** illiterate ass, let the man post without you trying to one up him 😂

[@fernandotorres-iy1nj]

Post a link

[@asphaltcowboy7868]

I wouldn't sell either one of mine for less then $800...JS

[@heavystarch100]

Dude looks like an older chubbier Shane McMahon!🤔😜

[@kennyh5083]

I'd lose the 2-stroke tho! get a 4-stroke!

[@clintsherman5797]

What a gaylord

[@phantomking01010]

i welded my sprocket to the frame lol

[@marcdouglasvogt7167]

Why the fuck would you do that? -marc27

[@highonbetter]

I'll give you 350 cash for it. im in mi as well )

[@jasondankenbring1710]

Damn. That's mighty White of you. It's hard to imagine he didn't jump at such a sweet offer, lol. Some people, huh?

[@kevinisbell1867]

@@jasondankenbring1710 little projects can add up in cost pretty fast. And the time involved in driving around getting materials, and figuring out how to make it all work together. 350 is a definitely insulting.

[@nofrop]

lol...way to piss the neighbors off....remod the exhaust

[@TheEddo63]

600 sells it.

[@ernestoarizpe5506]

If you're motor blows it's gonna be a bitch to pedal

[@edututoriais12batista35]

bike the you conrt umaa defrued

[@cipher7911]

is that english?

[@JPSimen]

Mines way better than yours, you have the head facing the wrong way. You have chain tensioner in wrong place. No vision. My sprocket way better, my chain tensioner is made of metal. My engine is 4 times better. My handle bars are off bmx classic.

[@hectorgonzalez4617]

No veo ni madres para que chingao suven este vídeo

[@darkroomignite8264]

I have a belly button.

[@drippinglass]

J. Simental S. Your bike is crap compared to my 1970 Schwinn Grape Krate. ;)

[@ernestoarizpe5506]

If you're motor blows it's gonna be a bitch to pedal