212cc OCC Stingray Chopper Walk around (In Detail)

If y’all like what you see, hit that sub button, drop a comment, and give it a like. Thanks!
And if y’all have any questions that I didn’t cover, let me know in the comments and I’ll get back with you! Thanks
Sprocket Adaptor - Sprocket Clamp Assembly www.amazon.com/dp/B00KWLL3Y4/...
Jackshaft - www.ebay.com/itm/152117648949
Head light - www.ebay.com/itm/372412907755
Rear light - Heart Horse Universal 32 LED Light Tail Strip ,Trailer Brake Stop Turn Signal 3528 SMD 8" Flexible LED License Plate Lights for Harley Motorcycle Bike ATV Car RV SUV www.amazon.com/dp/B01ESM1PHM/...
Seat - Leather Motorcycle Custom Solo Spring Bracket Seat Hard Bottom www.amazon.com/dp/B07H27Z5ZW/...
Light/Turn signal switches - Qiilu 1 Pair Motorcycle Handlebar Switch 7/8" Handlebar Horn High/Low Beam Turn Signal Light ON OFF Switches www.amazon.com/dp/B083NYF1TQ/...
Brake caliper - Rear Disc Brake Caliper Replaced Pad For Motovox MBX10 MBX11 Mini Dirt Bike MM-B80-BR 80CC 2.5HP Moto Classic Mini Bike 47cc 49cc Pocket Bike Stand Up Goped Scooter www.amazon.com/dp/B07BNGJCNG/...
Clutch - Centrifugal Go Kart Clutch 3/4" Bore 10 Tooth 10T For 40,41,420 Chain 6.5HP www.amazon.com/dp/B01M5B8XJ1/...
Pegs - Amotor Bike Pegs Fit 3/8 inch Axles(2 Pcs) www.amazon.com/dp/B07KWWXFGW/...
Exhaust heat wrap - LEDAUT 2" x 50' Titanium Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape with Stainless Ties www.amazon.com/dp/B011B99B0I/...
Crank breather - ESUPPORT Universal 12mm Mini Cone Cold Air Intake Filter Turbo Vent Breather Car www.amazon.com/dp/B00U8L6L22/...
Brake disk - BlueSunshine MTB BB8 Mechanical Disc Brake Front and Rear 160mm Whit Bolts and Cable www.amazon.com/dp/B0745YWT3N/...
Performance filter and jet kit - 212cc Predator Performance Air Filter, Adapter & Upgrade Jet- BLUE www.amazon.com/dp/B06ZZ69WZN/...

[@murderyurface3595]

Bro you did a PHENOMENAL job with this bike. Fr it takes so much skill to do what you've done. most wouldn't even figure out where to start, let alone finish & make it look as good as yours is. You should be very proud of yourself.

[@nobrakesnation]

I really appreciate that man, means a lot. The world needs more people like you! I love my hobby and I’m glad I can share it. Thanks for the support!

[@Free_Krazy]

Man this is NICE, You really have captured the chopper look, especially the big engine, only thing i could see to the complete the look would be to find a small motorcycle gas tank that can fit around the top part of the frame.

[@heavystarch100]

Other than the gas tank...its AWESOME.

[@dariussykes5798]

I love your build im doing a XL Chopper frame like that

[@user-fo6hx2xr2n]

Very cool and amazing

[@nobrakesnation]

Thank you!

[@craftyukraine]

Awesome job!👏 The only thing I’d do is I’d place the pegs onto the bottom bracket. I think it’s the right place for the feet to be placed when you have a long ride.

[@nobrakesnation]

Yes they are not in the best spot haha

[@cschuh4695]

What a great job you did on this Stingray. You didn't miss a beat, especially welding the frame supports behind the engine. I've got 90% of a Stingray chopper that I'd like to convert, but just don't have the money or time. It's been completely de-electrified, including the rusty old guts inside the rear hub. That would be the other 10% that i sent to a landfill. I think I'll just offer it up for sale. Anybody interested, lemme know...

[@nobrakesnation]

Thanks man! Yeah bracing is key. Keep it, take your time and finish it!

[@thebehemoth1998]

Where at?

[@cschuh4695]

@@thebehemoth1998 Gone, History, Sorry...

[@jg1746]

Dude I have 4 bike frames exactly like this. And I plan to use every single one of them ; thanks to this video. I’m most definitely subscribing

[@nobrakesnation]

J Gresh That awesome! You got this! Thank man!

[@jg1746]

No Brakes Nation I appreciate it. Any advice on building it? I have to get a mount and weld it on the frame. Also have you ever thought of using a dirt bike tire as a replacement for the back?

[@brokalikasanvlog613]

How to order?

[@kennyh5083]

In detail? Hell it's like peering thru a key-hole!@@nobrakesnation

[@nobrakesnation]

@@kennyh5083 😂

[@davegoalman6287]

Wow nice

[@catsbyondrepair]

Actually sounds like a super cub.

[@robertmiligi4835]

That is a very nice bike ,great job

[@nobrakesnation]

Thank you!

[@user-xr9yl7si2x]

Saludos. De. Chile. Arica. Te. Quedo. Mui. Vonita. Amigooo. Te. Felisito. Yo. Tanbien. Tengo. Una. Choper

[@stevenstolfi544]

I’m building one right now, harbor freight 212, mb 200 pipe, gps stage 1 race kit with valve springs, tav 2 comet, im going to be adding a solid rear axle soon

[@nobrakesnation]

That’s awesome! Keep up the good work

[@bigfootaintreal5454]

Nice bike dude.

[@mr.equity1120]

Sickest, coolest, raddest bike on here bro! No joke! Where did you get a frame like that? That machine’s a beauty man. I’m fairly new to the sport ( more like hobby ) but I’ve comed across all sorts of builds out there dude & yours is one that stands out mate.

[@nobrakesnation]

I really appreciate that man! Sorry for the late response, just now seeing some of these comments. I don’t think they make these bikes anymore, I got this one at a yard sale. I’ve also seen them on facebook marketplace. I appreciate the support!

[@stevebland1830]

a camshaft... iv built something similar using a 212cc motor on an OCC but wish id thought of that before all the effort i put into having that "long floppy chain" actually work.

[@nobrakesnation]

Sweet man! Oh yeah the jack shaft is the way to go, but I’m sure you’ll still make it work good without

[@Logic325]

Good job

[@nobrakesnation]

Thanks!

[@jujubeans210]

Nice build I been wanting to start one or buy one

[@nobrakesnation]

Nice man!

[@ChristopherJones16]

If it were mine I'd paint that engine cover Chrome and same with the gas tank. It'll look sharp my man. Make some videos cruising on it and have your buddies record you riding it. Theres only a handful of guys on youtube that converted their choppers bikes like this and dont have many videos on the tube. These are sweet projects and i think the videos would get a decent amount of views.

[@nobrakesnation]

Thank you! Good advice. I plan on making another one and will be taking you guys advice to build my next one.

[@Littleevil9975]

Great idea bro they’re nice bikes I built or not that long ago on my channel turned out sweet also

[@AviationAngler]

This is what I'm building but on an occ chopper

[@liammcdonald1879]

Looks good. i am working on my own one as we spike

[@nobrakesnation]

That’s awesome! I see your profile pic, looking good👍🏽, keep up the good work

[@liammcdonald1879]

Thanks, man, and I have updated my picture with an updated one

[@nobrakesnation]

@@liammcdonald1879 that’s awesome man, love the dirt bike tires and the front suspension! Keep up the good work!

[@paulscanlon4568]

For foot pegs u can take one side of the three peace crank off.turn the one where it matches the other.titen the bolt down so the crank is tiet.use them for foot pegs

[@nobrakesnation]

Good idea, appreciate the advice👍🏽

[@paulscanlon4568]

@@nobrakesnation with usingthem that wat it puts more weight lower and balances beter.

[@nobrakesnation]

@@paulscanlon4568 good thinking

[@talonsbmxproductions8165]

I did one

[@Davydoo727]

Hey sick bike I’m thinking about doing the same thing because I gotta shwinn stingray

[@nobrakesnation]

Thanks. Sweet man, you should!

[@GorillaVibes]

I hope your doing it. I am. Motor comes in Friday. We starting Schwinn meets in Florida

[@Oinformante01]

Ficou top

[@cristiangarcia1422]

What size frame is it the chopper frane

[@12xfg]

Great Work @No Brakes Nation/// What was the original investment excluding the Bike & selling price?/// Well if you can share it/// Greeting from Arizona

[@nobrakesnation]

Thanks! Sold it for around $600. I’m thinking about making another one.

[@Dee-qo7gh]

could we see the part of you putting the sprocket on the back tire.

[@nobrakesnation]

Sorry man didn’t record that

[@jehleauto]

Noice dude! I built one too. It doesn't look as good as yours.

[@nobrakesnation]

Sweet! Thanks haha

[@retro-of-Texas]

I have the same style sprocket , how does it hold up when riding? I tried to find an adapter that would fit but it’s so difficult

[@nobrakesnation]

Sweet. Yeah it held up just fine

[@OKLAHOMIESKY]

hey could you possibly post the link for the seat you have? im working on the same kind of project and the seat i have is shot

[@nobrakesnation]

Yeah man, everything I used on the bike is in the description

[@michaelshira6868]

I'm currently building one of these what did you use for a jack shaft

[@nobrakesnation]

Michael Shira www.ebay.com/itm/152117648949 This is what I used

[@Marlevlyn]

Where do you rest your feet?

[@davegoalman6287]

How are was it to add all that an what kind of motor you running on it an is it fast

[@nobrakesnation]

Wasn’t too bad, just took time and patience. It’s a predator 212cc

[@thatoneguy1072]

Would you make a custom one if some one paid for it.

[@nobrakesnation]

Possibly. I mainly do stuff for myself. Only thing is I would feel bad if something out of the ordinary would to happen to it and feel the need to fix or replace it which I don’t have the time or money to do. I’ve got so many projects right now as it is😅

[@willmack4853]

How did you do the disc brakes please help doing a similar build

[@nobrakesnation]

I bought the disk brake and caliper from amazon and basically cut the middle of the sprocket out of it and welded it to the wheel. I tacked the sprocket on and spun the wheel and tapped on the disk till it was balanced then I finished the welds. I set the caliper on the disk and cut little brackets and drilled holes in them to mount it. I would weld the mounts for the caliper to the frame if I was you, mine kept moving when I hit the brake

[@willmack4853]

@@nobrakesnation alright will do thanks

[@davegoalman6287]

I have a west coast chopper rolling a frame an seat but how hard is it to take the other crap off

[@nobrakesnation]

Not that hard with a grinder or sawzall

[@davegoalman6287]

@@nobrakesnation need a welder an some help boss

[@davegoalman6287]

@@nobrakesnation lol

[@mikesautoflips1506]

Where’s you get your magnito conversion kit at

[@nobrakesnation]

I believe it was on eBay

[@donledbetter4932]

How much 4 it

[@lionslide9566]

What tooth sprocket do you think i should get for it? 36 tooth?

[@nobrakesnation]

For what?

[@c-creepruffrecords6102]

Can you make me one

[@hunteranderson1417]

Link to sprocket and attachment for the sprocket?

[@nobrakesnation]

Just did, go check it out! If you don’t mind give my channel a sub and give the vid a like for support thanks!

[@user-nx6us4fw7e]

I wanna know about the breakes

[@nobrakesnation]

I actually took a cheap Amazon brake kit centered the brake disc and welded it to the hub and then made brackets for the caliper, pretty simple. I’ve got more videos with close ups I’ll post soon.

[@joshwhite5142]

How long did the rear rim past on this?

[@nobrakesnation]

Never broke

[@marchennessey5314]

Good job kid

[@nobrakesnation]

Thank you sir!

[@stevebouxsein4691]

What size chains did u use

[@nobrakesnation]

@@stevebouxsein4691 35

[@Davydoo727]

What was the throttle you got and the size it was

[@nobrakesnation]

I think it is generic 7/8” throttle

[@roquecordeiro4163]

Ok mem quero compra uma com motor pq já tenho uma stngRey 3 gostaria de coloca motor. Pf si alguém souber. Me avise ok. Greto

[@fernandocastillo8026]

Hey what kind of sprocket adapter did you use can you send me the link, the only ones I can find that fit are like 60/80$ and that crazy expensive for an adapter

[@nobrakesnation]

Supermotorparts 1" 25mm / 1.5" 38mm CNC Adapter 36T Sprocket Fits 80cc Motorized Bicycle www.amazon.com/dp/B07QDRZD6H/ref=cm_sw_r_cp_api_i_5S7SCXPQ6T606S3R557W

[@nobrakesnation]

This should work, mine was different because it came with a kit I had from a previous project. If you look at pictures of how other people used these motorized bike sprocket adaptors it will show you how to mount them.

[@fernandocastillo8026]

@@nobrakesnation so you’re is the ones that come with the 2 stroke kits? And it doesn’t slip or rub

[@fernandocastillo8026]

@@nobrakesnation so you’re is the ones that come with the 2 stroke kits? And it doesn’t slip or rub

[@yeseniamacias662]

make them to sell !!!

[@headcheesee]

Can you link me to the seat?

[@nobrakesnation]

headcheesee Leather Motorcycle Custom Solo Spring Bracket Seat Hard Bottom www.amazon.com/dp/B07H27Z5ZW/ref=cm_sw_r_cp_api_i_fgNQEb5MM575P

[@newagepage6960]

Where do you put your feet when riding

[@nobrakesnation]

The pegs on the front wheel

[@newagepage6960]

@@nobrakesnation I notice that but I was thinking it was too far away. I might do mines like red beard garage did you see his?

[@nobrakesnation]

@@newagepage6960 oh cool. Yeah I built mine and then saw that he built one haha

[@newagepage6960]

@@nobrakesnation lol

[@davegoalman6287]

When are we going to build my ride bro

[@nobrakesnation]

Whenever bro lol, what kinda bike is it?

[@davegoalman6287]

@@nobrakesnation west cost chopper witch one I don't know

[@davegoalman6287]

@@nobrakesnation I will take. Pictures for you tommorow

[@davegoalman6287]

@@nobrakesnationI got the pics to send you

[@davegoalman6287]

@@nobrakesnation it's red an silver

[@juniorss2012]

What motor is this

[@nobrakesnation]

It’s a Predator 212cc

[@emmettwalker8268]

Mine does 70 mph

[@nobrakesnation]

Sweet

[@bmillertime1546]

WHAT HHUUU WHAT

[@nobrakesnation]

Lol

[@chancegrevious1551]

How do you ride it ur leg is next to the spiny thing 😂

[@nobrakesnation]

You make it work😂. There are pegs on the front wheel

[@angelc3234]

Want to sell it??

[@nobrakesnation]

It’s actually already sold

[@89HamSammich]

It's a chopper bro it's supposed to be obnoxiously loud 🤣

[@xod_silentwraith5561]

Its not "supposed" to be, but it does sound better to some people, and does make more sense. Personally, some people prefer it more of a Sleeper though. In general, this isn't a Chopper Motorcycle. Its a Motorized Bicycle Chopper. The original motorcycles came from pedal bikes, and someone decided one day to remove pedals and see what they could do to fix the pedaling issue. Still uses a chain, but no wear and tear on the body's knees, goes faster, sounds and even looks cooler... Then tada, the first motorcycle. That's not historically accurate, but that's basically how it went.

[@davegoalman6287]

How's it sound bro

[@nobrakesnation]

Sounds pretty good for a pressure washer engine lol. I have more videos on it running

[@davegoalman6287]

@@nobrakesnation right on but my problem is I don't have a wilder there

[@nobrakesnation]

@@davegoalman6287 welder? Maybe could get a buddy to do the welding for you?

[@davegoalman6287]

@@nobrakesnation iam hooked for sure now on this bike build off

[@davegoalman6287]

@@nobrakesnation when I use to ride I got the nick name pan head speedy

[@RaoulDuke224]

That bike requires a motorcycle license because it's no longer a bicycle

[@RaoulDuke224]

You took the pedal bars off

[@nobrakesnation]

Good thing I have my M license haha. You’re probably right

[@Copelmaoooo]

Actually in most states if it goes 30 mph or more than u need a drivers license

[@jlovee2211]

Bro your legs aint 10ft long how u gon look while u making a turn

[@nobrakesnation]

Yeah it was pretty awkward lol. I would take my feet off the pegs and rested them where the old pegs were. Next one I build will be better.

[@thebehemoth1998]

I’d buy a kit off you.

[@nobrakesnation]

Sorry, I don’t sell kits. That would be cool though!