BIKE CHECK!! MY NEW 2024 HUSQVARNA TE300i HARD ENDURO BIKE

[@BillyBolt57]

Okay I probs didn’t give that front pipe the best showing at erzberg 😂😂 but I promise it’s a lot more out the way.

[@dewimtbmoto]

Yes, I did chuckle as soon as you mentioned it.

[@slimrr4]

😂😂😂

[@LawrenceRoberts-k9f]

Would you run a pipe guard in the future?

[@dougandtheboys6411]

And then reality set in. You killed Bill. keep up all the good work.

[@Madtigertv]

hahaha First thing that came to mind lol

[@solar13251]

the front pipe not smashing did not end well🤣

[@singletrackassassin]

You beat me to it! Haha

[@chipper442]

Stan is the MAN, he’s a top tech for sure. You are lucky to have him Billy.

[@bazwax77]

Did so well with a broken front brake and an absolutely squished front pipe…..well done Uncle Bill dog ⚡️🔥💪🏻

[@chadrides914]

Favorite rider. A true enthusiasts rider. Shares info that real world riders care about. All the best to ya Billy !!!

[@markcardwell]

Don’t worry about the engine technicalities that’s what we have Tommy for

[@joshuaman1126]

The pipe 😂 flattened that bad boy out….. you rode great Billy 👍🏼

[@Ian-je9cf]

wish you did a video on how beat up the bike is after the race and what needs replacing etc love the content tho i like the servicing maintenance details too involve your mechanic more instead of just headlocking him lololol

[@StanDale-p1f]

Keep being yourself Billy love your work mate

[@rhysbutcher681]

Interested to know the front and rear sprocket sizes

[@stevenb0508]

Did you manage to get the answer?

[@zviki93]

@@stevenb0508i would like to now the same ? Originally is 13/45 on my bike..in this video I have seen rear one is 49.

[@stevenb0508]

@@zviki93merci pour l information. Oui je suis en 13/45. Je pense passer en 13/47. Le 49 me semble trop court pour rester polyvalent.

[@littlefarmer_32]

Sharp looking Husqvarna,, I ride a 2020 300 fi. I need to bolt up the grab handle, over the back fender/ seat. Great riding out there, keep on sending it to the finish line, now that the creeks are frozen in North Central Alberta, time to stud up the tires. Have fun

[@BhysReal]

Standard flywheel or heavier?

[@01camarosspower]

Where is the oil tank fill? On the 24 we have in our showroom it is still oil injected with TBI. The TX300 we have is premix, so what is your bike?

[@motorsnutts6594]

Ta for the show round the new wip , nice work on getting the exhaust tucked in even more than husky intended 😂, do you think it was the difference between winning and 2nd ? You both looked on your game ,appreciate your effort mate , Gurrr on !!

[@grutzmac]

How much sag do you shoot for on the fork? 30mm sag on the rear only? Or, talking about static sag?

[@lukaofthshire]

🙋🏼‍♂️ I have a question @BillyBolt57, you've mentioned in other videos about the handle bars you use, and just explained some of your reasoning for the 20mm higher seat which was great. Could you explain how you know what bar postition you need ? Or better still maybe do a video explaining to us basic folk how to set up a bike for the right rider "triangle"/position. Watched a load of your videos recently, great content. I didn't know skipping the adds was a problem, I still skip them but now when I go out I put your channel on for the dog instead of the radio, she watches the ads for us both. So while I'm making requests if you could throw in the odd "good girl" to your vlogs it'll keep her from skipping the ads too 👌🏻

[@HoagesMoto]

Love the comments on the higher/tucked in expansion chamber, bet you had a laugh in the edit given the event's carnage, GOLD hahaha

[@zachfarkash6430]

Bill you do have one of the best looking bikes in the paddock? Good job at the race man. It was awesome to see you out there turn it up. Good luck in the rest of the season.

[@sylvainbillangeon]

Hi Billy. thank you for that, I always appreciate bike check videos, it's great ! big congratulations for P2 at the race, it's really amazing ! When you were 1st for a long time, I really belived you would catch the win , but finally... It will be for next year ! keep going on and take the crown at the end of the championship !!! GU ON !

[@russphillips3732]

Hard enduro gearing and prologue gearing. Or transmission if it isn’t stock

[@dogfish180]

Famous last words about smashing the front pipe 😝

[@HuntertheHoleshotKing]

what size sprockets are you using

[@SPCxRecon]

Would love to know where your forks sit on the clamps, flush? or a little bit lower? and the clicker settings.

[@R.B_B]

Nice bike! In competition, what are the average hours of use that this engine needs a top end and a full rebuild?

[@brendonsweeney4162]

Great clip, really enjoy the content…quick observation; why do you use the Brenbo brakes and clutch when the stock bikes uses Braketec? Is there any noticeable performance difference?? Cheers

[@ticklefritz5406]

Thanks, man! That is such a sweet bike.

[@mikeduncan1702]

I hope we get to see RoxyCam at Silver Kings! 🤩

[@davidbuzaki2511]

Hi Bill, What’s the go to gearing on the new 24 bikes for hard enduro? Example the TPI was 12 48. Thanks Dave.

[@heyman8820]

Thanks Dave

[@MidtownRich]

PLEASE tell us where to get the nylon webbing strap on the back of your seat. The new bike design is very hard to lift with the airbox holes. That strap is KEY! Where does it bolt to? Who makes it? Somebody post a link please if you know about any strap for the rear of the new chassis. Thanks!

[@will.134]

How come you used the standard Silencer of the fmf for the race ? Was it down to engine engine characteristics ? More/less top end or more torque etc.

[@lukereds733]

He runs the black fmf silences in racers i have seen and no fmf front pipe

[@will.134]

@@lukereds733I'm pretty sure it's a standard silencer with a fmf sticker on

[@madMX96]

I knew its higher seat when he raced Serbia. I wish Sherco offered high not just low option, need to get aftermarket foam and cover.

[@lukefish7562]

⚡️BB57⚡️ It’s a nice one for sure! Had some issues with my 22 te300i Rockstar edition lately and definitely wish I had a tbi instead of my tpi. It’s the only reason I’ll upgrade one day. Keep tearing it up buddy! 💪🏽🏍️💨

[@enduroantics2914]

Undersized and drilled mousse for hard enduro? And how many rim locks?

[@tnhnkvnc]

What should be the most suitable gear selection for Husqvarna TE250 2024?

[@garretthorner]

Wes all love a good ol bike check thanks Bill dawg

[@TechEnduro]

Everyone wants to know GEARING

[@richiesupercharged]

Would like to see an after ezberg bike walk through to see the wear and tear of one race

[@russcattell955i]

Still waiting for Bill to play on a 70's trials bike, specially a Sherpa like I had, or any period rival !

[@endurok39pnw]

Sweet bike. Brembo, hahaha awesome. Maybe Husky should come out with a TE 300 factory edition kitted with Brembo instead of Braktek.

[@lucianoaugustob]

Will you post a race video ?

[@BUZZB8Z]

what gearing you liking with the new motor and trans? I see a 49 on the rear of this bike...

[@lukereds733]

It would be 12/49

[@Jobcat]

Are the new ‘24 TE300 suppose to have the oil port in the frame? I know they can be removed and mix your own gas but have 2 on order and wondering what stock comes with.

[@lostinpa-dadenduro7555]

It’s supposed to come with oil injection on the Enduro models. Cross country models do not have it.

[@Superdisco199]

4:20 Not a production 24 frame. Probably the 2025 frame with more flex (shock tower has cutouts).

[@jbmbt]

Dang Billdog, that was a good job you did there. 👍

[@janfabis5510]

why dont you have oil injection like in tpi and 24 factory bikes

[@rx2ride259]

Hey Bill, question for Stan. Looks like the oil pump has been deleted? Running premix in the gas at 60:1?

[@badcompany1313]

The new bikes are TBI instead of TPI which uses premix again! No more oil pumps. I’m not positive on the recommended premix but 60:1 seems a tad lean

[@lostcausesingletrack8015]

@Badcompany1313. That’s not true on the te. Only true on the tx. Looks like they have it deleted on this bike.

[@Skizm_admin]

Billy’s how do you combat arm pump?

[@sape74racingsp]

The 2024 TE 300i is just definitive the bike of the bike in the paddock !!! Cheers bro 😉

[@brenoagf]

Can you tell me the spec of the handlebar?

[@robsonenduro3316]

Two rimlocks or one on wheels?

[@sandbiker]

Great review, well done!

[@davepb5798]

Roxy does 'I'm a teapot' !

[@jayreynolds57]

THANK GOD THEY CHANGED THE SUBFRAME!

[@cacciatoremarco]

Love the looks of it and 3 months already i think you should give ot away to one of your fans😂

[@manugatzi6158]

Why Billy not using some rad guards like most of us do?

[@cm-oo1td]

How fast does it go mister 😮

[@johnnybirdman]

Definitely liking the look of these bikes more than the rockstar bikes

[@TheunodeBruin]

Did you race with the same engine you did the burnouts with in town? What apart from the tires did you change before the main race 😅

[@ldno3747]

2:30 Famous last words...

[@helderneves91]

Curious about "the button" above the tank, 👀

[@dominik.149]

such a sick bike

[@jaywilliams300xc4]

Do you still use a taller XC first gear in the gearbox like in your old extreme bike

[@mohammadrezaasefi8549]

Hi , you dont mind that husky motorcycles got heavy more than ktm , there is no struggle ?

[@Backhurtsbad]

So Billy only uses 30 or 40 mm out of the 300 mm available rear?? Loaded sag? What , I might have not understood properly?

[@nelsonvzaks9186]

I'm shocked how little these pro riders know about their engines considering the fact that it's the most important part of the entire bike, still can't forget Graham Jarvis forgetting his bike has a Kickstarter, nice bike Bill but that pipe😂so much for "it's outta the way more"

[@robsonenduro3316]

agreed, I'd like to know more technical details during bike check as we amateurs do everything by ourselves.

[@dougderby9454]

Indeed. Graham rides so any diff Te300’s though. Continent after continent with schools, tours and race events. 😊

[@Lee-fn6en]

A pro rider just has to ride what there given.

[@joshpodolsky7740]

I beg to differ, the engine is not even close to the most important part of modern bikes. I'd say suspension and chassis, you could take a 300 motor from 2008 and stick it in this 2024 and it would feel 95% as good I bet.

[@cfvgd]

For them suspension is the most important. Engine codes last

[@enduromxhumph____]

Cool video. The bike looks mint, not going to lie though, i threw up a bit when i saw the air pressure sensor😅😅😅. It looks like its in a much better place now though.

[@Motors4LifeOfficial]

whats your new gearing ratio sprockets?

[@matevzkosak6984]

2:25 foreshadowing

[@Gavin105h]

Can’t wait to see ya yo at silverkings!

[@LawrenceRoberts-k9f]

I guess your not allowed to mention the internals of the engine? Would be awesome to know what's inside a factory motor and how much it differs - Maybe one day!

[@VikVik-je8go]

how is processed the lubrification of the engine??? thanks for your videos

[@OtisFlint]

His is premix. The production model is oil injected.

[@БагдадРамазанов]

what is the front sprocket

[@brunostudley2191]

Billy your a tease with them loose shorts on!!😂😂🤣😛

[@_magarbishal30]

where can we buy this bike i really love this bike.

[@tylerwortman]

The 2024 models don’t have the triangular hole in the frame near the top of the shock absorber 1:53 Come on Billy, you’re on a 2027!

[@alangolightly9850]

Oil injected?

[@kurmannjoshua1]

So you present the bike with a fmf muffler but you run an oem one with fmf stickers in real, why is that?

[@michaelcupp7529]

where can i find a blue rear fender for a 24?

[@kolias89]

Anybody notices how mani and Billy run a special spacer on their front brake master to raise their handguard a bit higher thank stock? I’ve been looking for more info on this but no one seems to know the answer! Maybe a different bracket that can fit a spacer to lift it higher?

[@BillyBolt57]

It’s not for the hand guard it’s because it’s a different master cylinder. If anything the hand guard being higher is worse.

[@matthewblank214]

What i ride and ride it awesomely i do!

[@adamblundell6402]

I have a question. Where do flys go at night time?

[@ChrisBurns1119]

Do you ever get to keep any of the factory bikes? Or do they give you a personal bike?

[@malhunter7]

Is the Bike a TBI or TPI..........

[@1176hambone]

CAN WE BUY THE BILLY BOLT GRAPHICS PAckAGE?

[@endurodka]

Beauty😍

[@codyhuery]

Why no rad guards or braces?

[@dasheildelfs5818]

Does anyone know the exact front tire that is? I know it’s Michelin, but what one

[@virjoghealexandru5072]

Enduro medium

[@chrisoffersen]

Would anyone but a professional rider notice a 20mm seat height difference?

[@ianparker3486]

Great video

[@propacollector3499]

are pistins still cheap and blow up

[@Gaj12345]

Hey @BillyBolt57 or anybody :) does anyone knows what is the point of having a additional on/off switch to kill the engine on the left side of a handlebar, even tho the kill swith (red button is next to another kill switch)? Looking to change the buttons on MY2024 because the new kill switch is utter crap. Thanks for replay

[@rideordivekerry4830]

Good shit

[@docdune]

New pipe wasn't high enough for Carl's Dinner eh Billy?

[@Nico3dd]

2:27 "very impresive how little you'll smash your pipe with this new bike" 😂😂😂 well we all know how that turned out 😅😅

[@stevenlitvinchyk]

2025s will be out next week!

[@KXCvin-W]

Wait Brembos are on the 2024 models???

[@jarrod1687]

No, only the grey pro model

[@lexxreyes1632]

Because the 2024 motorcycle of the pros does not have an oil tank

[@kirkbailey3552]

Question... Why don't most of you in Hard Enduro use full wrap around hand guards?

[@BlueDreamtoken]

i always wonder this as well mine have saved my grips and levers so many times. its one of the most important upgrade to me but i ride thought heavily wooded areas

[@nseric1233]

I’ve asked other pros that too. The downside to barkbusters are the handle bars don’t flex the same and there’s a tiny chance you could get your hand stuck in them when crashing. With the aluminum throttle tube and spare levers you don’t really need them. I have them on my bikes but crash a lot lol.

[@woodysrockspyro6436]

Flags don't stick our as much and don't get caught on trees... I'm gonna have to get waaaaay better before I give up my wrap arounds though.

[@TheRaind33r]

Because pro rider, not weekend warrior.

[@BlueDreamtoken]

@@nseric1233 i crash alot 2 lol i put teflone tape on everything on the handle bars so it spins when i wreck its worked out well for me never thought about my arm getting stuck thated ruin your day.

[@stevekirk6399]

how much?

[@robertchester1596]

Show the bike after Erzberg