BIM - Revit Adaptive Component 03A Geodesic Sphere l Dome Modeling

[@GuillermoElan]

Brilliant tutorial. I managed to do it. Thanks a lot Arnold! =)

[@NonStopLearning101]

Glad you liked it

[@TugasUly]

thanks, brilliant tutorial. how can i made it in revit 2024?

[@sharonrairai5479]

Great It took me 3 weeks to follow ur steps but I did it thanks so much now m looking for geodesic dome

[@NonStopLearning101]

Thanks, glad to hear that

[@robertnorris3036]

@9:27 after you have added 'position_zero' parameter to the 3 points, you zoom in and the step is missing. It took me a bit but in the properties of those points you changed the Graphics -> Show Reference Planes -> Always -> Apply

[@NonStopLearning101]

yes, you're correct. select the point and go to properties and in "Show Reference" dropdown, select Always. I only zoom in to select the point, you did not miss any step.

[@gabrielruvalcaba]

SUCH A GREAT JOB, CONGRATS!!!

[@NonStopLearning101]

Thanks for watching and comments Gabriel Ruvalcaba, ;)

[@zentagle6856]

I need your help SOS, @11:00 I can´t found the botton for to convert to Sphere Radius well

[@NonStopLearning101]

Let me check

[@TugasUly]

me too, when I loaded triangle4poins_2v into project geodesic_sphere, I failed to relace triangle4poins_1v to triangle4poins_2v my geodesic shape is so random

[@ॐTatSat]

Thank you very much for the tutorial. I managed to do everything okay in imperial measurements, yet on my 4V sphere, 1 panel has gaps that doesn't completely enclose the sphere. Do you want what may be wrong? My Sphere_radius is at 50'.

[@NonStopLearning101]

Thank you for watching!

[@jeanboyable]

If anyone one is having trouble loading the golden rectangle; go to create and select component a will show up. Good luck and again Non-Stop your a beats.

[@seylafelypadillagarcia2007]

Hello, such an excellent video, I wanted to know at minute @4:59 how you do to make that rectangle appear. I am interested in this modeling thank you, I will be waiting for your response

[@NonStopLearning101]

Which one?

[@seylafelypadillagarcia2007]

The rectangle that appears after you press Family 3. The one you do to intercalate the three rectangles at the same point

[@ayaomar5463]

9:39 when u made the 3 points , then made from normalized ... The position zero , there is no normalized ... In the properties panel how can I add it , my Revit version is 2019 Thanks in advance 😊

[@NonStopLearning101]

select first the point then you can select in the properties the normalized

[@acezferry]

thank you very much! is it possible to make the geodesic frequency 3 v with this process?

[@NonStopLearning101]

yes, off course

[@wangdanni9657]

hi, it's an amazing video, yet I have one problem when following it. When I moved to 3v, the surface was protruding inwardly, is there a way that i could flip it? Thank you very much

[@NonStopLearning101]

Yes, you can add the "Flip" icon. Thank you for watching

[@СтасФилимонов-б8я]

@9:40 how do you choose the right coordinate system? I can only choose the whole model coordinate system so I cant move the point along the reference line

[@NonStopLearning101]

try to select which direction of gizmo you want to move from X, Y, & Z.

[@Fushione]

5:21 I'm having trouble whenever I define the parameter "Positionzero" to 0, the 3 intertwanged plans don't go in the center of the sphere. So I have the two reference lines and the geometry at the end instead of having it in the meeting point of the lines. Do you have an idea of how I could fix that issue? Thanks !

[@NonStopLearning101]

thankz for watching. I will come back to you

[@jeanboyable]

attach a picture for solution; i'm studying this project and im find the solution if in case someone has an issue. Make sure to define everything at zero. Better explain with a pic

[@LizZeltser]

Thank you for the excellent tutorial. I feel that I don't understand completely the concept of how it works, but followed the steps and after few trials could create one. Do you have any suggestion on how make a 5V and 6V?

[@NonStopLearning101]

Glad it helped!, follow the same principle for 5V and 6V

[@juliannav6034]

Everything is working fine EXCEPT my shading is not working, which makes it very difficult to manage. Troubleshooting through the Revit website is not working, any ideas why this might be happening?

[@NonStopLearning101]

shading you can adjust in the revit interface below

[@orugamh]

do you have any tutorial for his type of dome using REVIT 2021?

[@NonStopLearning101]

Let me check using Revit 2021

[@franzcastellon3326]

I can't make a V3. I have problems with the center point. Thanks for the video.

[@NonStopLearning101]

Try again

[@Armen165]

sorry can you explane sqrt(4 * Sphere radius ^ 2 / (1 + Golden ratio ^ 2)) please

[@emanuelscheyola54]

en.wikipedia.org/wiki/Icosahedron Please, check this page, it's gonna help you!

[@ramonenrique751]

thanks for the video, good job. I could make the 3v dome

[@NonStopLearning101]

glad you liked it

[@serenasavi4089]

When I load the 2v adaptive into the 1v it doesn't look right. It looks way more distorted then it does in your video plus when I throw in the sphere radius parameter it only reduces the distortion to about half. Long story short it does not look like a dome. Am I doing something wrong? Please help.

[@NonStopLearning101]

Hi Serena, thankz for watching.! First, you have to double check the formula. Second, check the parameters, it should match your model. & Third, follow the step by step procedure in the video. Do it step by step and pause the video then so on..... good luck!

[@EvianPutra]

I was having the same problem like you, then I repeated it again and it works. The thing is you need to click delete formula on the prompt after you move the three points up.

[@beccaquesnel2806]

Same thing happens to me and I've done the tutorial at least 20 times

[@TugasUly]

@@beccaquesnel2806 did it work?

[@TugasUly]

@@EvianPutra when I loaded triangle4poins_2v into project geodesic_sphere, I failed to relace triangle4poins_1v to triangle4poins_2v my geodesic shape is so random

[@goblin0411]

any ideas for making openings on this form, like an entrance door?

[@NonStopLearning101]

You can, by unpinning panel and changed the unpinned panel into panel door

[@hollywheeler4147]

In step 2, when i try add the 4th reference point, I dont understand how you selected the right pane? whenever I add the sphere_radius offset it just takes the point way over t the right, and doesnt stay perpendicular! Please help, I am doing a dissertation on modelling geodesic domes

[@marquex3d]

hello , i have experiencie in model geodesic, visit my chanel

[@NonStopLearning101]

Thankz for watching. drop me an email and let see how can I help you.

[@jdkworld97]

very good video! It goes verrryyy fast, I would prefer a slower video. The information in the video is correct and complete, it is very valuable information for my project! Thanks a lot.

[@JK-Jasmine]

You can adjust the speed in youtube setting. The creator might want to shorten the time of video to attrack more audience seeking for quick learning

[@NonStopLearning101]

thanks for watching

[@zeeshansaqib9731]

Well for 3V dome dividing the 1V panel line at two points rather than middle (as for 2V dome) has worked out for me but the points do not align which i think is because of dividing the line at 0.333 and 0.666 is not accurate enough so i cant get a straight line at base in case of dome :( Any Help would be extremely appreciated. thanks

[@NonStopLearning101]

Try do adjust the dividing line. thankz for watching!

[@priteshanjikar5423]

sorry, does not understand well, can you share any reference..

[@den1seq]

Great thank u for understanding geodesic in revit!! Keep move on! Can not Load 1Vtriangle family in 2V - can't put in point 4 - it mark as not posible to insert in it((

[@NonStopLearning101]

Thankz for watching Денис Ямилов. Double check your constraints with your reference points and reference line and Family Types as well. good luck!

[@anasmuarrif7184]

thank you for the video. can you share the files please ?

[@NonStopLearning101]

Thank you for watching! let me dig my files

[@healthexpert9374]

I made everything. It turned out perfect except that the sphere got 4v panels which were slightly unaligned from each other. The surface lines aren't perfectly intersecting each other. What have i done wrong??

[@NonStopLearning101]

Thanks for watching again Bani, double the size or scale of your drawing, maybe its too big for the other panel

[@altabird44]

This video is difficult to follow and is missing steps. Reading the comments below helps.

[@NonStopLearning101]

thanks for watching

[@alinemotta4449]

How to make for 3V?

[@NonStopLearning101]

in which portion? thanks for watching

[@zeeshansaqib9731]

Many thanks for sharing such a great video, i followed it through successfully thanks to such a detailed spoon feeding lol. My question is how about 3V dome? Can it be done by dividing the 1v traingle sides by two points at 0.333? i tried but may b making some mistake. please help if possible and again many thanks.

[@NonStopLearning101]

I did not try yet. but maybe it will work.

[@JK-Jasmine]

I wonder if it would cause any gap when divided by 3 Since divided by 3 will lead to more results with infinite decimals.

[@sumeetnanarkar2029]

i cant make the 3 points adaptive

[@NonStopLearning101]

Thankz for watching Sumeet Nanarkar,.. ;) soon you will, just continue to practice, cheerz!

[@Mstzo.colombia]

Nice Job tanks !

[@NonStopLearning101]

Glad you liked it

[@Giiid-e6c]

Thank it very helpful

[@NonStopLearning101]

Glad you liked it

[@lazarorocha7880]

me gustaria que el video corriera mas lento....ya que esta muy rapido y algunas cosas no las alcanzo a ver claramente

[@nataliacortes4352]

Pongas en la velocidad x0,25

[@karolinazasada8883]

Thank You!

[@NonStopLearning101]

thankz for watching Karolina,,,

[@ladapanda]

maniac ;DDD

[@NonStopLearning101]

Thanks for watching

[@韓偉-g8j]

あか

[@NonStopLearning101]

Thank you for watching 😉

[@韓偉-g8j]

あ

[@NonStopLearning101]

Thank you for watching 😉

[@ridwanarifinarchitect]

dislike for the music lol

[@NonStopLearning101]

THankz for watching

[@priteshanjikar5423]

@9:57 after putting a radius, relative positions of 3 points are not coming as shown...is there any other settings??

[@NonStopLearning101]

try to repeat again, sometime the points are not properly placed

[@enzzogabrielc.tavares8255]

In 10:45, when i replace 1v with the 2v, all triangles look unconnected. I review and did step by step of the point placement, but still unconnect after all. What i'm doing wrong?

[@TugasUly]

have you found the solution? I'm also stuck at minute 10.45 , please reply to my text. that's very helpful. Thank You