BIM - Revit Adaptive Component 03B Geodesic Dome Steel l Fabric l Tent Structure

[@horaciosc76]

Felicidades, gran trabajo, impresionante dominio de revit y de la geometria, gran detalle, es muy ilustrativo tu video y nos deja ver todo lo que se puede alcanzar a lograr aplicando tu lema no pares de aprender, muchas gracias, saludos

[@NonStopLearning101]

Thanks for watching

[@curtblack686]

one of my favourite songs ever, Tom Misch - The Journey!

[@NonStopLearning101]

Thanks

[@jays_vids]

As useful as this is, you miss a vital part at 5:33 where it just cuts to a totally new family that hasn't been created previously. I've followed the first video successfully, but am unable to complete this due to that unknown family. You then go on to do the same thing at 5:55. It's an adaptive family with the rectangles loaded in?

[@NonStopLearning101]

Yes, you are correct. Thank you for watching!

[@estebandeogracia]

My respect to revit, am very excitet w this program!

[@NonStopLearning101]

Thanks for watching

[@healthexpert9374]

Hi I got stuck at 5:10. Please help me out. The form doesn't load properly into the structure. One of its three points comes twisted.

[@NonStopLearning101]

thankz for watching... try to double check the position & the properties

[@chiarac9240]

Hi guys, is there anyone willing to share the model? Me and my firends are working on an university project, but we're not very familiar with Revit. That would mean so much for us.

[@NonStopLearning101]

Thank you for watching!

[@ankitmaurya6408]

how to make pre loaded paremeters (small radius , mid radius ) for tent adaptive fabric

[@NonStopLearning101]

adjust the radiue parameters in the Properties

[@doppio7360]

J

[@sundiago2008]

Intense. ..a slow tutorial will be highly appreciated

[@NonStopLearning101]

well noted Mriganka Sonowal, thankz for watching! ;) If I may suggest to watch the previous video BIM - Revit Adaptive Component 01 Basic Modeling an Introduction. Tutorial for Beginners cheerz!

[@sundiago2008]

i understood BIM - Revit Adaptive Component 01 Basic Modeling an Introduction. ..i wanted to follow an intermediate video tutorial like this one. Can you send me the original rec of this video. ..it will be a great help :)

[@NonStopLearning101]

Mriganka Sonowal give me your email address, I will try to send it to you. ;)

[@sundiago2008]

[e-mail]

[@NonStopLearning101]

Hi bro, the file was already sent. ;)

[@ramiabyad927]

Hello and thank you very much for sharing. I was wondering if I had missed any step prior to get 2v frequency triangles switchable using the type selector. @ minute 12:25.

[@luisfelipevalerianoccacya9284]

I have the same problem, I would like the author to solve this question, but thanks for the video anyway

[@luisfelipevalerianoccacya9284]

Hi, awesome job, could you tell me how you separate the triangles from the tetrahedron to load the adaptive model?

[@NonStopLearning101]

Hi thanks for watching. you need to create separate family

[@dave77yeo]

Hi, I need help please... I have few duplicate (model) points but the orientation of the points are not all the same, some points were going up, but some points were going down... i see the orientation of the Z axis between those points are different. I have also tried to use flip, but it didnt work accordingly with my offset orientation issue. Please advice me, what is the thing to control the point orientation? how to solve this ? (timing : 02.19)

[@rafaelsoto8760]

Which template are you using at the beginning?

[@NonStopLearning101]

Metric Mass template under Family

[@leanhdung758]

I wonder where did you get the ingredients for step 2 from step 1?. looking forward to your answer thanks

[@NonStopLearning101]

Suggest to check the previous Video, it shown there. Thank you for watching!

[@charolle]

Thanks! What is the base archive for the 2 step?

[@NonStopLearning101]

What do you mean "archive"? Thank you for watching

[@tio3431]

You lost me at 3:49, where did that came from......would really appreciate a reply, great work. Traced it to the first video, but something was missing and I couldn't figure.

[@NonStopLearning101]

Thankz for watching Timothy Ogunwola....watch first the basic modeling...good luck!

[@healthexpert9374]

Same here. I made the whole 3A dome. Yet this one has incomplete instructions. Please help.

[@maaattisborgen]

Bani or Timothy, did anyone of you manage to solve this step? I also followed each step from the 3A dome and succeeded to 3:49 in this video where I got confused. Have been trying to work myself around the problem without success so far unfortunately...

[@seylafelypadillagarcia2007]

Hey, how about I have the same problem, I would like to know if they solved it, please help.

[@relnatoupratt]

Can i please get the original of the video even if i put it on the slowest is very hard for me to follow. thank you

[@NonStopLearning101]

Thankz for watching Rawan Elnatour,... ;) as mentioned on the previous comments, you can slow it down the video itself on you tube video setting.. ;)

[@SAM-ip7fr]

Thanks! What units are you using in each family in the 3 videos please?

[@leonardomarconmosconi7023]

Hello friend, I am having problems in the creation of the tent/fabric There are always two points that are "disoriented", I tried to delete them and create them again, but without success. Would there be any way I could make the tent file available? Or explain to me why this happens? It's always the big points of the tent that's failing.

[@NonStopLearning101]

thankz for watching, try to double check the constraint in the properties

[@desertpenguin]

I hope you guys complaining about the speed of the video realise that KZbin has a setting that allows you to slow videos down?

[@NonStopLearning101]

Thankz for watching desertpenguin...;) thankz for your positive comments! cheerz!

[@ionnyegre4976]

@@timothyj67 HAHA! Same here! This guy's on speed

[@luispaulinoochoa2508]

What template do you work with at the beginning of the video? Thank you

[@benedictionz]

Hallo, I use revit 2020. I've watched your video tutorial thoroughly. But I cant seem to make a circle reference radius parameter in 3d view like you do. I only can do it in plane view. Why is that?

[@NonStopLearning101]

glad to help, in which particular step?

[@davidhaddock4843]

this is a generic model adaptive family. click the gear wheel on the video and you can change the playback speed. you're welcome

[@NonStopLearning101]

Thanks

[@tomasoconnor6456]

Very informative what I could manage to grasp. Is there a reason for putting it so fast? Does it cost you money? If not I'm sure people will manage to sit through an extra 10 minutes or so of excellent tutoring. Keep it up! The tutoring, not the speed!! If there is an original where do we go for it, I don't want to put email details up. Thanks.

[@NonStopLearning101]

Thankz for watching Tomas O'Connor....;)

[@MrHydyr]

It's accelerated because otherwise the video would get too long and boring. If you want, you can play it at speed of x0.25 and enjoy!

[@sumeetnanarkar2029]

sir when i select the 3 points i dont get the option of adaptive component pls help

[@NonStopLearning101]

Hi Sumeet, first you should open or create new Family - then choose Generic model Adaptive - In this workspace when you add Reference Points, SELECT them to show the option for "Make Adaptive" in the Modify ribbon. Or in the Properties, scroll down to see Adaptive Component, under "Point" - change from Reference Point to "Place Point (Adaptive). Good Luck!

[@TreDogOfficial]

nice, can you show how to make a simple Geodesic Dome. I wanna build a greenhouse but I wanna make it on sketchup or AutoCAD first

[@NonStopLearning101]

Thankz for watching Trevor Doge, you can watch my previous video on how to build basic Geodesic Dome, "BIM - Revit Adaptive Component 03A Geodesic Sphere l Dome Modeling"

[@nilsenjantriumfante5492]

0:55 i don"t have the parameters

[@nilsenjantriumfante5492]

can you help me with this? thank you

[@NonStopLearning101]

sure,what exactly?

[@aqibhabib7696]

plz upload in slow motion its much fast c,nt understand. its much use full tutorial.

[@NonStopLearning101]

Thankz for watching. you can use the Slow Motion in the "Setting" button.

[@ИльдарМ-л4ъ]

Здравствуйте. Высокая скорость, тяжело уследить за ходом действий. С нормальной скоростью можно выложить или ссылку дать?

[@NonStopLearning101]

Thanks for watching

[@Hope-in6bk]

Why the tent edges are not perfectly aligned ? they are overlapping each other, you just fake parametrizing them.

[@NonStopLearning101]

Thank you for watching!

[@yomnabahaa6404]

even after i i slowed it down to .5 it stills soo fast

[@NonStopLearning101]

Apologies, thanks for watching

[@MrMinebase]

What is this music!?!?

[@NonStopLearning101]

It was only a free youtube music

[@fisayoadegoke2887]

BLOODY HELL. I thought i had conquered revit

[@NonStopLearning101]

Thankz for watching

[@healthexpert9374]

you didnt show how to make the model at 3:55

[@NonStopLearning101]

Thanks for watching Bani, try to watchh the previous videos

[@tommccarrick18]

Why run the video so fast?

[@NonStopLearning101]

You can slow down on "Setting" Playback Speed

[@wilarao]

Nice tutotrial. Do you have a little bit slow of the vid?

[@NonStopLearning101]

Thankz for watching Poi Arao....;) there is an option on youtube to slow it down....

[@oliverhachem8112]

Hello, if it’s not too much to ask can you upload ur end product so we can download it, thank you.. and great job what you did is amazing

[@NonStopLearning101]

thankz for watching Oliver...I will try

[@وسامعلي-ت8ح]

why speed ??????????????????????????????????????????????????????????????????????????????????????????????????????

[@NonStopLearning101]

Thanks for watching

[@syedatiqabbas5036]

sir plz slow mostly are student to learn u behave a master level program and with voice is better than ur speed sir

[@NonStopLearning101]

thanks for watching Syed...

[@hashimkhan613]

SSSUUUUPPPPPEEEERRRRR: But plz give the lectur very slow:

[@NonStopLearning101]

Thankz for watching Hashim Khan....;)

[@dainguyen8002]

too great

[@NonStopLearning101]

Thankz for watching dai nguyen..... ;)

[@ErwinMeulman]

Upgrade to AutoCAD, you will love it.

[@NonStopLearning101]

Thankz for watching Erwin Meulman, cheerz!

[@xavierdiaz9536]

LOL. love the sarcasam

[@InterArchi]

WHY SO FAST ?? THANKS ANYWAY

[@NonStopLearning101]

Thankz for watching InterArchi...;;;)

[@JustineHaupt]

Obnoxious music.

[@NonStopLearning101]

my apologies on the music

[@syedatiqabbas5036]

Oh my God sir plz slow chakkar aa gaee sir

[@NonStopLearning101]

thanks for watching Syed...

[@fuat0007]

please, slow of this video, thank you,

[@NonStopLearning101]

Thanks for watching Fuat

[@frederickhouze1485]

beaucoup trop rapide! Aucune utilité à cette vitesse…..dommage

[@NonStopLearning101]

Thanks for watching

[@arch_m99]

لخاطر الله متكلي منو طاير وراك

[@NonStopLearning101]

Thanks for watching!

[@q-pidindigo5629]

That music is the most dreadful and annoying. Could you have picked a worse sound track?

[@NonStopLearning101]

Apologies for the sound, music was copyrighted and replaced by KZbin available music

[@zhangandersson]

Great content, but truly terrible and stressfull music

[@NonStopLearning101]

Apologies for the music. Thanks for watching!

[@melihsanac6658]

PLEASEEEEEEEEEEEE

[@busracaglar2819]

the video is moving very fast. It is not clear what you are doing. You haven't given any explanation yet. It has no educational value.

[@NonStopLearning101]

Thank you for watching 😉

[@mdrodassa3784]

horribly fast wtf

[@NonStopLearning101]

Thank you for watching

[@melihsanac6658]

Dosyasını atabilir misiniz? [e-mail]

[@NonStopLearning101]

Thanks for watching Melih

[@melihsanac6658]

sir can i get a copy as well?. here's my email address [e-mail] thankyou so much! your videos are really good! PLEASE :)

[@Mandrew56]

not useful at all. Too fast.

[@NonStopLearning101]

Thank you for watching

[@Vechniy_Kayf]

..конструктивно - это какой-то бред

[@NonStopLearning101]

Thanks for watching!