Bind the Flylens 75/85 to your radio the first time! | Pocket ELRS | BetaFlight passthrough |Flywoo

[@DiamondfaceBoda]

I cannot get the tx12 mk2 to bind to the fly woo 75 with dji o3 unit it’s popping up on tab and also it was somehow connected before plugging into beta flight because when I unplugged drone it said telemetry lost so I know it was somehow binded atleast for a second before it tried the elrs configurator. Second question is when I get to end I don’t have com1 or any com option please reach our if you can I can video call as well

[@iFLYXWings6589]

1. For RC connection, if you hear the tone telemetry loss, it means it has been connected, try turning on off model matching to see if it fixes the issue 2. Sorry don’t fully understand your question. If you have more questions, please reach out via IG

[@SOKOL60A]

Пока "не приехала" FPV система можно полетать на таком чуде. Передатчик Micro AIO Camera A3/A3-OSD/BS2-OSD Mini 5,8 Ghz FPV. АллиЭкспресс. Установив на свободное место. За одно и потренироваться как аппарат ведет себя в полете. Попробовать настроить ELRS через "присеты" - не эксперементировали??)) { Чтобы число взлетов = числу посадок. } Until the FPV system arrives, you can fly such a miracle. Transmitter Micro AIO Camera A3/A3-OSD/BS2-OSD Mini 5.8 Ghz FPV. AlliExpress. Installing it in a free place. For one thing, practice how the device behaves in flight. Try to configure ELRS through “presets” - have you experimented??)) { So that the number of takeoffs = the number of landings. }😜😜

[@rabindrashair5971]

Hi, thanks for your video, it really helps but i have a few questions. i just received my flywoo flylens 85. once i have bound it to my radiomaster boxer, the throttle is super sensitive and just takes off. when i put in some alieron/yaw, it is also too sensitive. how do i reduce the sensitivity? secondly, when i reduce the throttle, it just drops very quickly as if the throttle is an on/off switch rather than linear which i think relates to the sensitivity from the the question above. for example, i just move the throttle stick a little and it just takes off. this is the same with the rudder input, the aileron/yaw stick; any small movement and it just goes off in that direction. its near impossible to control. thirdly, when i bind it to my radiomaster, can i pick a blank model (not the FPV model) and bind it to my flywoo flylens 85? OR must i pick the FPV model? reason is i have another drone set up on that. any help is appreciated. thanks!!!

[@iFLYXWings6589]

Not sure if you still need help, i understand your question but it will be hard to explain everything at once. If help is still needed my suggestion is for you to contact me separately on IG

[@soky157]

Thank you for the vid. I have had this Flylens 85 Analog for 2 months and still even after following your tutorial cannot get it to Arm.

[@soky157]

I had the Channel map wrong, changed it and now ARMS for first time!!! Only prob is as soon as I give the throttle a little movement the quad flips over. Please help.

[@iFLYXWings6589]

This is called a runaway Here is a detailed video as of how to fix it Build a 5" FPV Drone Part 4: Cause of Runaway and fixes #drone #fpv #betaflight kzbin.info/www/bejne/sKW5lKV_lNOki68

[@busyswizzler]

@@soky157 can you explain this, my 75 wont arm

[@SuksesSmart]

How do you set the binding phrase on the Pocket?

[@iFLYXWings6589]

How to setup binding phrase for most ELRS Radios that run EdgeTX/OpenTX? kzbin.info/www/bejne/gJrcZmSNj9mCqLs

[@LuckyPratama71]

mine doesnt work like this. my flywoo flylens still cant bind to my tx (elrs 2.4)

[@iFLYXWings6589]

Sorry to hear this, if you still need more help, please provide more details of which part you are stuck

[@CarlosFreire]

I have to get a whole fpv team for this crossfire version drone along with tbs tango 2 pro, what program do you recommend I use to bind it? Nice video!

[@iFLYXWings6589]

What program are you talking about? Thanks 🙏

[@CarlosFreire]

@@iFLYXWings6589 I have a tango 2 pro and as expected I use crossfire. Today the flylens 75 arrived and betaflight does not recognize the drone, which it does when I connect the flywoo LR4. I'm new, I've been doing this for 2 days and I'm asking for help because I'm frustrated, I can't link my two drones and I haven't even turned on the Google DJI 2. But I know that little by little I'll get there... if you know, any help is welcome. .