Bind the Meteor 65/75 Pro ELRS with Radio the first time

[@JohnK-ii1ps]

I finally connected my tx to configurator via wifi and entered a bindphrase. I was able to bind. Like your videos.

[@iFLYXWings6589]

Glad I could help

[@Jameswilliam-v6m]

Thanks! this is exactly what i need!

[@iFLYXWings6589]

Glad it helps

[@CompuTechoo7]

Thanks! Needed this

[@iFLYXWings6589]

Glad it helps!

[@cedricmoradel4492]

Very good job!!! Thanks you !!

[@iFLYXWings6589]

Glad this helps !

[@mysterb_33-13]

Very informative, but HOLY HELL!!! This is nuts! All this just to bind a woop?! There has to be an easier way?

[@iFLYXWings6589]

I understand your pain, the main reason why ELRS is not straight forward is due to it is a free project provided by a group of people working for free, so it is fair that we spend a little more time for free products.

[@mysterb_33-13]

@iFLYXWings6589 I appreciate the work put in. But, after hours of mucking about, I still had to downgrade to a different fw to get it to bind, and have stick input. Now, after all of that, it still won't arm. Very frustrating. I sat it to the side and will try again when I have time

[@aidanmeyer2240]

when i go to elrs configurator my target is diy devices 2.4 gh and device is DIY Mini ESP32 SX1280 2.4GHz TX, is this the correct one to use for my meteor 75 pro?

[@iFLYXWings6589]

Your target for a receiver should never be TX but RX, suggested to connect to WiFi first to check the correct target

[@aidanmeyer2240]

my correct target is DIY_2400_RX_ESP8285_SX1280 but when using expresslrs configurator it only gives me the option to choose the mini tx target, theres no other diy device catergory to choose from@@iFLYXWings6589

[@TheCivildecay]

use generic isntead of DIY tab

[@Renzo_FN_YT1]

Hey I know this is probably not going to be answered but I have a problem I’m using the literadio 2 se frsky d8 and it won’t bind, I tried the 3 plug method and still won’t bind

[@iFLYXWings6589]

This method only works for ELRS. Frsky radios will not work with ELRS drones

[@Renzo_FN_YT1]

@@iFLYXWings6589 thxx

[@Monkey_D_Cluffy]

Gl with the camera lasting lol. 3 cameras have died on light crashes where an element is just showing the frame in the sensor while flying. Otherwise the damn thing flew great! After the last camera death I converted it to a 75mm frame and 40mm bi blades.

[@iFLYXWings6589]

I cannot agree more that BetaFPV VTX and camera are super weak, they break easily like nothing and is costly to replace. They do have some quality control issue compare to other manufactures. I am constantly fixing BetaFPV products, just look at my channel and you will see..LOL 🤣🤣🤣🤣

[@Monkey_D_Cluffy]

@@iFLYXWings6589 yep! Lol 3 cameras, 1 aio and like 5 frames and a motor 🤣. But I honestly not sure I like my mobula 7 either lol. Broke the elrs antenna already doing IGOW week 3 lol. But the meteor frame just feels like it flies better than the mobula. Maybe I’m just over being careful with the meteor 😆

[@iFLYXWings6589]

@@Monkey_D_Cluffy Lost my first Meteor cam doing week 5, had to complete it using the mobula. Just a small tab and gone~ LOL

[@MonsterApfel5]

God send me an angel Thanks man ♥♥♥

[@iFLYXWings6589]

Hi Can you describe in detail what drone and radio do you have ? And what steps have you done so far?

[@iFLYXWings6589]

So I guess you got it? 😂

[@MonsterApfel5]

@@iFLYXWings6589 yes man the binding to the drone worked thanks. But my skyzone cobra x v2 shows no image , may you have any ideas?

[@flo20002]

i have now bindet it but its allways realy hot should it be like that?

[@iFLYXWings6589]

The VTX Will get hot if there is no air flow, obviously you do not want to be in this state for too long but it is completely normal

[@flo20002]

thanks for awnsering

[@drako07_Arts]

So, im newt into that fpv drone thing and i have a question. You said that there need to be airflow so the drone wont burn. How sirious is this ? I mean, is it like that with all drones in this price ? Also woupd be gratefull if you could recommend a drone for beginner. A friend recommended a drone from meteor series amd the tx12 radio with either eachine 800d or fatshark recon hd googles. Up to if i would want to go analog or digital.

[@iFLYXWings6589]

When leaving the drone idle The thing that is going to heat up the most is your VTX, you want to have air flow to cool it down. Its not actually going to “burn” but more like fried due to high heat. For beginners quads,based on your setup I will suggest to start with micros, Mobula 7 will be a good choice

[@jakeyfpv]

Okay so I found esp8285 and it’s under generic 2.4ghz my problem is I got to bind to my Zorro but I can’t get any movements out of the drone. Both on 3.0.1. Also anyone else have an issue with PC WiFi dropping out as soon as you connect the Rx? And I can’t access the Rx cause no WiFi? My Darwin was not like this wtf pls help Update: I got it to bind on 3.3 had to do it through beta flight passthrough. MAKE SURE everything is lined up with beta flight before you try and bind with passthrough

[@iFLYXWings6589]

Sorry, had too many message but Glad you have resolve the issue

[@italianpizzasecrets4761]

I can't manage to have my meteor75 to properly bind. I get binding on my ELRS radio tx but I don't see any movement of sticks reflected in Betaflight :( I am getting crazy. Any help?

[@iFLYXWings6589]

Check : If you have your models matching turned on, turn it on off to see if it fixed the problem

[@italianpizzasecrets4761]

@@iFLYXWings6589 thanks a lot for sucha fast reply. No, I don't use model match

[@iFLYXWings6589]

@@italianpizzasecrets4761 understood, but it does not hurt to try trun it on and off to see if it fix the problem. BTW you are mentioning it was bounded to your zorro. When you unplug the quad, does it say telemetry loss? If not, it is not bounded

[@italianpizzasecrets4761]

@@iFLYXWings6589 yes, I get telemetry lost. It is very weird to be honest

[@iFLYXWings6589]

@@italianpizzasecrets4761have you try to turn on and off model matching ?

[@aydenlopez8411]

how would i know the binding phrase for my radio? (betafpv liteRadio 3 pro)

[@iFLYXWings6589]

The Lite radio is a bit different, but I think this video explains it well kzbin.info/www/bejne/aaPHp6mbYqqWq8Usi=TlDR81KjMsFm2bw1

[@puc19]

Hi for some reason when I connect to Wi-Fi it gives me an update page, do you know why this happens and how to fix? Also it isn’t showing the right option in expresses configurator.

[@iFLYXWings6589]

Hi can you please email me the screen shots you are seeing ?

[@puc19]

Sorry for responding so late I fixed it

[@titustalks6499]

@@puc19how

[@JohnK-ii1ps]

I have a meteor 75 pro with a radiomaster zorro with an elrs nano module. I have tried everything to bind. Had to use the 15.1 configuator for the rx. I put in a bindphrase. Now i cannot put a bindphrase in the tx using any version of the configurator. I get an error message wth version 15.1 and just a bin file with the newest version. i got the zorro 4 in 1 to use with my other planes helis and quads but this elrs is the most frustrating by far. P.S. I did try the 3 plug in method too.

[@iFLYXWings6589]

Not sure if you have resolve the issue yet, if the problem persists please email me more detail

[@Boblebe]

hi, I followed your guide but the configurator only creates the firmwear.bin file for me. How do I also get the DIY_2400_RX_ESP8285_SX1280-3.2.0 file? other thing, the configurator in the taget option gives me DIY Mini ESP32 SX1280 2.4GHz TX which is different from what appears to you.

[@iFLYXWings6589]

The correct file should be under DIY 2400 ESP8285_SX1280. Double check your ELRS configurator and make sure it is not the beta version.

[@roman.koliada]

I have the same issue: there is no such device under DIY 2.4 GHz category for some strange reason. Have you managed to fix this?

[@CocoaMelon99]

@@roman.koliada what worked for me was not using the latest version of ELRS configurator and downloading version 1.5.10. Let me know if this works!

[@roman.koliada]

@@CocoaMelon99 Thanks, downgrading worked for me too

[@italianpizzasecrets4761]

With latest version of ExpressELRS configurator they moved the target under the "generic 2400...". You will not find it anymore under DYI. However I also downgraded the configurator following the workaround in this comments.

[@ВолодимирСахаревич]

Hi Is there any particular reason why you couldn't build firmware and flash it in one go instead of connecting to wifi twice? Kudos for this helpful demo

[@iFLYXWings6589]

Well, if you want to flash the ELRS receiver firmware directly with the ELRS configurator, you will need to connected the ELRS receiver to your computer for the firmware to have a target to flash to. However, the ELRS receiver is normally does not have direct plug for PC connection. So if you want to flash it directly in one go, you will have to flash it via betaflight passthrough, which datas are transferred from your FC to the RX. This is not that easy as it often fails. Flashing the RX via Wifi is still the current easiest method IMO

[@cameron9933]

How do I setup a binding phrase for my radio

[@iFLYXWings6589]

Here you go kzbin.info/www/bejne/gJrcZmSNj9mCqLssi=0sSwxRGUODuryYvr

[@buzzy_fpv]

Is this why i cant bind to my tx12? Im selecting betafpv 2.4rx in elrs configurator?

[@buzzy_fpv]

I've been on discord and emailing betafpv for 2 weeks now trying to get it to bind or get a replacement. I'll have to try flashing DIY

[@iFLYXWings6589]

There are a few reason of why your ELRS cannot bind, firmware version and flashing targets and bind phrase….etc For detail explanation, please look at the video below SPI & Serial based ELRS receivers explained#elrs #expresslrs kzbin.info/www/bejne/a4m7qWeAnM9kr6M

[@buzzy_fpv]

@iFLYXWings6589 so following this video I was able to bind sticks and switches respond in the receiver tab on betaflight but the quad won't arm on a lipo. Flag says calibrating msp so I calibrate accelerometer but the flag doesn't go away. I'm stuck with what to do

[@iFLYXWings6589]

@@buzzy_fpv Have your tried to reload the quad to original CLI?

[@buzzy_fpv]

@@iFLYXWings6589 I have not

[@SKI_FPV]

Or I can plug and unplug battery 3 times to set to binding mode with no binding phrase pre-set radio. I am correct?

[@SKI_FPV]

Sorry I talk too much 😂😂

[@iFLYXWings6589]

I never tried it for this particular model but assume it will work? You can give it a try. Using the binding phase is still the recommended way to bind based on ELRS 😆

[@iFLYXWings6589]

No worries Your fine

[@SKI_FPV]

@@iFLYXWings6589 So will bind in the first time when I do that?

[@SKI_FPV]

@@iFLYXWings6589 with Lite radio 3

[@steffeneggers4266]

When i start the configurator, there is no ESP8285 SX1280. What can i do when i can´t find the target? is there a way to download missing devices?

[@steffeneggers4266]

Well i found it: i downloaded a pre-release of ExpressLRS Configurator... The official release has got all the devices.

[@iFLYXWings6589]

Great! Assume the problem has been resolved ?

[@zacharysmith9743]

I'm having the same problem. Where did you get the version that had more targets

[@iFLYXWings6589]

@@zacharysmith9743 Here you go github.com/ExpressLRS/ExpressLRS-Configurator/releases

[@steffeneggers4266]

check, that there is no orange "pre-Release" box next to the version name. Just get the one with a green "lastest" box.

[@cesardelaossagarcia3352]

Donde puedo descargar el ExpressLRS UI?

[@iFLYXWings6589]

If you meant the ELRS configurator, the link is at below. scroll to "asset" github.com/ExpressLRS/ExpressLRS-Configurator/releases

[@hassanboyce5567]

I only get the firmware bin is there any reason for that?

[@iFLYXWings6589]

All the setting at ELRS configurator correct?

[@hassanboyce5567]

@@iFLYXWings6589 hey! Yeah they were all recommending using the diy 2.4 but it would always say “not enough space” error when flashing it. Thankfully! I tried what I thought was right for the firmware and it gave me the whole mismatch thing but it worked! Thank you so much for your response !!

[@gabrielelembo3975]

hi the proces is the same with the meteor75 pro?

[@iFLYXWings6589]

Yes 👍 the are using the same board

[@s.a.i.z.e.r]

Яка прошивка має буди на TX12?

[@iFLYXWings6589]

ExpressLRS LUA script + firmware version 3.x

[@rayb241]

It looks like the diy receiver's are no longer on the configurator only tx

[@iFLYXWings6589]

Yes, if you downloaded the newest ELRS configurator, the older DIY is consolidated into something else

[@derecktaitt8457]

What is the process for binding and fimeware update for the new versions of elrs could you be able to do a new video thank you

[@dannyslag]

@@iFLYXWings6589 Do you know what it's consolidated into? I'm trying to figure out what target to use and I'm also not seeing the DIY option from the video.

[@iFLYXWings6589]

@@dannyslag You can try BetaFPV Nano 2400 RX

[@danielgarnica8202]

what if i dont have a wifi receiver in my computer? :c

[@iFLYXWings6589]

My suggestion will be getting one of those USB WiFi adapter they are super cheap!

[@danielgarnica8202]

Thank you so much for the tip! I have already configured my Meteor 75 Pro, but I broke my frame in the exact same place as yours. What did you use to repair it?@@iFLYXWings6589

[@yevs6304]

have you one in your phone?🐵

[@nyclassic4ever130]

Did everything the same except I got update failed tried it three more times same thing!

[@iFLYXWings6589]

If you are keep getting this error, you might need to run it through betafight pass through

[@vidademikey9790]

Or you could just bind it by plugging it to your radio 3 times? Why all the extra steps? Crazy.

[@iFLYXWings6589]

Well, when you know how bind phrase works, it is much better

[@HumBirdBell]

Plugging in out 3 times …isn’t that crazy ??

[@Kahweekah2o2f]

I burnt mine!!😮 now what? It’s only an hour old

[@iFLYXWings6589]

Well… firstly sorry to hear that… if you think you accidentally fried it, I will suggest contacting the manufacturer to see if there are any quick fix’s, or please describe more of what issue you are having

[@taylorowen7558]

no one should have to do all this to get a tiny whoop to bind to transmitter!!!!!! I followed steps and targets are all diff.... F ELRS

[@iFLYXWings6589]

Well….let’s hope it changes in the future ~

[@buzzy_fpv]

Hey man, I messaged you on insta to send a video of what I have going on. Said message has to be excepted before I can send you the video. Thanks in advance

[@iFLYXWings6589]

Sorry, i am not monitoring Instagram closely, but just respond to you