Focusing knob disassembly, assembly and tightening step-by-step, design issues discussed.
Пікірлер: 59
@markharmon49633 жыл бұрын
I was making a mess of it until you explained the GLUE was freezing the main axis cap bolt. A suggestion is to use an appropriately sized screw/bolt extractor in the little center hole. Tap it into that center hole and GENTLY turn it out of the axis bolt with a wrench. Thank you for giving me the confidence to put a little strength into it. I was sure there was a hidden pin some where that was locking the cap bolt in place, and your video showed me I was wrong. Thank you so much!
@Szinbad Жыл бұрын
Very Nice Job. Great work with the close up photography and I really appreciated your direct commentary. Well Done!
@theoverengineer Жыл бұрын
Thank you very much!
@deejieweejie8153 жыл бұрын
Nice close-ups. Good video. Thanks
@StOKRATzoom2 жыл бұрын
Servicing Repair of binoculars kzbin.info
@etinarcadiaego32966 жыл бұрын
Great job!
@sabihamostafa43695 жыл бұрын
Thanks for the video
@AsgarAli-nn7bg6 жыл бұрын
Thank for the video
@zuzanaberankova128311 ай бұрын
The product has ease of use. Well made product
@VirantRoss5 жыл бұрын
Thanks for the video im going to give this a try on ours they fell into a whole in the middle of 5straight weeks of rain & flood.
@theoverengineer5 жыл бұрын
Thanks for watching. Sorry to hear about your troubles, where is it flooding? (We just had 5 weeks of forest fires, extreme drought in the Pacific Northwest)
@VirantRoss5 жыл бұрын
theoverengineer i have taken it apart just like you showed in the video, I think we have the exact same set of. Binoculars. I have it taken apart and through the big lenses Ilooking through I can STILL SEE dirt and dried sand and dirty water. I have them all dried but the interior lens still have dirt on the inside of them. Can I expose them for cleaning?
@VirantRoss5 жыл бұрын
theoverengineer The dirt & haze is still on the inside lenses, can I take the lenses apart somehow to clean them?
@theoverengineer5 жыл бұрын
Of course. Inside, more threaded lock rings and angular prisms to bend the path of light around. Do not move the prisms out of alignment.
@szalonazaba8069 Жыл бұрын
@@theoverengineer Jakie powiększenie ma ta lornetka?
@chrisfaldo09252 жыл бұрын
good video clip. If you put a thin washer plate in between, you do not have to take the screw so tight.
@hishamphysique81845 жыл бұрын
Merci / thanks / شكرا
@mr.cliffordjohnson63047 жыл бұрын
Very Good video
@richardlevander54099 жыл бұрын
Nice video Dude! Rick
@Patriotman548 жыл бұрын
THANKS
@irmaherrera77485 жыл бұрын
Nesesito diagrams para ensamblar binocular Bushnell rangemaster 7x.35 m m
@user-th6jt2sv9f8 жыл бұрын
Hi How decoding and repair of Carl Zeiss 10x40 Notarem multicoated and repair balance Alaadasat? I have the moves and spins but does not change the lenses and never nearly ?? Can you help me!
@theoverengineer8 жыл бұрын
+عساف العساف Not familiar with that model. It probably works like any other binocular, has threaded spindles for focusing, glued-in-place threaded lock-rings concealed with exterior trim. Inside the binoculars is Nitrogen or other gas, not air that make servicing tricky.
@GuybrushThriftweed3 жыл бұрын
Stumbled on this clip looking to repair a pair of binocs. Can't remove the screw though. It seems like it's glued or has threadlocker applied because there are signs someone had already tried/did a repair. Any tips on removing it?
@StOKRATzoom2 жыл бұрын
Servicing Repair of binoculars kzbin.info
@ashfun055 жыл бұрын
Can someone help me actually repair/replace the focus wheel? Part of the focusing mechanism broke due to which the mechanism came apart. I fixed the broken part but I'm unable to put the focus wheel back in place between the two parts. Any help will be greatly appreciated. Thanks.
@navidfarhan37754 жыл бұрын
Brother my tento's focus wheel got stucked it was not used for a very long period of time
@richardnelson79294 ай бұрын
Thanks for the video, but please use a washer.
@bobcohoon96153 жыл бұрын
Thanks for the info
@theoverengineer3 жыл бұрын
No problem 👍
@StOKRATzoom2 жыл бұрын
Servicing Repair of binoculars kzbin.info
@bouchardpalomata98708 жыл бұрын
good day to you sir, i need your expertise. i just both BEILESHI 10X50 BINOCULAR and accidentally immerse it into water for an hour and some water gets inside..do you have any video to guide me to open and clean my binocular sir? hoping for your positive responce..tnx
@theoverengineer8 жыл бұрын
+Bouchard Palomata No video but the lenses all come out and are held in place by threaded lock rings that may or may not be glued and/or sealed. Here is some visual ideas: kzbin.info/www/bejne/aJvMhmWql5t_oM0 You have to find the notches in the rings and open the binoculars up.
@FlavioDecorPJ6 жыл бұрын
SHOW SÓ FALTOU LEGENDA EM PORTUGUES;; RS LOL
@philipcose14812 жыл бұрын
to stop any nut or bolt seizing use a product we used in motor racing (Wheel Nuts) called called ""Copperease" by carlube
@theoverengineer2 жыл бұрын
Thanks for sharing!
@danb.33972 жыл бұрын
OK, that was just too funny.
@user-fq9is9ms2k5 жыл бұрын
جيد
@chrisross79259 жыл бұрын
they look like soviet style binocs from the cold war era or prior, yes? Excellent mechanical understanding by the overengineer who must be German, right?
@theoverengineer9 жыл бұрын
Chris Ross Eastern block, confirmed. I bought these bin`s at Porst in `89? or so.
@MrSjefwierink9 жыл бұрын
theoverengineer I guess the oval sticker on it indicates that it is of japanese origin.
@theoverengineer9 жыл бұрын
Sjef Wierink Carena is an in-house brand name sold by Porst, a German manufacturer that folded recently.
@brianpartrick53383 жыл бұрын
Can you show how to replace eye-lens on GreenKat binoculars ? Thanx for your 'eye-opening' videos BP.26/09/202
@StOKRATzoom2 жыл бұрын
Servicing Repair of binoculars kzbin.info
@ApatchiApatchi3 жыл бұрын
Very nice👍👍👍 🇹🇳
@theoverengineer3 жыл бұрын
Thanks
@StOKRATzoom2 жыл бұрын
Servicing Repair of binoculars kzbin.info
@monedas.antiguas.numismati86542 жыл бұрын
What a reference are these binoculars, I have some similarities. But it broke me
@rockhound71473 жыл бұрын
“As you can see, there’s a cap here with glue holding it on. See? There’s the glue. Don’t try to use a 75 lb sledgehammer to open it because you could break it. Here’s my 75 lb sledgehammer. It’s too wide. Here let me zoom in on the sledgehammer so you can see that it’s too wide. See? It’s too wide.”
@StOKRATzoom2 жыл бұрын
Servicing Repair of binoculars kzbin.info
@FirozAlam-fm4zz Жыл бұрын
Henge of my right side if binocular loose enough how it will be tight as before? Please advuse me. Model : Bresser 10 * 25 travel. Love from India
@theoverengineer Жыл бұрын
Never worked on that model, have no idea
@kontragonismobilisasi90134 жыл бұрын
Hi goodmorning sir Myname is abdul from indonesia. Please learn me to service my binnocullar zoom not function. My binno is sehfeld made in rusia. Thankyou sir
@theoverengineer4 жыл бұрын
Shoot video, show problem (in close-up), copy the link here so I can see it
@puiachuauzik75703 жыл бұрын
I'm curious to know what accent this is.
@StOKRATzoom2 жыл бұрын
Servicing Repair of binoculars kzbin.info
@monedas.antiguas.numismati86542 жыл бұрын
I could say x favor as is the reference and more information. Make them