Bira Sunlit MINI Die Cutting Machine | What's it Like??

Hello crafty friends! I'm sharing a recent purchase of a Bira Sunlit MINI Die Cutting and Embossing Machine. So what's it like? Does it actually do what it says? Check out this test run and see for yourself.
This little unit is made of metal gears inside and is a petite size perfect for sitting on my desk for a quick die cut. The throat is 3" wide instead of the more common 2 1/2." This will work for a lot of my dies that are at that 3" width which seems pretty common.
-- LINKS --
BLOG: sugarshinedesigns.blogspot.com/
INSTAGRAM: / sugarshinedesigns
FACEBOOK: / sugarshinedesigns
PINTEREST: www.pinterest.com/jaxtman01
KZbin: / sugarshinedesigns
-- SHOPPING LIST --
^^^Thanks for considering a purchase using these affiliate links. My videos are free and your support is one of the most important ways that I can afford to continue to show new products and supplies on my channel. My goal is to help you decide for or against a purchase and ultimately save you money. Sometimes I am provided free or reduced merchandise but my opinions are always my own. The Bira Sunlit Die Cutting Machine was purchased entirely with my own money. ^^^
• Bira Sunlit Mini Die Cutting Machine/Machine and Plates ONLY [this is what I purchased]
---amzn.to/32jklHR
* Bira Sunlit Mini Die Cutting Machine/Starter Set with Plates, Dies, Embossing Folder & Cardstock
---amzn.to/32pWmHn
* Bira Sunlit Replacement Plates (set of 3)
---amzn.to/3hlp2Fz
* Bira Sunlit Replacement Cutting Plate Only
---amzn.to/3bOBBI7
*Bira Sunlit Replacement Rubber Mat Only
---amzn.to/3bLA3yM

[@terrissaf]

Thanks for this wonderful video! I just ordered this and wanted to watch a tutorial so I would be ready when it arrived. :) I'm just getting into paper crafting. Very informative and pleasant to watch.

[@SugarShineDesigns]

I love it so I think you’ll be happy too!

[@adrianaariza-jones3694]

Thank you so much for this demonstration . I am in the look for a cutting machine . I am a big ginger so this is perfect for me . I will buy it from your link ! 🌹🌹🌹🌹. Beautiful roses !!

[@SugarShineDesigns]

Thanks so much! I’m glad this helped make a decision and thanks for your support by using my link. I think you will get years of enjoyment from this little powerhouse! I use it several times a week and love it. Happy crafting!

[@sandramatthews2878]

Loved the demo ..thank you …

[@SugarShineDesigns]

My pleasure! Janet

[@debsam77]

I have the spellbinder platinum and wanted a smaller one and decided on this one too. It’s arriving on Friday and I’m so excited 🥰

[@SugarShineDesigns]

I love mine. So handy! Enjoy it!! Janet

[@Babs-Veterans-are-Family]

LOVE the bright yellow and pink Rose's. And oh the smell jealous

[@SugarShineDesigns]

I love having a few flowers around. It gives me mojo. There’s nothing like those colors to rev up my creativity and the scents don’t hurt either! Thanks for watching! 💐

[@dingfriesaredone]

I also have the Tim Holtz one. It is my favorite tool in my craft room. The plates will eventually warp but if you rotate them and flip them they will flatten out for longer life. It would be nice having that extra 1/2”.

[@SugarShineDesigns]

Love hearing that you love and use your mini. I hope I’ll love this one as much. Thanks for commenting. I love to hear from viewers and get their opinions. ❤️ Janet

[@sweetpeasifers4319]

I gotta have one!

[@sandramatthews2878]

Thank you ..I have been considering buying a mini machine for taking with me when I go to craft group and when travelling..

[@SugarShineDesigns]

I am really pleased with it and have almost worn my plates out at this point. Fortunately they do sell new plates. I don't think you'll be unhappy if you pick it up. It's so small and handy on the desk as well as ideal for portability. Thanks for watching! Janet

[@AKingZWldAQu33nZUnVZ]

A Non Slip Mat Would Probably Help With The Embossing Machine They Have Them Online,Dollar Tree Store Micheals,Hobb Lobby Just Made A Purchase Can't Wait To Try It Out😉😁😁😁

[@SugarShineDesigns]

Since I bought this, I got a glass mat. Sticks in place super with that. Sometimes it sticks when I don’t want it too! Love this machine! I use it every time I craft. It’s super handy. You’ll love it!

[@jenniferrodd3541]

Thank you for this video. This was the first recent video on die cutting machines I've found. All the others are from years ago. I've been debating for a few years about getting a die cutting machine. I make cards but just use washi tape and stickers to decorate them. Since I'm blind it's easier to do it that way. I thought die cutting could add some dimension to my cards. I was looking at the Sizzix Sidekick but the opening is only 2.5". I just found the Bira Craft on Walmart's website. I like the 3" size for dies. My cards are usually 4.25" by 5.5" so the small size is perfect.

[@SugarShineDesigns]

I’m so glad this helped you. I’ve been enjoying mine a lot. You are amazing to make cards when you are blind. I’m so impressed that you’re doing something that many sighted people claim they can’t do! Yes, dies will add more dimension for sure. The 3” size is ideal in my opinion. So much will fit through it. Best of luck in your creative work!! Janet

[@jenniferrodd3541]

@@SugarShineDesigns Thank you for your reply. I was thinking I coould use different colors of paper and do a layered look. Also today I thought how fun it might be to use wrapping paper that has a design and die cut it. I was born visually impaired and could see quite well until I was 22 so I know what things look like. I'm now able to visualize what something might look like. I'm not able to use paints and stamps and I can't make them as fancy as I wish but I still think people appreciate what I do give them.

[@SugarShineDesigns]

You are truly inspiring! I am sure that people who get a card from you treasures them. Very special! I have a friend who lost his sight around 25 in a car accident. He says he’s fortunate to have seen as long as he did because he can also visualize things. I admire your tenacity and desire to create art. Very awesome. 👏 want to also say that wrapping paper can make great backgrounds. Great ideas.

[@ladytee337]

Thank you for your making this video! I was looking at a smaller machine too and was debating on purchasing either the Bira or Sidekick. I'm more familiar w/Sizzix because I have the Big Shot but like the Bira because of the larger opening. Well I've made my decision based on your video Bira it is. I have lots of dies too but still like collecting so I'm going to purchase the starter kit :) thanks again

[@SugarShineDesigns]

Excellent! Glad I could help. I couldn’t find a decent review of it so that’s why I recorded it. I continue to be very pleased with it. Haven’t found anything to complain about yet. Enjoy yours!!

[@ladytee337]

@@SugarShineDesigns so I receive my mini starter kit as a gift from my son. It is so cute. I die cut the tag & 1st thought it didn't cut but it did. So now its wrapped & under the Christmas tree, lol. thanks again

[@SugarShineDesigns]

I’m happy for you! It’s a good little machine. I really appreciate your feedback. It makes my heart warm to know you benefitted from my video. That’s the goal! Merry Christmas!!🎁🎄

[@ladytee337]

@@SugarShineDesigns you're welcome & Merry Christmas to you too

[@marlenejones6266]

I have the little guy. I'm saving for the bigger 6 inch Bira. They have 9 inch ones too. This device is different. They have a dial on the side. To equal out the pressure so it cuts evenly all the time. That's why I want it. It's 90 for the 6 inch. And think it's 130 for the 9 inch. I can't wait

[@SugarShineDesigns]

That’s interesting. I honestly use this guy every time I craft. It’s so handy. Not sure I’d like a bigger one. My larger machine is at the ready but having this small guy on my table is a time saver and the small size means it takes little room and is easy to pick up. So much fits in the 3” throat. It’s surprising!

[@Babs-Veterans-are-Family]

I have the Tim Holtz one used a coupon. I never use the suction cup. If you want the suction cup spray a little water it will stick better.

[@SugarShineDesigns]

I looked at that one. It's a great machine but it's a 2 1/2" vs. 3" throat. Do you find the 2 1/2" is too small or is it ok? I just took a critical eye at my dies and noticed that 3" opened a lot more possibilites than the 2 1/2" option for me. Given the price and the fact that the gears are metal, I thought it was a small risk to try an unknown brand (at least unknown to me). I don't know if I'll continue to try to use a glass mat or not with it. Time willl tell as I use it more. I'll be posting in about a month with an update in the comments on how it's going, how the plates are doing and so forth. Thanks for watching and commenting Babs! Janet

[@SugarShineDesigns]

Great tip on using water. I have a fine mist water bottle and will try that if needed. Thanks again!

[@HodgePodgeHarmony]

Are you still happy with this?

[@elizabethhair9017]

I have a Sizzix Bigshot, but strokes left me unable to use my left arm, just ordered this so hopefully it will help, time to get making Christmas Cards.

[@ttok467]

Enjoyed this video. Can you tell me the name of the larger die you used ?

[@SugarShineDesigns]

Thank you! The die is Spellbinders Interlocking Love. I don’t know if they sell it anymore. I got it at Tuesday Morning. You might try EBay also. It’s a pretty die for sure! The number is S4-482.

[@christianjohnson434]

Hello! I am considering getting this tool. I have these plastic cutting die stencils to make earrings with. Do you think they will work with this product?

[@SugarShineDesigns]

I can’t say 100% since I’ve not cut plastic. If the die stencil maker says that a pressure cutting die cutter like a Sizzix big shot works, this should work too. You probably should confirm with the maker of the die stencils to confirm what kind of machine works. Otherwise, you can order and return this from Amazon if it doesn’t work.

[@curvygyrl]

What size dies do you use, paper

[@SugarShineDesigns]

I have this in the video but I think it’s a 3” mouth which means you can use anything up to that size. I find that 80% of the time, my dies fit in it. Won’t work for most card sized background dies like rectangles because they are bigger. Most paper piecing dies fit fine. Hope that helps.

[@edgarsteffen443]

Mrs, the machine have a ventose for mantain static in the table!!!