BIRD OF PREY CANOE STABILIZERS

Canoe stabilizer made with materials costing less than $80. Infinitely adjustable it allows the boater to easily alter the depth of the floats depending on weight in the boat. Unique cantilevered design provides an elegant solution to boat stability. Materials can be easily acquired and assembled by the modest handyman.

[@OJA1965]

One of the better DIY stabilizer ideas Ive seen

[@billgregory9560]

thanks for explaining all the parts and where they were from ,you are the only one who has done that ,now I know what to get thanks

[@jamiecfthedrummer]

That crutch idea was gold.

[@LauraNewton]

Absolutely Brilliant!! Love the crutches and the flag pole holder making both adjustable. Thanks for an awesome video!

[@djdrey69]

i replicated this set up and it works oh so great. turned my normal scanoe into a bass fishing tank! i also bought actual boat seats with swivels. man what a perfectly affordable rig. thanks so much for this video!

[@internetcrap7]

Can you post a video of yours? Would much like to see it

[@mattyh3000]

Out of all the designs I have seen yours by far the easiest and most effective just AWSOME

[@Nagpadawala]

The best design concept of ALL. Good looking and affordable. Thank you also for the recording this video. I know it takes a LOT of effort.

[@HicksHooks]

I used a similar setup with PVC arms instead of the crutches. Works great! Thanks for the idea of using flagpole holders! They work well.

[@STho205]

Best I've seen for home built. Recycling common scrap pieces into a durable looking unit, rivaling the commercial systems made in a production shop. Thanks for sharing.

[@MrChappy39]

The signature element of your design is the downturn of the outrigger strut. Well done.

[@nateroo]

Ditto and then some on all the positive compliments for this video... my brother and I have been researching options to either buy a ready made set or try and get creative ... this is one VERY CREATIVE DIY and we now have a baseline to follow! Thanx for a really helpful and well-presented video!!!!

[@montwolfman]

Age and cunning overrules youth and exuberance all day long.....splendid setup. Thanks for this video!

[@fernandizo]

Hey thanks for your idea.. I too am basing my design on your concept. I'm using lobster trap floaters and the flag pole holders to make the stabilizer more adjustable. You've done a great service to us with your video. Good luck.. And thanks!!

[@bada-bingbreakersclub9141]

Absolutely brilliant! Been looking all over KZbin for a video like this! Thanks for the tips!

[@MikeMehrle]

This is one of the best suggestions I have seen so far... good job!!!

[@Lvbstda14]

McGyver hahaha nice! I will try this on Saturday. Cheers, John

[@RabbyDane]

Bloody brilliant. The best I've seen by far. Well done.

[@bradwhite6941]

AWESOME ! - I am working on mine now. FYI - The crutches used for the stabilizer arms are described used as "Forearm Crutch" - $20-$40 used

[@martingarcia-gn8uu]

Thank you. Could not figure out why that crutch looked different.

[@tigerbaby99]

I built mine using rod holders. I am very impressed with the aluminum base. I hope to rebuild mine with a base like yours. Very well done sir!

[@jpklr]

yes, good concept but can we see this in the water please :-)

[@MrUglystick123]

Wow, Im jealous....you are brilliant sir, great job on the stabilizers and the video!

[@nickelson4738]

Very well explained, great idea! I will be building this for my canoe. Thanks for posting.

[@jkuhnlein]

What a great plan. Also a great name for the canoe stabilizer!

[@treefroglegs]

Brilliant!!! Especially using the adjustable crutches!

[@davebarr1955]

Great ideas, John!! I'm using your approach to build my canoe for Columbia River outings. Thanks.

[@MaxmumSpeed]

Very much a CLASS ACT . I'm looking at fishing offshore in the Everglades and these are gonna be a hot item ! Thanks for your great video !

[@stephenhand9503]

Thanks gave me the idea to use my regular crutches and a block of wood to connect to my canoe. I found a threaded PVC fitting fitted perfectly just needed a small screw and nut to hold it on. Now with the threaded connections I cut and used a clorox bottle to fill in the center and the filled it with foam made it more hydrodynamic.

[@gggooogggttt]

Great video, I'm making mine now! Nice Klingon reference too ;)

[@OnDayFiveFishing]

Shout out from OD5 fishing!! John, you hit a home run on this one, I can see why you're about to hit 40k views. Well done. I'm going to use your Model to get my Kayak ready for some fishing. New Subscriber!!!

[@runltdan]

Ok, !! That’s brilliant, simple, and cheap! 👍👍. I’m renovating a 15ft fiberglass canoe. You saved me a good bit of money with your stabilizer. Adjustable two ways, you can fold it away or just remove it easily. And you can design any piece to be stronger or lighter. I’ll have a 42” high light aluminum solar panel roof that’s going on the canoe and stabilizers are needed. The good quality versions that we find on-line are $$$$$ simply overpriced. Thanks👍

[@j.armstrong9021]

Love it, Great idea and explanation.

[@reaper4641]

I love it! Thank you very much for the awesome ideas, I will be implementing this asap.

[@2nd6months]

That is just plain excellent. so many good ideas put to use here. thanks.

[@joshpozzi1637]

You my friend are a genius! Thank you for sharing!

[@dustinnostrant5496]

This was a gem. Thank you.

[@nicklongworth]

Brilliant! Thank you for posting this.

[@buckdaddyplus]

Very Cool , I like the Klingon Bird of Prey Reference.Good Job!

[@Hammer_OJustice]

Great idea! Any chance you have it in a more step by step version that could be put on paper and printed so I can easily reference while building?

[@monzsterman]

This is so cool. Just what I was looking for. Thanks for posting

[@markbrenneman3293]

Good job getting right to the point and explaining everything.

[@scottishbushman3745]

absolutely fab video , great idea i will be doing this over the weekend John.

[@MichiganHiker]

Excellent work offering very good ideas. I am working on a design now for my canoe as I plan on a long solo trip and would like the stability on some of the larger open water I will be crossing. Great use of the crutches, I see them all the time in resale shops.

[@scottmonosmith113]

Love it I'm going to do this . Have a 12ft kayak with sail an 30lb. thrust trolling motor . Thanks best idea l've seen. May the fishing gods be with you.

[@TIKITIKIBOOMBOOM1]

At 2:00 you see a shot of the small aluminum angle pieces set in the hull. I just drilled a hole through the hull and bolted it through and through. Used a bigger washer on the outside of the hull. Very stable this way. All metal is attached by thicker sheet metal screws--drill small pilot hole first.

[@stevenrldenault7451]

Nice job, good design and seem to be easy enough to make. Thank you for sharing and posting.

[@gabrielfranco245]

Impressive set up brother ,thanks for sharing your design, happy paddling.🙂🚣

[@stewie90]

Lucky those crutches fit perfectly in the flag pole holders!

[@j.chrismcgaugh5124]

BRILLIANT! Thanks for the tip! Fantastic video. :)

[@MrJoeAllert]

That was really ingenious and resourceful. Well done sir!

[@1SetDesigner]

Nice set set up and well done video. Thank you, I'll be using you design.

[@anibalguarderas6735]

Great video summer is right around the corner will put one together in the next couple weeks thanks great audio

[@sskyle227]

Incredibly well done!

[@paulsheffield4729]

I am totally going to use this design

[@garycalcote1227]

Great ideas..I'm gathering information to build my own stabilizers and I like the crutch idea.. Thanx for sharing.

[@edglover3805]

Very nice. I plan to do the very same thing. great idea and thanks guys!!

[@rgray58]

Added this to my canoe this past weekend with a few modifications. The struts for my crutches were 7/8" diameter and I thought it was too much slop in a 3/4" PVC T-fitting even if I used tape to fill. I used 3/4" CPVC which was a snug fit for the strut but still drilled a small hole through the fitting and strut to insert a cotter pin. The CPVC was looser in the floats than the PVC but a few wraps with Goriila tape snugged it up just fine. I added caps to the ends of the CPVC running through the floats. I didn't want to drill into the canoe sides and wanted to be able to quickly remove the entire setup. I used 2ea 1"x 6" boards as the main support. The lower one was cut to the inside canoe width just under the gunwales and the top piece over the gunwales. I used a carriage bolt inserted from bottom to clamp the two boards onto the gunwale at each end. Drill holes for the carriage bolt just a bit smaller than the carriage bolt and tap the bolts into the holes. This allows the square under the bolt head to dig into the wood so when you tighten the nut for clamping, the bolt doesn't spin. Rather than wing nuts I used plastic knobs for ease. I also replaced the wing nuts on the flag holders with plastic knobs. Finally, I drilled two large holes in the top 1x6 board for cupholders.

[@davidbest6209]

Pictures please

[@Standswithabeer]

Most Excellent! Going to put them on my kayak. Thank you.

[@jaytua730]

Great idea with the flag holders, I see those walking devices at the goodwill. I am putting a windsurfing sail on my kayak for offshore fishing. Thanks

[@user-ny1hw6qt5m]

Wow ... wonderful ~♡ I have as well made kayak stabilizer by using Frp & fiberglass. But I have difficult time making kayak stabilizer because I have never had any information on how I could use frp & fiberglass. On the other hand, you have great job while you easily work. So, your vedio clip helps me think another way to make some special stabilizers. Thank you so much ~

[@marchfifth1754]

This is the best setup because it allows use of the middle seat.

[@calebconner2000]

I based my stabilizer design on your video havnt tested them but I believe they will work very well thank you for sharing your disign

[@farnorthpicker56]

Excellent job!!

[@kamacoz9738]

Nice! Well done thank you for the info

[@TheFinalParadigm]

Fantastic engineering!

[@ashchks007]

This is GREAT. thanks for sharing

[@waynekato3858]

Thanks for sharing you did a awesome job

[@mattdavies7323]

Great idea thank you sr!!!

[@EricSchulzke]

This was worth watching just for the fun of it. Make me one and I'll buy it!

[@tyclark8162]

I sure like your rigging John, you think like I do. The flag pole adjuster will be on my new Scotty when it shows up soon. I am going on a trip n don't have time to rig my own unfortunately. At 200 bucks I didn't get beat up too bad. I rigged a dog food container at Petco or some store n made a awesome live well. I had (2) Hobies n they are absolute junk. Too bad you don't live around my woods NMich. Aa longtime Wyoming rancher n IDF Paradog. Anyhow, thanks for the rigging idea John.

[@djdrey69]

great design. i use exact setup, except for my center brace is 8 inches wide. plus i took the center bench out. perfect bass fishing machine

[@sbetts10001]

First class...I just ordered all the parts from Amazon.

[@robertloyd8394]

Great name. Immediately knew what you were talking about

[@tonyagogo]

I am using a second pair of crutches .By straightening the main tube removing the plastic from the T piece and centralising it I can then fit it to the strut extension.Fill tube with expanding foam,and save arm clips to make to make 2 litre bottle or rod holders.Thanks John.From Tony WElby. The Worcester Canoodler.

[@r5642]

outstanding design, very well made video. i'm going to make one of your designs for my canoe. thanks for including the "where to get " information.

[@vadrus4540]

Good idea !!!

[@keithhart6196]

Im impressed!!!

[@Newenglandah1376]

Cool set up, looking to build some for my solo.

[@pdczrwnskz]

Genius. I'm gonna make one.

[@geoffreydebrito7934]

very clever and innovative. I'm going to use them on my skin-on-frame rowboat for standing while fly fishing.

[@drla02]

Brilliant, just plain ole "keep it simple" idea at its finest. ;-)

[@matthewlane79]

Very cool, thanks for the awesome video.

[@cnn94001]

nicely done!!!!

[@pappy451]

now that's fairly crafty !

[@Wheelchaironspeed]

Great video thanks

[@sailawaybob]

Cool video, didn't like how mine turned out so may try this i like how it can be adjusted.

[@GITMachine]

I hit like the moment you said Klingon. Awesome. :)

[@stephenjohn700]

Ghostlore THen you will adore my 'Photon Torpedo Paddles"! (just kidding :-) lol)

[@suncoaster8578]

The best I have seen. 😎

[@tobylemieux7256]

From experience, the crab pot buoys/floats lift a large amount of weight and don't need to be that far out from the canoe to do it's job. I had mine snugged right up against the side of the canoe and we were in a situation where the undercurrent wanted to pull the canoe down but almost impossible with those floats on. You don't have to worry about clearing brush and obstructions when they are snugged up against the canoe.

[@TIKITIKIBOOMBOOM1]

I used a cotter pin to attach the metal strut to the plastic pvc. I inserted the strut into the the fitting of the float assembly as far as I could and then drilled a hole through it all to accept the cotter pin. You could use two-at 90 degrees- for added strength. I used appropriate fittings to get the diameter of the strut and float assembly PVC to match as closely as possible. Will not be a perfect fit--but you can get it close so the strut fits tight. Hope that helps and good canoeing!

[@flyemifyougotem9543]

Really looks neat

[@renaissancemarinetv3536]

very impressive!

[@franced3873]

Great video, one of the best. Thanks a lot. I am at this moment making some stabilizators for my sea kayak, just like yours, and with styrofoam floats like the ones you have. The ones I received from Amazon are not a great orange, not like there were shown. So I want to paint them. I know it has to be latex paint on foam but how does it react when in water. Here water is 25% salted (St Lauwrence River in Québec). Any advice from you and your readers how to make it last ? Thanks.

[@puregsr]

If you came up with idea, you should put that in the title because it is ingenious!

[@lungchan1729]

came back to save your video and give you a thumb up because I forgot to do so last time.

[@lonniehollifield8629]

I'm going to build this,I will pile my canoe full of kids and we'll see how it works but it looks like a great idea!!

[@great769]

Very professional.

[@OnDayFiveFishing]

I totally agree!

[@muddy1ish]

Nicely done video......cheers

[@ronschreiber3635]

Nice Job Sir .going to steal your Idea

[@amandasettee8922]

this is the best thank you for sharing

[@hokiedokie]

You must've done engineering for a living. Thanks for sharing