My first serious ASIC project

Рет қаралды 42,003

2 ай бұрын

Anyone can make custom chips now with Tiny Tapeout and ChipIgnite.
I put several project on one of those shuttles and one of them is a POV controller to display text and graphics in mid air.
Try AISLER at aisler.net with coupon "boardluni" for 5€ off! Or "hi_aisler" for 10€ off on your first order (sponsor)
My board there: aisler.net/bitluni/playground...
Pixel Pump: link.bitluni.net/pixelPump (sponsor)
Tiny Tapeout: tinytapeout.com/
ChipIgnite Shuttle efabless.com/chipignite
FPGA Verilog Lessons learn.lushaylabs.com/
FPGAs (affiliate links):
Tang Nano 9K FPGA: aliexpress.bitluni.net/tang9k
Tang Primer 20K FPGA: aliexpress.bitluni.net/primer20k
Tools (affiliate links):
Pixel Pump: link.bitluni.net/pixelPump
MiniWare TS80P: aliexpress.bitluni.net/TS80P
Preheating Station: aliexpress.bitluni.net/heatin...
Miniware Hot Plate: aliexpress.bitluni.net/hotPlate
Github Sponsors: github.com/sponsors/bitluni
Patreon: / bitluni
Channel membership: / @bitluni
Paypal: paypal.me/bitluni
bitluni live: / @bitlunilive
Twitch: / bitluni
Mastodon: chaos.social/@bitluni
Twitter: @bitluni
Discord: link.bitluni.net/discord
#ASIC #Verilog #Electronics

Пікірлер: 58

@aislerhq 2 ай бұрын

We are proud to support your projects, which are always impressive :)

@ronnydudeck8118 2 ай бұрын

Mir war nicht klar, dass man so konkurrenzfähige Preise in Deutschland bekommen kann. Meine PCB's kamen bisher immer aus China - aber das wird sich nun wohl ändern... ;-)

@nkronert Ай бұрын

6:38 The man places components in sync with the music 😎

@fluiditynz 2 ай бұрын

This reminds me of an EFTPOS project I did for a local retail suplier back around 2000. No HDL in that particular one but I had 2 SMD ATMEGAs on one PCB. One for custom keyboard management and LCD drive and one to drive a stepper motor, guilotine and thermal head of a recipt printer. I had to drive a whole line of pixels, over 500 of them. I found a character set I liked on line that wasn't proportionally spaced and downloaded the bitmap(olden times). Then I used visual basic to scan the characters and pixels into a look up table. I had to do vertical and horizontal expansion of the recorded character bits because otherwise the printing was too small. Got it working sweetly, scrolling out printed paper pretty fast. However although my customer paid me, he ran into trouble because of out of memory issues on the PCs. I figured out some time later that his PC custom software writing company likely used a microsoft common library comms driver that was later acknowleged by Microsoft to have a memory leak. However I think the memory leak destroyed his ability to get paid by his customer. Good work on the ASIC FPGA!

@anon_y_mousse 2 ай бұрын

Nice. I wonder if you could build something like this into an umbrella and use it as a portable, lightweight screen. Yes, I just watched Kingsmen the other day.

@Asn.1ce 2 ай бұрын

saw you working on this project at hackaday europe hut was to shy to say hi. me and my friend were guessing what the project was and we werent that far off. Keep it up dude

@GlennHamblin Ай бұрын

Your projects are always soo cool!

@grabasandwich Ай бұрын

Watching guys like you make some incredible boards makes me feel so...not smart 🤯

@zubrkabbi 2 ай бұрын

You are living a dream life!

@giantbee9763 Ай бұрын

Awesome (as always)! I'm inspired :D

@jb14_99 2 ай бұрын

Awesome projects as always! keep it up : )

@MK-vw6vm 2 ай бұрын

damn, i wish i had only 1% of your knowledge and skills..

@KodakYarr 2 ай бұрын

Study

@gnramires Ай бұрын

What's cool about knowledge is it accumulates. Keep studying, and trying to make things, and eventually you accumulate a great wealth of knowledge!

@TheDavidsonary Ай бұрын

I would propose that -rather than just studying- you just think of something that would be cool to build/code but you have no idea how to do it. Then just don’t stop trying till it is done. That is always a massive XP gain.

@runforitman Ай бұрын

I definitely need to look at putting some of my fpga projects on one of these I hope to go onto proper asic design one day, so this could be a good start

@andymouse Ай бұрын

Awesome work, Squeaktastic !!!!......cheers.

@serta5727 2 ай бұрын

Wow your skill is impressive

@jurajchobot 2 ай бұрын

The project is awesome. Question for your next project. What process node are you planning to manufacture your custom RISC-V computer on and what would be the price for 1mm squared dye size? How many transistors can you approximately fit in there? Also, are you using an FPGA to prototype the chip design? If so, what model?

@TheGunnarRoxen Ай бұрын

Amazing!

@lawrencerubanka7087 Ай бұрын

I just love it when you plug in your board and get nothing...cricket sounds. So now I know it's not just me!

@ppot8 2 ай бұрын

Great work. You might have killed the xtal on the ESP32 when you put it through the ultrasonic cleaner. ASIC design has come a long way from when I started in electronics. Verilog / HDL was quite new when I started, you normally had to get a library set from the ASIC vendor and then build out the required logic. I really wish you all the best

@mattanimation Ай бұрын

awesome!

@RoyvanLierop Ай бұрын

I can recommend THT USB-C connectors for personal projects. Easier to solder an debug, I'm using the USB4085-GF-A.

@southerndime333 2 ай бұрын

badass

@Freireg1503 2 ай бұрын

Such a nice project! But if you want to build your own CPU why not start with using any of the softcores frameworks available?

@dimontools 2 ай бұрын

Обожаю этого парня!

@zyxwvutsrqponmlkh 2 ай бұрын

The esp has an integrated hall effect does it not?

@memberwhen22 Ай бұрын

it isn't a hologram though. it's persistence of vision

@nkronert Ай бұрын

Speaking of FPGA boards, have you ever tried out the Tang nano 9k?

@GHILLIESARCADEANDMORE 2 ай бұрын

Cool

@ChrisB... 2 ай бұрын

Go easy on the ESP32, I have 4 running in my garden that have uptimes of 60+ days. 😉

@bb9263 Ай бұрын

good

@marcinelektronik3005 2 ай бұрын

Hi from Poland. Ile kosztuje zrobienie ASICa ??

@peaxoop 2 ай бұрын

I would love to subscribe to the chips as breakout boards, or see them on commercial products. Such a shame that they are so limited. I totally understand that they are on the side of a wafer that has a limited run, but still would be nice if they could run off a few thousand

@bonafide9085 2 ай бұрын

When I solder ESP32 by hand, I never put solder onto the thermal pad and never had any problem with it.

@309electronics5 2 ай бұрын

Its often not even needed. I have seen some cheap dev boards which also did not solder the thermal pad. If you dont extremely overclock it it should stay perfectly happy

@AttilaAsztalos 11 күн бұрын

One would think the tiniest drop of mundane CPU thermal paste would have been more than enough to make a positive thermal connection there, without the need to actually solder it in. If you want extra fancy, you could even use thermal GLUE, which does the exact same thing but even glues the thing on, and it sets slowly enough to let you solder it in comfortably...

@OrPhEeUs Ай бұрын

What's an open source shared silicon? Is it like RISC-V chips?

@JH-pe3ro Ай бұрын

Open source shared silicon means: 1. What is open is a transistor-level description of how to fabricate the chip into a permanent silicon ASIC(vs FPGA designs, which are flashable firmware, or RISC-V, which is an instruction set that a chip can choose to implement) 2. Because chip fabs cost a lot even to do the smallest run, Tiny Tapeout, the project bitluni used, shares hundreds of small designs on one die as an anthology. The board can choose to run any design on the chip by setting a certain pin configuration.

@gabrielduarte413 Ай бұрын

What do you mean with esp32 tends to crash? kkkkk

@TheSuperRunner 2 ай бұрын

Cool!!! I want to try tinytapeout some time

@TheAstronomyDude 2 ай бұрын

I always make sure my resistors, etc., have the text oriented correctly. Am I the only one crazy enough to do that?

@_DSch 2 ай бұрын

nooo, you could have saved some cents by using the hal sensor inside the esp32 xD

@OneLabToRuleThemAll 2 ай бұрын

EMI shields are for noobs In all seriousness, this was a seriously impressive project! Just like all your other ones!

@madhukeshnp Ай бұрын

This guy is GOD... 🙏

@TheTurmanDreams 2 ай бұрын

🎉🎉🎉🎉

@amyshaw893 2 ай бұрын

Didn't you build your own pick and place machine so you don't have to worry about hand assembly anymore? 😅

@domramsey 2 ай бұрын

Amazing. Although I want it to be able to access the Rick Roll graphic data...

@duduc998 2 ай бұрын

good service from Aisler? It was the worst company I had to deal with. They messed up a simple 4 layer PCB. More than half of boards had USB-C connectors with shorted or unconnected pins. It took them months to send us repaired boards and not all of them were fixed. At this point I stopped asking them to fix all of them because as a prototyping project, it was no longer relevant at this point. I had no problems with Eurocircuit.

@junefree 2 ай бұрын

using wifi websocket on esp32 is not that hard you know)

@spacenomad5484 2 ай бұрын

12:10 what's that supposed to mean? Release the source.

@gsestream 2 ай бұрын

and fpga with reasonable mass production would be much much better, the minor percentage of wafer are usage difference does no matter at all, when the fpga chips can be mass produced without thinking the end usage, the user can used it in whatever way freely. and you can also diy chips on a wafer, which is tons more interesting than just fab ordered chips delivered. current low costs fpga chips run at 400MHz or 800MHz by default. for hobby sake yep of course, but you can do stuff smarter too. any manufacturing should not be for "making living" but for free making of projects, opposite of making a living, ie freedom. then all the considerations of market money law nonsense will not make any factor in the reasonings and efficiency and usefulness. compare the programming/usage experience to arrow MAX1000. have a reel hanging pole like a dress hanger pole. lol. yep curse/blessing of asic is that you dont have to or cannot change the code logic. there needs to be the asic part of the fpga to load up the code. going fabless hmh.