Watch out the full sequence step by step to HOW give a professional look to your R/C bodies. You can reach the perfection only using our Liquid Mask, shop at: www.bittydesign.net/en/liquid-...
Пікірлер: 128
@robertwren22894 жыл бұрын
You're not really showing how to paint, but you are showing you're very talented. Great job!
@jasonreilich83982 жыл бұрын
Yes he is showing you how to paint these are the must required steps in between paint schemes also after doing each layer paint you will also go back in with an exacto blade and cut out more and then change those colors Etc and excetera until your desired look task is achieved👍 you must have a lot of patience because it is tedious but also very rewarding when you are done
@toysforboysrc2 жыл бұрын
Too much focus and are attention to detail for me to explain while also doing body & pain paint work when the job pays more than the video. So I’m guessing other ppl might feel the same way.
@ryurc3033 Жыл бұрын
Why does this only have 120 comments? Fantastic work friend. After trying a couple different products, I finally ran across this brand of liquid mask. So far been practicing on random scrap bits of lexan, and any clear/flat plastic I find. This product was a life changer for me. Thank you.
@Bittydesign Жыл бұрын
Liquid Mask is a game changer, much easier, much faster, much precision, all the way!
@HearnsHobbiesMelbourne5 жыл бұрын
Great work guys.. Bitty Liquid Mask is by far the best!
@steelyemry96122 жыл бұрын
Absolutely incredible!! Truly amazing work. I can tell you have tons of hours of experience. You are a Master of your craft! Thank you so much for sharing. Keep up the amazing work.
@SpectralViews11 ай бұрын
Excellent job!! looks absolutely amazing!
@aztlannative1624 жыл бұрын
Thank you for sharing this. 👍🏽. Very talented and creative.
@seanhatch44254 жыл бұрын
A talent I wish I had. Looks fun!
@gregsandy65602 жыл бұрын
WOW! that was amazing. I like the liquid tape sprayed under the body. If thats the way it comes off all in one piece when removed thats too cool. I have never had such luck. I'll have to buy at least two bodys one to beat on the other to show. GREAT job
@ryurc3033 Жыл бұрын
Liquid mask works better the thicker you put it on.
@sagnhill Жыл бұрын
I just registered at your website and will be making an order within the next 60 days. Looks like high quality merchandise.
@AndyonTour4 жыл бұрын
Wie immer eine krasse Arbeit!
@stephenforman88167 ай бұрын
Creamy! This job is outta control! Great work
@carlisleradiomodelcarclub22175 жыл бұрын
Amazing work
@cows19904 жыл бұрын
wow I respect your craft
@tacticalmattfoley5 жыл бұрын
This really helped. Getting the design drawn on the body is the most difficult task for me at this point. Can you link the 1.4mm Spray Gun? I have a 0.5mm that looks exactly like it. Incredible paint work, BTW!!!
@CDesigned3 жыл бұрын
What white do you back it with? And how do you cut the curves so easy! I struggle with small curves
@Rudimentary0073 жыл бұрын
Damn nice work. Had to sub.👍💯
@colestaples2010 Жыл бұрын
Just ordered one of your air brushes
@muddfoot69 Жыл бұрын
Amazing
@MatrixRC4 жыл бұрын
Great work! I just don't have the patience.
@seanjay86085 жыл бұрын
Nice,good work!I ❤it!!!
@rayrod90102 жыл бұрын
very nice work... what paint did you for the Backed White??
@justinthorsson4 жыл бұрын
great work ...love it..you don't have the stencils available do you? not really a great drawer
@Bittydesign4 жыл бұрын
Soon the stencils will be available on our website, follow us on FB/Instagram to not miss our releases ;-)
@isavatterodt8933 жыл бұрын
Nice done, love your work
@450967janeth3 жыл бұрын
Lamentablemente yo no tengo compresor Cuantas capas le das de mask liquid
@randywilliams19454 жыл бұрын
Great Work There
@stefanorabitti88983 жыл бұрын
About 6 Hours "start to finish"
@clives6815 жыл бұрын
Doesn’t look like you think your paint stefano, what size needle in your airbrush? I assume quite large? Or small with lots of pressure??
@omarferrer31885 жыл бұрын
What marker do you use?
@philippedb1535 Жыл бұрын
SUPER taf chapeau waaauuuuoooooo
@slottygw2wvw8423 жыл бұрын
wow faskolor this is old school paint!!! they went out of business ages ago no?
@THEMASKEDMASTER4 жыл бұрын
✌🏻😎🏴This video is awesome. Your inspiring me and motivating me to use something I have never used before. Look Amazing. I have a bunch of questions about Liquid mask if you don’t mind. I would like to use an airbrush to spray the liquid mask but the only airbrush’s I have are gravity & siphon feed for airbrush painting. I don’t have a gun like the one in the video. I would like to use my siphon feed airbrush. Q1. What size needle & nozzle do I need in the an airbrush to spray liquid mask ? Q2. Can the liquid mask be thinned out/down to go through a small airbrush needle & nozzle ? Q3. What do I use to make your liquid mask thinner? Q4. What is the shelf life of an open container of liquid mask? Q5. What is the shelf life of a factory sealed container of liquid mask? Q6. What amount of air pressure should I use? Q7. How long can the liquid mask be left on the body before you need to peal it off? Q8. Does it react badly with certain types of paint? I have Proline Airbrush paint, clears & reducer etc. Q9. Please could you do more content on liquid mask & painting because this is awesome? I’m new to drawing, painting, airbrush etc. I have an airbrush & compressor kit I have never used and all of the paint sets from proline which I have also never used. Up until now I haven’t been motivated to do anything & I have been ill for a very long time. Now I really really want to do something with it all. Hopefully with your help and guidance I can keep this up. & hopefully you will create more content 👍🏻
@Bittydesign4 жыл бұрын
Q1. From 1.5 to 1.7mm nozzle is what we recommend. Q2. Our LM is ready to use, we never thinned it before. Q3. Even if we never thinned it you can do it with water. Q4. Without any problem a open bottle can be used after 6 months (or more). Q5. Long life, after 1 year the LM maintain the same specs as a new bottle. Q6. Recommend 3.5 bar pressore (500psi) Q7. There is not a specific time, the moment to peel off the mask is when it change color because the water dry and the mask become semi-transparent; before remove the mask you need to cut with an hobby knife all the lines of the graphic that you’ve drawned. Q8. I have Proline Airbrush paint, clears & reducer etc. The LM is not compatible only with spray cans, the special formulation has been developed for the use with all the water based (acrylic) paints on the market. Enjoy the use of our Liquid Mask!
@Roach8384 жыл бұрын
How long did it take you to do ?
@littleshovelperkins3 жыл бұрын
Do you use clear coat?
@jcchaconjr4 жыл бұрын
Great video! Do I need a spray gun for the Liquid Mask, or can I get away with using the #5 needle on my Paasche VL? I can get a reasonably priced 1.4mm gun, but I will probably need a better compressor than the 3 gallon I have. I also don’t think that reducing the LM would be a good idea.
@Bittydesign4 жыл бұрын
To spray a 1,4mm nozzle spray gun it's okay, use about 50psi and apply 3 coats.
@thefriendlyteenager7263 жыл бұрын
@@Bittydesign is it okay to use liquid mask from other companies?
@Bittydesign3 жыл бұрын
@@thefriendlyteenager726 you can use the LM that you want sure, but there's nothing who perform so good like our own LM ;-)
@thefriendlyteenager7263 жыл бұрын
@@Bittydesignthanks, I just picked up a bottle of your liquid masking the other day even though I am an amateur at body painting I was impressed
@NoName-dn8nv Жыл бұрын
It never dries and always peels when I try to cut it. I cant believe you get suck good results im ready to try Elmer's glue
@cobraback58064 жыл бұрын
Nice work! Do you paint for hire? I could really use some help.
@kincaidkmf2 жыл бұрын
"Use drop shadows technique" -- got a video for that too?
@-milkshakeartistandsportsm4334 жыл бұрын
Nice job! But... the most important thing....show us the picture after the skin protection film off ㅠ
@WERONEfishing4 жыл бұрын
can i have that bodyshell pretty please
@JonathanPortaCH4 жыл бұрын
I just ordered BD Liquid Mask and I'm starting with airbrush... I only have a 0.4 needle for now, so I suppose I won't be able to spray the Liquid Mask with that. I've seen somewhere it can also be applicated with a sponge, is that right? Could you please confirm that once the mask is dry, you cut everything that need to be cut at once, then peel the parts only when needed? I'm worried If I cut too soon, the paint can fill the gaps...
@Bittydesign4 жыл бұрын
Exactly, cut everything that need to be cut at once then peel the parts only when needed. LM can be applied with a spray gun (1,5 nozzle and 3.5 bar pressure) or with a soft brush, 3 layers.
@TheRoadTaken2 жыл бұрын
@@Bittydesign Thank you for replying to Jonathan. I had literally the exact same question.
@Mugen-MTC2R4 жыл бұрын
Good job m8 that´s surdenly not the first body you ever made, but its a shame we dident get to see it with the protective outer film off, i know that the black lines that cross out on the painting is on the outer film and goes away once the film is removed but it made the end result, we got to see, look like it was done by an amature.
@az_pit_viper42703 жыл бұрын
Bittydesign what brand/model is the airbrush that you were using that had the paint bottles attached to it?
@Bittydesign3 жыл бұрын
It's our own airbrush, soon will be released to public, follow us on FB and Insta and don't miss the new releases.
@paulkauss93463 жыл бұрын
That is clownin good job
@rags2richs8933 жыл бұрын
What air brush are you using or would recommend? Thank you
@Bittydesign3 жыл бұрын
We recommend to follow our social channels (FB and IG) because we will release in April our painting equipment line up ;)
@LoLoS2o65 жыл бұрын
Hello, what airbrush use with the Faskolor paint and what tip? Thank you!
@Bittydesign5 жыл бұрын
Something very BIG about "airbrush" is coming soon, stay tuned, July will be a very interesting month for all the painters ;)
@jidai75064 жыл бұрын
@@Bittydesign new airbrush?
@diegoolivera64684 жыл бұрын
@@jidai7506 It has been over 7 Months nothing came out?
@rags2richs8933 жыл бұрын
Any updates on what air brush and tips he’s using
@sniffmasterz3 жыл бұрын
What is that for a song?
@thomaskuter66894 жыл бұрын
Where do you get that mask for the headlights and grill Or what is it called Looking everywhere for that stuff
@Bittydesign4 жыл бұрын
No mask, they are handmade body per body, we use our Liquid Mask to cut at the perfection the details of the lights.
@kotkln4 жыл бұрын
@@Bittydesign you make the perforated "tape" you used on the grill. like cut vinyl or is it something that is available
@stefanorabitti88983 жыл бұрын
Hey guys, I'm the painter of the video. Is a one-way vinyl. Available also on Amazon.
@saadlebdeh897 ай бұрын
Where can I get or download the design? Was hoping this video showed the design more as I have seen this design done by a few people but can’t find it to download and try.
@Bittydesign7 ай бұрын
You won't find the template online, you can only try to replicate the MR livery simply by using the thousand pics available on Google (option 1) or, alternative, order a replica to us (option 2) like the customer of this video.
@saadlebdeh897 ай бұрын
@@Bittydesign Yeah I’ve looked lol and no I can’t find it anywhere. As I’m in Australia I would think shipping a body from your base in Italy would be rather expensive. I love your products by the way. I just purchased the Eptron body and I use your masks and stencils. You guys design very stylish and fast bodies. I’ll go to your site though and get a quote for a body as you have me intrigued now lol. Thanks
@toysforboysrc2 жыл бұрын
It must be hard to let those bodies go after all that work. It’s like keeping the body feels better than the money from a sale. Are you cutting the film with a metal razor or a ceramic/graphite razor?
@Bittydesign2 жыл бұрын
Check out our website, item code #BDHK-11323 called "Hobby Art Knife", this is the tool we use to cut the Liquid Mask, we also sell the spare blades.
@toysforboysrc2 жыл бұрын
@@Bittydesign …. Thank you I’ll do that💪
@alankowalski8781 Жыл бұрын
Can I order a custom painted body from you? I don’t have hands that are even close to steady enough to do something like that
@Bittydesign Жыл бұрын
Alan of course, drop us a line (see email address on our website) and we will pleased to paint a body shell for you
@morytox Жыл бұрын
can i spray this liquid mask also with a normal small airbrush gun or do i need such a big one because of thickness ?
@Bittydesign Жыл бұрын
You need a spray gun with 1.4 / 1.7 nozzle and use about 3,5bar air pressure.
@morytox Жыл бұрын
@@Bittydesign is an Normal Airbrushcompresser such as AS186 sufficiant for such a gun, or do i need a whole other compressor setup to spray liquid mask? (I guess it gets difficult in the cfm department right?)
@Bittydesign Жыл бұрын
@@morytox Airbrushcompresser AS186 is too small, you need 25L normal air compressor
@FixCarGhost5 жыл бұрын
Excuse me!Where can I buy 3:45 mesh sticker?
@Bittydesign5 жыл бұрын
Soon at Bittydesign.net! ;-)
@hendrixghost4 жыл бұрын
Is all the detail in the headlights done with masking?
@stefanorabitti88983 жыл бұрын
Yes. Everything done by freehand
@allroadaustin6172 жыл бұрын
@@stefanorabitti8898 I wanted to ask when you say cut in one time what do you mean? Cut all the design at the same time? Or cut every line and never lift the blade off the body? Some help would be great! Freak work!
@stefanorabitti88982 жыл бұрын
@@allroadaustin617 first one. Cut all the design at the beginning. Not only the first area to be painted.
@menso38522 жыл бұрын
Is the spray gun for the LM HVLP?
@Bittydesign2 жыл бұрын
Yes correct, HVLP spray gun from 1.4mm to 1.7mm nozzle
@sayayo91084 жыл бұрын
How can i get liquid mask?
@Bittydesign4 жыл бұрын
🛒Directly from our store at bittydesign.net/en/liquidmask
@justinthorsson5 жыл бұрын
can i buy one already done?
@Bittydesign5 жыл бұрын
Justin if you mean a "Rheinard Replica" already done this in not possible, we paint these extreme bodies only based on customer order; if you mean more in general a "painted body already done" yes in this case we have in stock some bodies, contact us by email (see our address on website), thank you.
@nicolaranieri41253 жыл бұрын
hi I wanted to know where I can find the micro honeycomb masking to airbrush the front radiator grille!! thank you.
@stefanorabitti88983 жыл бұрын
On Amazon. Search for "one way vinyl"
@nicolaranieri41253 жыл бұрын
@@stefanorabitti8898 Ciao o intrapreso la passione per l'aerografo per farmi le carrozzerie da me, volevo alcune dritte(se possibile!) le mascherature della BITTY perché non un minimo di adesivita, poi con che pressione si usa la mascheratura liquida di BITTY e i colori normali! Ma più importante dove posso trovare l'effetto griglia.Ti ringrazio anticipatamente perché sicuro di un tuo consiglio
@stefanorabitti88983 жыл бұрын
@@nicolaranieri4125 ciao! Ti Consiglio sempre di scrivermi su Facebook o su Instagram. Se per consigli di verniciatura anche ai miei profili personali. Non le abbiamo fatte leggermente adesivi perché altrimenti non sarebbero Stati riutilizzabili. Così facendo ti sporche Rai un pò le dita ma puoi usarli tante volte. Per la Liquid mask hai guardato la pagina prodotto sul nostro sito? Trovi tutte le info li. TUTTE. per i colori da Aero grafo io uso una pressione di 3.5 bar. Quindi piuttosto alta ler sopperire alla densità dei colori all'acqua. Li uso così fuori dal barattolo senza diluizioni strane.
@stefanorabitti88983 жыл бұрын
@@nicolaranieri4125 per la griglia ti ho risposto nel commento precedente. Vai su Google e scrivi quello che ti ho scritto.
@nicolaranieri41253 жыл бұрын
@@stefanorabitti8898 Mi piacerebbe conversare con te, non immagini che sforzo sto facendo a scrivere dato che con i miei 54 anni senza occhiali, spero di non scrivere cazz...per scelta ho solo WHATSAPP come social. Tornando all'effetto griglia, devo trovare "One way vinyl!!"
@thewizardmodelisme92774 жыл бұрын
bonsoir quel serai vos prix pour peintre un camion tamiya en laxen
@Bittydesign4 жыл бұрын
Hello, we paint only our own IRON truck body, see our website for details ;)
@bigbadbob644 жыл бұрын
What airbrush are you using
@Bittydesign4 жыл бұрын
This airbrush will be on sale on our new website (in May), continue to follow us on our channels so you don't miss the day that our painting equipment will be launched! 😉
@rcstumpjumpers20492 жыл бұрын
wow
@smellurfingerrcdejesus91765 жыл бұрын
Price for a painted body
@Bittydesign5 жыл бұрын
Drop a line to our email (see the "Contact Us" page on our website) to get a free quotation for a painted body.
@lukedinardo4 жыл бұрын
Fantastic work with amazing result, now this is why I paint my bodies white with a tamiya PC rattle can.
@stefanorabitti88983 жыл бұрын
LOL
@gabrielemoro14 ай бұрын
Come pulisci l'aerografo tra un colore e l'altro?
@Bittydesign4 ай бұрын
Con semplice acqua tiepida essendo i colori acrilici.
@DeezLouize Жыл бұрын
Woulda been great to see it without the protective film over it with all the mockup marks on it
@rchopup26394 жыл бұрын
To ruggedize your RC Body, use "Truck Bed Liner" in a spray can for the final undercoat(s)... It should greatly extend the life of the paint, help to prevent cracks, is nitro safe, and is lightweight for the amount of durability and strength it adds.
@blueskiesahead014 жыл бұрын
How much for you to do this for me?
@Bittydesign4 жыл бұрын
Drop us a line to info@bittydesign.net to get a free quotation! 😉
@Anonymist794 жыл бұрын
Take my money
@Mugen-MTC2R3 жыл бұрын
This is way beyond my skill level with an airbrush.... but damn it looks good
@rcstumpjumpers20492 жыл бұрын
this is way beyond everyone's level but fun to watch.
@kitchenbriks36853 жыл бұрын
Not pulling the film at the end was a tease
@billimono44804 жыл бұрын
where do you get that mask for the grill?
@stefanorabitti88983 жыл бұрын
On Amazon. Search for "one way vinyl"
@Steve-yu6pq2 жыл бұрын
Me: crashes in first corner
@andrewmcallister41513 жыл бұрын
Don't make it look so easy... probably 2 hours into that paint. But looks awesome..