inflatable boat making from chicken wire net and fiberglass (part 1)

[@krissfemmpaws1029]

I'm impressed with your thinking outside the box with how you formed the tubes I have used plastic pipe. I've done quick and dirty molds for projects both on the job and personal projects. I think the skin is a bit light but again I use to build fiberglass boats and parts for a living.

[@Cranki_T]

I was going to say something similar regarding the skin and joins to be a bit light. For the join for the Hull base with the ducky tube , I would of used and entire sheet across the width instead of small strips, as with any home fibreglassing job, de-lamination will occur over time and stronger joins will help reduce that.

[@eko333]

Selamat pagi saudaraku. Menyenangkan sekali melihat video yang bagus dan menarik. Perahu fiber yang keren. Kerja bagus, saya suka video Anda. Saya berharap di masa sulit ini, kita memiliki semangat yang sama dalam meraih sukses bersama. Semoga sukses untuk Anda dan semua yang terbaik dan saya menunggu kunjungan Anda berikutnya.

[@alfredococa8803]

Soy Diseñador Industrial , y e quedado maravillado de su imaginacion , usted en un pais desarrollado y con acceso a estudios hubiera sido muy famoso por sus diseños e imaginacion para crear cosas ; Es increible que con solo una pequeña tijera , una brocha y un martillo usted haya podido crear este bote , cuando una persona se propone hacer algo si le pone corazon e interes no hay nada en este mundo que lo pueda frenar , ( FELICIDADES. )

[@polyborus5177]

какой конструктив изящный, сетка, ай да молодца Серёжа! Все ребятам в пример! Глаз не оторвать! Спасибо тебе наш далекий юго-восточно-азиатский друг)) Все-таки рыба в рационе большое дело!

[@bkscreative]

Спасибо, брат мой 😊😄👍

[@jimmyfleebot]

I am so impressed by your methods. So resourceful and clever use of materials.

[@101jchristensen]

Beautiful work! Thanks for sharing this.

[@BobbyOfEarth]

I've never seen anyone do so much with a pair of nose hair sissors!

[@whileysea]

I am congratulating you Sir. You show me a new world of Do It Yourselves. I applaud you. Greetings from Switzerland

[@seanlee4590]

This is absolutely genius!

[@mas_dem]

Pembuatan kapal dengan cetak fiberglass sangat bagus hasilnya kawan

[@DrarslanAbdulsattar]

PADLLEE POINT 2 AAND 8 STICK COVERED FFOOR 2

[@clavercalwing2808]

Ok po design at proseso pero dapat may in structions as you do the project na mabanggit po yung mga materiales na gianagamit po.

[@erichanastacio9695]

Nice design.... But you can improve it's boyouncy and prevent from sinking. If that thing gets punctured, the boat might sink because it's one big air... or water... container. You can section the chicken wire mesh hull's interior with several closed/sealed empty 8-to-10 liter plastic water bottles. You put those empty water bottles inside the chicken wire mesh, and then you seal it with fiberglass. In case it gets punctured, the boat will stay afloat since the other airtight bottles won't take in water. But if the fiberglass resin will affect or melt the plastic bottles, then the plastic bottles should be wrapped in several layers of paper before encasing them with the chicken wire mesh and fiberglass.

[@cassiusclay7482]

Bravo très bon travail plein d'ingéniosité 😀

[@benskai2475akurfishing]

terimkasi senior ilmunya salam dari kepulauan aru maluku salam kreatif dan salam sehat selalu

[@mmullaley]

Nice job. Thinking outside the box. I'm impressed big time.

[@HendraSukarsa-d2m]

inspirasi ini mah,, lanjutkan mas bro

[@aweyy733]

Mantapppp sendiri buat jimat belnja,,terbaik sahabtku..👍👍👍Salam kenal

[@bobboboff5326]

Вот так шутя можно за месяц построить цеелый флот! 👆 Просто гениальное использование пластиковой трубы 👍👋 Подписался!

[@carlosclaptrix]

I admire your way of doing things! 🙏🏻

[@adventurousloner]

A few minutes in I can tell it's not going to be inflatable with a rigid body. But, still gets a like.

[@MAGATRON-DESTROY]

Awesome job so far!

[@marekszymecki4454]

Powinieneś używać wałka malarskiego odpornego na żywicę poliestrową i epoksydową zamiast pędzla. Będzie szybciej i wygodniej. Do żywicy używaj pojemnika z obciętego pojemnika po oleju samochodowym. Używaj rękawiczek gumowych , nie będziesz miał oklejonych dłoni. Zawsze to bezpieczniej. Wiem co mówię. Też działam w tej branży.

[@powerlooper]

Excellent work. I see you have the gift of 3 dimensional sight. Not too many can do this. Liked and subscribed.

[@wojomojo]

The size of the scissors. Respect.

[@The_Cat_Princess]

Great! Are you God? Lightweight, strong, excellent buoyancy and stability, this is no more rubber boat that sinks on hooks and fish dorsal fins!

[@erichanastacio9695]

If it gets punctured, it'll sink. You need to put several empty 8-to-10 liter plastic water bottles inside the U-shaped hull. Wrap the bottles with several layers of paper before putting it in the chicken wire mesh... Fiberglass resin might affect or melt the plastic bottles so wrapping them up in paper would prevent the melting. In case it gets punctured, the other airtight bottles will keep the boat afloat.

[@markmason3981]

Misleading title. That’s 1/2” hardware cloth. However, the ingenuity is impressive.

[@Dr.Reason]

Doesn’t seem very inflatable either.

[@mohammadisamario1988]

this guy is a genius

[@martinpugatuanama9462]

excelente trabajo, el vídeo de la parte 2

[@zan6169]

Приветствую. Золотые руки. Новых идей. Всех благ.

[@RonnieStanley-tc6vi]

Great job. But please, someone buy this guy a better pair of scissors.

[@randypratt2887]

Very nice work

[@KiamaiPagung]

pakailah roler adeee

[@aventuratamanho-familia984]

Muito legal esse projeto, estou fazendo um barco também e seu canal jfoi a inspiração exata

[@TaigiTWeseDiplomat--Formosan]

It's a solid boat!

[@winterhorse290]

OUTSTANDING!!😁

[@adamturner4127]

Beautifully built.

[@h.andimasdar1349]

Saya kira abang orng thailand.. Kreatif bang

[@bkscreative]

Terima kasih sobat kreatif 😊😄👍🇮🇩

[@artemis0010mh]

​@@bkscreativeWhat is that material you put on under the chopped strand fiber glass building a similar pontoon style boat

[@deltasierratango127]

This awesome. Thank you for this video!

[@mohanMohn-lx4gu]

Very good thanks🙏🙏🙏👏👏

[@bligustv17]

Keren suatu saat mau bikin yg kyak gini ditunggu part 2 nya bosku

[@veeraponghemakiatikul9426]

Good job❤

[@jesusislord-ht1nj]

Very good work.

[@cairosouza]

Canal CairoSouza passou aqui novamente do Brasil

[@donhanscom7309]

nice video so far but sure as hell doesn't look like its going to be inflatable

[@Andrei.1976]

It's just great!!! tell me, what kind of glue did you use for impregnation???

[@bkscreative]

Not a glue, it's Red resin😊😄👍

[@rodneynormanhersom3583]

the simple thing in life are often the best

[@joenic4303]

Ive been looking for this video.

[@IbmComposite]

Cool idea

[@JOCK532]

What a clever man

[@abbasyaiful7643]

Sangat kreatif sekali ditggu video diatas air

[@imbranjamil4994]

Batambah mantap ni

[@bluebirdfan100]

Clever stuff.

[@seangere9698]

Did you just use butter as a releasing agent? That's actually a good idea when working with wood.

[@bkscreative]

Butter or Margarine 😊😄👍

[@DGAWDGAW]

I wonder why not just leave the plywood glued to the fiber glass to make the hull even more rigid and stronger instead using it only to make a rough mold?

[@andellmcletchie2323]

Nice I want to make one too

[@pakde8002]

The first fiberglass layup I ever saw was for a canoe using chicken fence as the frame. 😂

[@ВладимирКолчанов-р3к]

На боковины сел и ушол 😅 Китай рулит 👍

[@michaelsimpson9779]

Well done

[@yvesveron6431]

Pas de chance au départ mais après belle remontée 😊

[@merendell]

Thats not exactly inflatable but still very clever design.

[@Виктор-м3с4я]

Красавчик

[@samosdolphins123]

very good thank you! how many Square meters of fibreglass sheet did you use?

[@bkscreative]

I don't know how many square meters I use, but I know it in kilograms, I use approximately 5 kg of fibercloth 😊😄👍

[@samosdolphins123]

@@bkscreative what is the white paper you used on the chicken wire before you put the fibercloth?

[@stevevanwig3581]

Very cool boat. What was the release goop on the ply floor? And the paper used on the chx wire? Thus would be a great way to fix old inflatables with dead hypalan . Cheers

[@d-nyy]

bang sampai sekarang masih bagus atau ade rusak boat nye ni bg. pengen buat juga

[@bkscreative]

Sudah lama di jual😄

[@dmitryzhvirblia8053]

Конструкция дна слабая на такой лодке только дома в ванной безопасно, но сама идея фармовки не плохая.

[@dmitryzhvirblia8053]

Если добавить ещё несколько слоев стеклоткани то все будет отлично

[@dhanichannel2529]

Habis berapa kira2 kalau buat seperti itu om 🙏

[@arnaudmiot2351]

Vive les bulles d'air 😅😅 il faut debuller quand ont applique la résine sur le matt ( avec un vrai debulleur), sinon sa provoque des bulles et risque de casse donc risque d'infiltration d'eau 😅😅 sinon bonne idée pour la matrice 👌

[@erichanastacio9695]

If he doesn't have the debubbler (otherwise it'll get holes and sink), he just need to insert several empty 10 liter plastic bottles within the wire mesh. Plastic bottles will keep it afloat. Needs to wrap the plastic bottles in several layers of newspapers so that fiberglass resin won't affect the plastic bottles.

[@Reyesbpescasub]

Excellent

[@sicks6six]

using PVC tubes is a lot easier, you can get them large diameters, like 48' and more, stop ends and bends are available, think about it,

[@Flima0922]

Congratulações guy, good job.

[@Flima0922]

Good evening my brother, I would like to see the second part of the video, how it turned out I intend to make a similar one.

[@Flima0922]

Your work is sensational, I really liked this idea, when I make mine I will place pieces of Styrofoam inside the screen to give it more buoyancy and increase the feeling of security.

[@Flima0922]

My name is Flávio Lima, I'm speaking from here in Brazil, state of Bahia, ok, I've become your fan, may God continue to bless you.

[@bkscreative]

Good idea 😊😄😄

[@derekfearon5045]

What purpose did the salad dressing have when you spread it over the wood have.

[@keithtauber4153]

It appears to be a releasing agent so the fiberglass would come off the wood.

[@grimskal13]

а что болгаркой можно пилить дерево? а если закусит? Что куда отлетит? Болгарка, диск или рука? :-)

[@dmitryzhvirblia8053]

@@grimskal13 на болгарку можно поставить дисковую пилу.

[@grimskal13]

@@dmitryzhvirblia8053 не меняет сути вопроса. Нельзя на болгарку ставить то что может заклинить. А пила очень даже может быть деревом зажата. Палки конечно не страшно а вот че потолще...

[@helmysniper4761]

Cara ngukur papan ttup belakangnya gmna mas

[@bkscreative]

Anda tinggal menempelkan papan tersebut, gunakan pensil atau pulpen untuk menggaris tanda sesuai dengan bentuk belakang perahu tersebut😊😄👍

[@hgezdez]

How could you separate fibreglass from wood? It's impossible. .. never seen this

[@bkscreative]

Using margarin or butter 😄

[@user-toooooo]

😂😂😂педикюрными ножницами порезал сетку😅😅😂😂

[@Pedal2Pixels]

Whats the white stuff before the fibre? is it paper?

[@bkscreative]

Yes 😊😄👍

[@zygmuntkusak3869]

Super

[@isdarvlog]

Hadir bang nyimak...

[@pm1104]

Was that mayonnaise in the packet ? 😊

[@bkscreative]

It's Margarine, not a mayonnaise 😊😄👍

[@northerngm6431]

Is that a Barbie tape measure?

[@jdellis6511]

well done.

[@By-hh3di]

🤩🤩🤩🤩🤩🤩

[@bdProdVid]

Super 😀

[@raytalbot5890]

Should have put the fiberglass on the base so the joints overlapped with a big bit at the front on the second lot put on 👍👍🇬🇧🇬🇧

[@-U209]

Для надежности в балоны, пластиковые бутылки можно было положить.

[@mihailvas206]

Зачем?

[@владвло-ъ4р]

Думаю можно запенить и будет отличная плавучесть вот как транец теперь прикрепить? и дно слабое

[@AlViGachess]

@@владвло-ъ4р Весь каркас, включая дно, можно было делать из сетки.И даже киль можно сварганить. И да, бутылок-пятилитровок накидать в баллон ни сил ни денег много не заняло бы. Сама идея бомбическая, а остальное дело техники.

[@-U209]

@@владвло-ъ4р исходим из недорогих материалов. Бутылки везде валяются, пена как и пистолет стоит денег.

[@dmitryzhvirblia8053]

@@владвло-ъ4р плавучесть и так норм если сильно не грузить, а транец приклеивается стекломатом и смолой , только дно тонковато минимум слоев пять стеклоткани давать нужно.

[@АлександрНекто-ь8з]

Прикольно!

[@xanselmox]

Bravo!

[@py2rpjrubens450]

Well done! Thanks

[@shopcrate5687]

Did you put margarine on the boat 😳

[@bkscreative]

Yes😄

[@Sand45channel]

Kalo bisa pake tulang bang biar kuat pake peralon tulang nya bisa jg

[@안젤로파르디]

Is it all right to work with fiber-glass by naked hands?

[@bkscreative]

It doesn't matter with naked hands, as long as they don't touch the resin liquid 😊😄👍

[@diggy-d8w]

Dear BKS Creative...... question for you sir? do you feel this is a high strength way to use fiberglass & I ask b/c I don't know much about glass. I've fixed a few small cracks many years ago but I've been looking at building a Styrofoam boat w/ glass over it & now I see you using a wire product & that has me asking more questions? Also, could you use foam & wire in the same build? Dumb questions I'm sure but I was here & you seem to know so I'm asking you? Thanks for the videos, peace

[@davidsams2190]

That is not chicken wire. It's called hardware cloth,

[@stormsamed1379]

Üstad sana 1 sorum daha olacak rahatsız edip duruyorum kusura bakma polyesterin yoğunlu kaç olmalı viskozitesi yani 60-100-190 var hangisi uygundur cam elyafa ?

[@sailingeden9866]

What material was the white stuff that you wrapped the tubes with?

[@bkscreative]

Newspaper 😊😄👍

[@robertmcpeak2032]

Not chicken wire. Hardware cloth or rabbit wire

[@SuhidinNiat-qs4hk]

Tanya lagi bang, Abang beli kawat rol ukuran yg 1/4 apa 1/2 lebar berapa c/m ?

[@fumatelauna]

fantastico!

[@borneoisland7039]

Bang itu lem di kawat sama bawah boatnya pake fiber glass sama resin kah dan yang putih sebelum fiber glass itu apa bang kertas kelayang kah

[@bkscreative]

Ya benar sekali, kertas Kelayang atau kertas minyak 😊😄👍

[@webwillie1]

Find some wire cutters.

[@ddoherty5956]

Thats some impressive work, well done 👍🇬🇧

[@bkscreative]

Thank you sir 😊😄👍

[@ZKJWorks]

He just copy my idea he just copy on channel