Black & Decker 12V Battery and Charger Upgrade Guide

12V Battery and Charger Upgrade Guide Video
In this video you will see I rebuild 12 battery with lithium battery for Black & Decker Impact driver. And I also modify the charger from Nicd charger to Lithium charger.
I hope you find something useful & enjoy this video!
I am happy to receive your feedback, advice, suggestions to improve myself.
!!! I apologize for the mistake if I have made in this restoration !!!
**I still keep some parts, I want to save the world's environment**
--------------Thank you so much for Likes & Comments--------------

[@jaedonkanyid3775]

Phenomenal! I am glad that you are modifying the chargers now. Just another touch of solid work!

[@joemama.556]

exactly what we should expect to se on an upgrade video! great job and very clean and tidy!

[@gear_show]

I'm glad you like it.

[@zik316]

Oh yeah, I love these battery rebuild videos. Thanks! [edit] And you rebuilt the battery charger too?! Very cool.

[@user-Vlazzz]

Great job! Now the charger cannot be confused.

[@user-id6mj8uw9b]

That's what talk about. Glat, that author read my comment. Now that's what i call great battery and charger unit repair. Pity, that i can't put two likes. I say again, Great Job sir!

[@trong6124]

The Master Of restoration!

[@dennish.1399]

Just perfectly done! Great job!

[@jovantasevski5157]

I did it and my old B&D drill works better than it was new. Li-Ion batteries rock but BMS module is a must!

[@lalmuanawmamualchin2430]

Most satisfying electronics video I've ever watched.

[@iykemorah]

I am a huge fan of your work project.. I admire the way and manner you go on your work in any project and easy to follow up. Nice one

[@frk380]

Nice sticker swap 👍. Green LED light is vt dim. Replace with bright one.

[@DLDietz]

Very nice mods - Even special insulators for battery post. That LED mod was also impressive.

[@gear_show]

Thank you so much!

[@nadirsaadabi286]

Nice video. I like watching your all video. I have the same impact driver B&D with dead ni cd battery.. I will convert it to Li ion battery just now after watching this nice video. Thanks for this video.

[@SOOONJE]

You do amazing quality work, I am amazed every time I watch your videos♥

[@anhminhlegolas]

I liked the way you modified your charger. What a amazing modification!

[@KNACKSKILL]

Very helpful guide, thanks!

[@zoltannagy3211]

Well done👌👌👌 Beautiful accupack and charger convert!!!

[@gear_show]

Thanks a lot 😊

[@houseman4906]

Nice to convert the charger! Great job

[@lightbatmen]

Excellent. Funny led decoupling. :)

[@gear_show]

Thanks you :)

[@ertugrulyayla1515]

Thank you for sharing, good for your labor. Which (Volt and Ampere) adapter can we charge the serial group 18650 batteries with 4S and 5S BMS? For 4S to 16.8V - 5S to 21.0V, the min. and max. If I can learn how many Volt and Ampere values it should be, I can choose from the adapters I have.

[@blagosavic4454]

Svaka čast! Great work!

[@Dovakinzskyrim]

Yeah this is a great job. Thanks for video, from Ukraine!

[@manalojosegabrielm.7704]

Just a tip, you may take it or leave it. Twist the wires after you strip it, so it wont fray. Also, tin the wires before you solder it the metal terminal.

[@keithspencersr.6806]

Outstanding job

[@doronbarshap1743]

Amazing work. Kuddos !!!

[@shalashaskasaiz]

Awesone...! Just 1 question... ¿In case the normal charger was working good is not compatible anymore with this kind of battery is it?

[@70_T_N_70]

watch over and over again still like 👍👍👍👍👍

[@Levisgil47]

Hello, thank you for this great video. Could you tel what sheet of metal did you use to make the connectors ? Thanks

[@mrbricolage803]

you are a magnificent maistro, all you need is to put the links of each device that you use in the videos to help people, thanks for everything

[@jasonsharpbucks]

Just not amazon links no one wants to shop there anymore

[@pramodravula138]

I'm a Huge fan of your work, I love the way you present your restoration and it means a lot to us when we are in need of such DIY restorations. My only request is to see you restoring a Table Fan and making it run with 12v Bosch powertool Battery and an 895 DC motor, so that it could serve as an emergency fan in times of power outages who's is very important for fathers of small babies like me

[@user-dc4ie7lh9u]

ססס

[@juancarlosrojas5739]

Excelente video, hermoso atornillador black and decker, quisiera saber un poco más de tu computadora soldadora de punto, veo que la utilizas también para soldar tarjetas electrónicas, donde la puedo conseguir?. También me intriga saber un poco más de tus arreglos para saber cómo van las baterías de litio en el circuito, eres un gran maestro, sigue así, saludos desde México.

[@rhyleyhooper9254]

Mll

[@prasadvn524]

Nice video.Good that the charger is also converted.Are the batteries special category for power tool use.

[@muradinfinity3939]

This work is very and useful

[@sammytammy2921]

VERY informative video. Appreciate if you specify the battery specs to use.

[@francobenedetto6965]

Complimenti, bellissimo video chiaro e professionale, ottimo

[@Tamichael]

Your creator so amazing!

[@orlatris96]

Parabéns por mais um excelente trabalho. Por favor, poderia aconselhar-me quanto a que células 18650 devo usar para um trabalho idêntico ao seu? Obrigado

[@Aoa2005]

you do everything Super👍 what is the name of glue and where can I buy it???

[@bomche115]

great video . thanks bro

[@thakoraditya1343]

Black and deker maded quality products and easy to repair 👍

[@gfrankum63]

They used to be good, but now all their branded tools are subpar. Of course they also make DeWalt tools, so it's not a big deal to them anymore.

[@hsinus666]

It's great also to explain the difference between the first 40A BMS and the second small BMS 3S of 20 A

[@DaftOldMan]

I made a video about converting a 12v NiCd to LiOn weeks ago. It got 18 views. Your video got 36k views in 2 days. I must be doing something wrong. Yours is a lot better than mine though.

[@kimsaarikoski2629]

What kind of a charger did you have and from where can I buy it. Well done modification.

[@alialmutawa6443]

Quality job

[@johnwright6706]

Did you secure the charging board in the plastic housing at all or is it just floating in there? Also, how does the battery life stack up against the old battery or OEM li-ion batteries?

[@DatBlueHusky]

battery should last 2-3 times the original

[@chefkdowg]

Man I need this done to my old makita drill.

[@user-xe2ko9pr4g]

Привет из России ! Мужик, ты мега мозг! Респект тебе!

[@francobenedetto6965]

Hi I saw your video I wanted to compliment you on the professionalism and clarity in the execution, could you kindly tell me what kind of lights for the charging lights you need. Thank you in advance bye

[@unnikrishanan6290]

Great job

[@bquedenfeld]

wow finally found what i was looking for I have a24v i want to change to Li ion battery and charger need help with battery's BMS and charger

[@gamesandroid4990]

Excellent job, I am following you from Iraq

[@gear_show]

Thank you!

[@FantomZap]

Nice job

[@user-zq7kh9bq5c]

Ты молодец. Я бы тоже хотел чтобы ты на моем шуруповёрте поменял батареи. Респект тебе.

[@user-zq7kh9bq5c]

Хорошо творит

[@bobby6866]

thank you sir👍👍👍

[@user-dw2xq4ky8m]

좋아요 당신은 훌룡한분 입니다 감사합니다

[@leonardoserravalle1967]

I see all your videos and they seem excellent to me. I only have one question: in this configuration as I understand the balancing of the batteries is not contemplated, that BMS balances the load? thanks for your answer

[@E-hab]

The BMS should take care of that.

[@user-ig2uu7gp6k]

Отлично получилось!

[@skimney_pit8035]

Ohh hi. I always watch your videos. I love it so much

[@gear_show]

Hi, Thank you so much 😀

[@skimney_pit8035]

@@gear_show your welcome.

[@SonomiGVN]

Good job :)

[@felixpeters4319]

Could you also upgrade the Powerstation, that it loads 12V/18V Batterys with 12V Input from a sloarsystem? It would be awsome to install in my Van.

[@user-kt2hb8xr3p]

Thanks 👍👍

[@nathantaylor9998]

Could you show us how step by step to rebuild a battery pack for an 18v lithium ion makita? Mine are failing all the time.

[@taimurkhan4300]

Very nice sir

[@antoniomartin8172]

With that 20A bms it is impossible for it to work. Can you explain how you do it? do the test with the battery open that the BMS can be seen

[@madvelila]

very good!😊

[@rakeshbala9328]

Legend

[@rdyoutube4715]

Auf keinen Fall so nachmachen! Lebensgefahr und Brandgefahr beim Ladegerät!

[@cmtdao8125]

Anh nên học cách hàn thiếc đi!! Mối hàn nhìn xấu quá!! Với bôi mỡ hàn nhiều mà ko rửa lại bằng xăng thơm sau này mối hàn sẽ hen rỉ

[@chongshenchang9367]

Sir, maximum how many cells can we connect in each parallel pack for 3s 20amps BMS..?

[@SergioGonzalez-vo3wx]

Like my friend 👍👍👍

[@profharveyherrera]

So that's how you change from NiCd yo Li-ion. I'll give it a try, have a nice screwdriver which needs a new battery pack and I can't get old NiCd ones

[@maximoaltesalteshinojaltes4575]

26

[@nilsonamaral]

How could I adapt the original bosch screwdriver charger to charge the lithium batteries? Grateful!

[@luifernandi]

Where do you buy the BMS from?

[@MuhammadDaudkhanTV100]

Best of luck

[@nezojunior7940]

excellent work i leave a hug here brazil

[@frank-t6857]

What is the brand and model of the battery strip welder?

[@ekim955yt]

Nice

[@persioboni9373]

Uma maravilha.

[@jeanerojp3944]

Gracias

[@MuhammadDaudkhanTV100]

Good

[@nicolamuzz9385]

hello! great video, i signed up! do you think a 30A bms is enough for a 20v drill?

[@CBGarage]

No bro it must be a 40 amp bms

[@70_T_N_70]

Make a cleaning video for the BLACK & DECKER 12v screwdriver

[@LuisCastillo-gr3ok]

Tengo un taladro igua y tengo el mismo problema con la vateria boy hacer lo mismo saludos desde panamá👏👍🇵🇦🤷‍♂️

[@mustaphaezhar2995]

I used the same bms 3s 20a but i found a problem is it can not drive drill motor. Why?

[@renatoc.1235]

can I use the same charger? Thank you

[@boueng]

I saw that the plugs have flat contacts. Do I understand correctly that you are either from the USA or from Canada? And thanks for the video itself!

[@gear_show]

This tool is from Japan. Thank you!

[@boueng]

@@gear_show and you? From Japan 🇯🇵 too?

[@tosinomoyelu1874]

Wonderful video but BMC connection to the batteries are not explicit and detailed it happened to quickly one could catch the proper wiring connections

[@dragomxsoldier]

Where do you buy your batteries?

[@viciriucandreea5835]

Ok felicitari

[@weryfany_Zamosc]

Ten BMS 20A to tak dla reklamy chyba bo sam taki testowałem i jest za mały. Ale publiczności i kit można wcisnąć.

[@ricardodiaz8322]

Sólido video sensillo y eficaz

[@kristopherdavis5824]

I wonder if hes converted the old black and decker wired drill

[@embeddedmicrocontroller]

Wow

[@user-gs7qf9ew6r]

👍👍👍

[@norbithehun]

Many thanks for your videos. Where can I buy original Sony VTC6? Could you give us a link? Because I have bought bench of them from AliExpress, but all of them were fake ones. Thank you in advance.

[@gear_show]

You can try it from this link detail.1688.com/offer/550188755852.html

[@alexpetroff5633]

👍👍👍👍👍👍👍

[@vicentejrlagura6416]

Hi sir, im not a expert in electrinocs i want to DIY only,,can you give the process how to connect connect the battery of diagram please.Thank you very much

[@RyeOnHam]

Great job. Does the BMS have a low-voltage cutoff?

[@user-id6mj8uw9b]

yes. low voltage, and high voltage cutoff. some of these have temperature cutoff, but there are thermistor required.

[@hsinus666]

@@user-id6mj8uw9b You can grab it from old laptop batteries

[@tamirci3577]

Thank you for sharing, but I couldn't succeed even though I tried many times. I researched and found out that the bms circuit does not work because of short circuit current protection. Could you please help me choose a bms circuit? (4s and 5s)

[@gear_show]

You can buy the same BMS I used.

[@njoeditie406]

i tried it too, but it runs half a second when i push the button....what went wrong?