How to make lithium Battery charger using BMS 3S 12V module

[@zerodivideme101]

Dari sekian banyak, video BMS 3S cuma di video ini saya benar2 paham cara pemgaplikasian BMS 3s, terima kasih admin

[@ElektroNad14]

Senang anda menyukainya

[@JOHN.WICK.818]

Sama, saya juga paham di video ini, terus berkarya 🙏

[@thatphon1950]

​@@JOHN.WICK.818พพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพำพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพพ

[@AndriSayur23]

Kebanyakan lainnya bertele2 dengan gbr segala

[@Dash10ism]

Superb, Best way' to teach without single verbs ❤

[@alittlescience5739]

ধন্যবাদ আপনাকে আমি এই BMS টার কানেকশন বুঝেতে পারছিলাম নাহ, আজ আপনার ভিডিও দেকে শিখতে পারলাম।

[@Onlineshop286]

mantaap dan kereen lanjutkan bos ini baru tutorial yg cerdas saya like 1000

[@bopunsu]

Always check each cell's voltage. Add an active balancer will protect all cells from overcharge damage

[@sunarsoaso8625]

Mantap bang jadi paham penggunaan BMS

[@ElektroNad14]

Terimakasih

[@idewongkreatif685]

Yang seperti ini yg harus di coba dan wajib di praktekan.. senang dan SEMANGAT terus bang...sukses buat abang

[@ElektroNad14]

Terimakasih gan

[@idekreatifchannel.123]

Joss

[@idewongkreatif685]

@@idekreatifchannel.123 semangat

[@user-dw6fj1py1o]

@@idewongkreatif685 sure.

[@saskaraharry6950]

Yes , i am understand now!!! Thanks for share it 😊

[@ElektroNad14]

Glad you like it

[@billgwilliam1263]

Very informative, I understand the function of the circuit board alongside the battery now. Nicely explained 🤔

[@FUNKYSTATORS]

God job Nad, well explained for beginners, 👌😉

[@electroumit]

No good job. No have cut-off circuit.

[@AndriSayur23]

Lebih mudah dipahami klo satu persatu 👍

[@AndriSayur23]

Mantap ,sangat mudah dipahami👍

[@ElektroNad14]

Terimakasih

[@สัญชัยจันทร์เต็ม-ฌ7ง]

ดีมากเลยครับ ดูแล้วเข้าใจง่าย ขอบคุณที่ให้ความรู้👍👍👍

[@idekreatifchannel.123]

Mantap benar kawanku

[@moemattar]

Thanks for the explanation for the simple explanation this is really confusing for beginners especially this ones you buying them with no instruction Thank you

[@darkknight145]

Should have used a buck regulator with current limiting adjustment. As it is, if the batteries were actually flat (yours weren't) the charge current would possibly be very high and blow up you buck regulator or the batteries. This is possibly one of the reasons there are so many Lithium Ion fires.

[@kasach40]

Спасибо!!!! Всё очень хорошо понятно!!! Удачи вам в работе!!! С меня подписка и лайк!

[@ElektroNad14]

спасибо вам большое

[@nazirmasih8684]

Very nice vedio.بھائی صاحب بی ایم ایس لگانے سے بیٹری اوور چارج تو ہونے کا خطرہ تو نہیں ہوتا

[@mangjay80]

Yes jernih sekali

[@93556108]

An awesome and simple connection and thank you

[@sukhdevthakur5989]

Excellent excellent excellent

[@ElektroNad14]

Thank you

[@tahan61av]

True, but I think you should use the automatic charging parts charger when the battery is complete !!

[@majmaldcinformation]

Very nice video thanks 💯 sr good

[@farjamazad9759]

Hi engineer Batteries are damaged by soldering A spot welding machine must be used

[@hasantamer9199]

good luck sir

[@KoushikBanerjee-sr9hw]

Bro i understood ❤❤❤❤

[@kennmossman8701]

The BMS in the lithium battery is for the battery protection of low voltage cut out, excess current turn off, over charging protection. It is mainly for preservation, not charge management.

[@Once_in_a_Lifetime]

So what your saying if the bms doesn’t specify cell balancing then its just for charging and discharge management? I have a charger that has variable voltage and current settings and over charge protection so I’m wasting my money because i can always put a fuse to protect the device against excessive discharge current although i wouldn’t have undercharge protection shutoff other than installing a voltage meter.

[@kennmossman8701]

@@Once_in_a_Lifetime Take a step back. There are 3 stages in charging a Li-ion battery; the first two are CC and CV with a defined transition point. A proper charger does this. NOW does a BMS do this? Hint the answer is NO ! You can drive a screw in using a hammer but that is stupid - so is using a BMS to charge

[@Once_in_a_Lifetime]

@@kennmossman8701 I pretty much wanted bms to balance the cells, as you said a good chargers handle the current and voltage settings and protections. I’m just getting into this now and just using slightly cycled batteries to learn and having removed the bms that comes with modules i didn’t know how important cell balancing would be as i picked up a variable charger that can handle the charging requirements. Guess i’ll find out!

[@3DSomething]

@@Once_in_a_LifetimeI’m pretty sure that the BMS is not for charging. I was confused too. But now I know if you use this BMS and you do need a lithium battery charger to charge the battery pack.

[@MicSokol]

It is used for charging when batteries are used as a pack, even if they are used this way all batteries MUST be at the same voltage before first charge. You are right BMS can not be used as a charger in this scenario.

[@seharrubab9441]

Sir bms ke output me jesy hi step up module laga raha hun volt 0 ho ja rahi hy kia issue hy smjh nhi aa raha hy please hal bta den 3 bms Change kr ke dekh liya hy

[@talalalanazi-q4n]

How do you know that the battery is full? Does continuous charging affect the battery? 🙇

[@AhmadAli-sw3ur]

Kia 6 cell use kr skty hn 10 ah k sakty hn ?

[@kumaridhanthe5779]

Tq all friends

[@MGG_Network]

mantap bng, lanjutkan coba bng tambah indikator level baterai pengambilan +- drmna yah ??

[@jumbo999614]

Best tutorial. Easy to understand.

[@ferozshaikh9054]

Sir is battery ki 12.60 v dena hai 12.06 maximum charg k liye 3s for

[@ElektroNad14]

12.6V = 4.2+4.2+4.2

[@shahabsiddiqui8530]

Good

[@BienvenidaEltagon]

It is ok to use 19v adaptor for charging?

[@ElektroNad14]

it is better to use 12.6V

[@KRACK.561]

How long does it take for full charge

[@ijanckbc6084]

Apakah jika tanpa step down, bisa langsung di sambung ke adaptor 12v 2a?

[@ArchAymanGaber]

انا اشتريت دائرة شحن bms وركبت عليها البطاريات لما بوصلها علي الرسيفر بيشتغل بس مش بيجيب إشارة ايه المشكلة ممكن تكون

[@ramanavenkatamadala5543]

Completed wiring perfectly alright,on BMS,3స్,20A module, values are perfect but at out put getting 7.7 V only. What could be the reason bhai?

[@RixtronixLAB]

Cool video, well done, like it, thanks for sharing it with us :)

[@ElektroNad14]

Glad you like it, thank you

[@amal-wp7ek]

Sir can we use to charge a 12v 2 ampere adaptor direct to the battery. Is any problem plese reply

[@paramhansjiddanand1032]

So you don’t have a 12v lithium battery automatic charger? That charger will charge the batteries without extra module and thus save power.

[@thantunzaw3059]

I don't have step down module and my 12v Charger output is 13.2V. Can use that BMS with 13.2V intead of 12.6V

[@carlossiles7702]

No. It has to be a special charger (i.e. XL4015) that has constant current (CC), constant voltage (CV). You cannot use a normal 12V or 13.2V constant voltage power supply.

[@Rajjzvlogs]

You can because bms also has battery over charge protection and low protection so you can use

[@gregostudio]

@@carlossiles7702 in the video you mentioned xl4005. why xl4015 now?

[@mahmoodalhassn3872]

Hello, can the same method be applied to two batteries only to get 7.4v using this piece..thanks

[@anouarlagzouli]

نعم يمكن لك دلك بضبط شدة التيار من خلال XL4005 Step down

[@vijayyyyyyyy6yyyyyyyy]

Can we charge battery and yse load at same time

[@sahityabodra1412]

Bms will support 12v 8 amp??

[@MrNeboff]

you will need to check the bms ratings . the answer is yes

[@nadeemtariq1344]

Very good

[@PlacideBolack]

can we charge this kind of pack with ISDT Smart Charger without use balance plug ?

[@igorbetablack5865]

Queria saber se posso pegar uma bms 3s e carregar baterias de 2s e 1s. No caso 1s usava uma fonte de 5v na bms 3s ou teria que ligar ela nos 12,6 na minha opinião acho que seria nós 12,6 porque cada celula carrega com uma voltagem específica, estou certo?

[@كنمبدعا]

What happens if a 12v charger is used?

[@maatiraouki5183]

Avec mes remerciements pour l’exercice

[@Z4BIB1]

Ada gak charge dan bateri digabungkan untuk hasilkan 12v. Saya mahu membuat projek akhir dan projek saya itu menggunakan charge selalu dan saya ingin menggunakan bateri juga untuk kecemasan jika elektrik tiada. Saya memerlukan 12v untuk solenoid lock

[@elromanicobaby]

Will this bms work for a 3s 8p configuration

[@gregostudio]

i have a nikon en-el4a battery it is 11.1v 3s . My logic follows that if i opened it up i would find a similar bms board inside . In order to charge it with a smart charger like imax i assume i just need to connect the positive and negative terminals?

[@rajiabdulrahman5646]

If BMS is connected to an inverter that is not in use, will there be energy loss in the battery?

[@diandanuarta199]

Pang pas cas apa tegangan dari batre ga balik lagi ke casan ?

[@niteshkumawat]

Mene 3s bms board pe connection sahi kia h but output nhi mil rha kya kru plz batao

[@thao976vlog6]

Bộ sạc pin 12v ,3s này là rất ok

[@razanolafamily2717]

Module XL4005 nya punya fitur over charge protection gak ya gan? Sama lampu indikator itu sebagai indikator sedang charge/full bukan ya?

[@Semar-sr3iv]

Apa di BMS nya sdh ada lampu indikatornya? Trm kasih 👍

[@ElektroNad14]

Tidak

[@MinhLe-hb6mi]

thank you

[@yangyiaung5858]

Thanks

[@mostakimbillah4890]

thank you for details explanation ❤

[@ElektroNad14]

Glad you like it

[@bhagvandaspatel9396]

Module kanha se kharide bata do na sir

[@htimedia3251]

Nice

[@amerchetok9935]

Mau tanya bang. Adaptor cas bor corldes kan 21v - 48v arus output nya di keterangan. Dan ada lampu indikator jika penuh. Kenapa saya pake untuk cas batrai pack 24v kok pampu di adaptor tetap hijau dan tidak tercas ya. Saya ukur tegangan baterai pack 19,1v . Mohon di jawab bang 🙏

[@sindumanyapu2501]

What is the price to do this battery Does it useful for EV scooters... Please letme share

[@danialtun5431]

Now showing 18650 battery 3pcs to 12v . 18650 battery 6pcs to 12v how to connect Mr. Please

[@mdrobel-eb5rc]

আচ্ছা ভাই ১৮ ব্যাটারি দিয়ে ১২ ভোল্ট প্যাক বানানো যাবে

[@suryapatnaik5720]

Is there a way to add led to indicate full charge??

[@enginozkan7268]

Use XL4015 instead of XL4005. Choose XL4015 which has full charged led version.

[@Semar-sr3iv]

Trm kasih ilmunya bang... apa ini sdh auto cut-off ya

[@ElektroNad14]

Iya, sudah ada Auto cut offnya

[@tab_use]

bms not working different V on each battery ?

[@HabibHabib-mn9xb]

كان بإمكانك استعمال شاحن 12 فولط مباشرة بدل من استعمال شاحن 24 فولط ثم استعمال module 4005

[@agnazmi7837]

Bang, kalau saya guna modul charger type-c sambung step-up ke 12v, kemudian ke bms bateri bisa gak bang ??

[@maatiraouki9124]

Merci beaucoup pour l’exercice

[@c.eldorado]

Thank you for much !! Its very cool !

[@ElektroNad14]

Glad you like it

[@bohemiansoul584]

Isko charge kaise karenge 12v banane ke baad??

[@realinformationalvideos]

2200mh × 21 pc 12V this ket charging is possible

[@kandarrusmana6849]

kl adaftornya pake carger Hp bisa ga Gan .

[@sanjeewajayasinghe1299]

How long does it take to charge?

[@Once_in_a_Lifetime]

If you know that then you know the status of the capacitance of your battery by determining how much current it took from total discharge in X amount of time.

[@nnejiamaechi9385]

Interesting though not too Clear yet. Same way csn ,,,4s be used to make 16n charger,,

[@aryrisnajar9648]

Bang bisa ga kalo Dc conector nya ganti pake yang kaya type C gitu???

[@nnejiamaechi9385]

Good. Can one make 16,v with 4s bms,?

[@nnejiamaechi9385]

Ans pls

[@Taman.LingkaranBambu]

Maaf ni pemula mau nanya. Apa bisa rangkayannya ini di charger pake adaptor 12v 2,5 amper. aman ga atau ampernya terlalu besar

[@ElektroNad14]

Boleh,

[@li_one2177]

Kalo adaptor 12 volt 5a bisa nggak bang?

[@akdgamer1065]

@@ElektroNad14 maaf no pemula

[@mahmoodalhassn3872]

Hello, can the same method be applied to two batteries only to get 7.4v using this piece..thanks

[@akdgamer1065]

@@mahmoodalhassn3872 yes

[@levilaczo8780]

Please use a spot welder

[@ElektroNad14]

Thank you

[@k4u5upr4t4m4]

Kalau buat lipo aman cara ini kah?

[@eijikong1660]

is it safe to charge while the 9v led is plugged in?

[@BuluBuridSMDA]

Not safe

[@kinetic4644]

thanks, total amp. out?

[@sahityabodra1412]

Bms buy link d do plzz 😢

[@fransiskasaragih4457]

halo, saya ingin bertanya: kalau misal ingin dicharge sambil disambungkan ke lampu apakah bisa? caranya bagaimana ya? Terimakasih

[@rameshb9525]

After charging , each cell voltage was different.

[@sergeypetrov1358]

Не дозаряд двух банок,это и говарит о не правильном балансире

[@SeregaKulibin]

У меня такая плата вообще не запускается. Придется пока её отложить и заряжать в Imax6. Но тут проблема, чтобы не высадить аккумуляторы ниже 2.7В. Использовать буду в RC модели.

[@Bobyboy-f5f]

ini maximum keluaran amperenya berapa ya?

[@suranjondaring3316]

very nice.

[@RajivgandhiRajivgandhi-m3w]

12 old board project use pc547 transistor

[@SsaliGeoffrey-ct8bk]

Can't it work without bms?

[@DiversificationPlus]

You can use a charging module with 2 batteries wired in parallel...without protection you will overcharge the battery and damage them

[@merlinomerlino]

Ciao hai un link per le batterie. Ciao e grazie.

[@abbyysingh]

How much amp need to charge if i add 2000mah battery to make 12v 12.6v to charge and amp? Plz tell sir

[@kennmossman8701]

12.6 V is too low what battery chemistry over what time frame

[@abbyysingh]

18650 lithium ion battery (3.7v each)

[@kennmossman8701]

@@abbyysingh Read ALL of my questions

[@AlexAlex-bh8fi]

Now how to charge them?

[@hanymagdy2095]

May God enlighten you, we need a hand from you to complete the shipment, and I thank you

[@ElektroNad14]

Glad you like it,