BLACK DTF POWDER VS WHITE DTF POWDER | How to use Black and White DTF Powder | Yamation

[@CraftableThings]

they both look amazing!!!

[@AngelBDesigns]

Thank you ☺️

[@cassandrarobertson6579]

For your prints how did you print them? Did you use sublimation printer or inkjet on dts transfer film? I did not see you powder the ink to cure but you powdered the back. Maybe I missed a step

[@kelenmartins1455]

Can you please update us how it looks after a few washes. Thx

[@denisebeason8846]

They both look great. When would you use the fine or course?

[@leroycurlin]

Angie, I think the white looks better.

[@ivyleung2446]

I tried using black powder on the striped dress and it performed well. Using the white powder still sees the stripes of the dress on the pattern, but the black powder will not let the stripes of the dress be shown on the pattern.

[@thejaydensmama]

Can you use the black DTF film to create a DTF on a black shirt if you do not have a DTF printer? I use the DTF hack with my sublimation printer.

[@marcyfarrell5369]

I think they both look great

[@MzDee418]

Hello Angie, I’m a little confused. It seems like you put the power on the back of the image instead of the front (on top) of the image. If you are placing the powder on the back of the image is the image mirror? Do you mirror in both Cricut and the sublimation printer of just the sublimation printer only. I tried the white power but placed the power on top of the image. Also what’s best for the second press…. Teflon sheet or parchment paper. Thank you for your time and your teaching.

[@michelesol5425]

I could be wrong, but I think it is because she is using a DTF printer. 🤷‍♀

[@TamiT3]

I have a DTF printer, and the software with it does auto mirror. It must be mirrored. The powder goes on the side it's printed on. You add it to the back side, not the shiny side. It must be powdered quickly after print, so it will stick to the wet ink.Hope that helps.

[@RaulGarcia-kr4mx]

These are full cotton sweaters? If so all I gotta do is add the powder cook and press?

[@kingdreblackpanthafammily5755]

Using a dark shirt I don't mirror only on white.I got the black powder I'll let y'all know how it goes.

[@Dlulep]

Using this does sublimation show up on dark colors?

[@fatboyswagg74]

i have the sawgrass sg 500 and a cricut explore 3. i noticed the back of the image on the paper was white where u poured the powder on. how did u get the back to be white like that?

[@cindycunningham8566]

She's using a dtf (direct to film) printer, which has white ink.

[@lynettawood5232]

Queen Thank you for sharing they both Pop

[@baebegirl1]

I d sublimation dtf so will the black work for that on darks

[@elainelee8374]

Great job as usual. I like the color on both. Would you share which heater you are using please!?

[@yolandagorsline3590]

So beautiful. What program do you use to create the designs and customize it. I have been wanting to recreate my own version of the coffee one.

[@DempsDesigns]

Both look amazing!

[@theasyper5298]

They Both look good

[@AngelBDesigns]

Thank you ☺️

[@harlemsfinelady]

They both look great

[@mikeledee8786]

I thought when you dtf on black shirt with white powder the image is faded but yours is good, how is that?

[@stephaniemartin3419]

I love the color totally amazing

[@jennieallende4258]

the oven you put it in.??? can u share the link or name of the oven please thank you

[@SheWritesHerJourney_]

Amazing job, they both look amazing 🔥🔥

[@AngelBDesigns]

Thank you ☺️

[@sheri8471]

these are beautiful

[@ericrumlin7633]

What curing oven do you use can you give the link please

[@AngelBDesigns]

I use the the Procolored oven that came in the bundle. The link is in the description box

[@TheCreativeMate621]

Hi, Can i use Epson 2850 for the dtf printing on dtf film?

[@candicraftycorner]

Hey lovely I wanted to ask did you use sublimation ink when doing this? I’m wanting to do this without having to lay white htv down first ❤

[@AngelBDesigns]

No I didn’t. This is DTF

[@candicraftycorner]

@@AngelBDesigns 🙏🏻 thank you, also what would you recommend when doing a custom fleece blanket ( sublimation DTF OR TRU transfer paper? Thanks again 🥰

[@joerollings6219]

Hi! Can you used the black power on dtf-hack?

[@emaraldsanchez6674]

How do you get it to have a all white background

[@cristinadrozd]

Yee can someone answer that

[@dianeandrew7505]

For the dtf sublimation hack does it have to be 100% cotton?

[@helloauie]

Hi can I use epson converted sublimation printer and follow these steps?? Thanks in advance...💕💕Im in middle east and cant use transfer paper due to very hot water inlet.. hope anyone can help.

[@AngelBDesigns]

Yes you can. It’ll just be the hack version

[@MariaOrr-si3dy]

How did you do that on a black shirt when i try it comes out so dark like black even if the image in bright. What am I doing wrong or what do you use to do this on black shirts??

[@lovn_mii_2]

What brand of paper did you use

[@syndifife114]

how do they look after a couple of washes?

[@lynnewade2869]

I would like to know also!

[@SusieReyes-w9g]

what if you just want to print a bright white on black what would you use if i use the black powder i feel my white looks grey

[@goldmind3006]

are they sublimation prints?

[@felixmarcury6535]

Hello I’m new and I really appreciate your job. I want u to help me please cause my DTF A3139 printer works correctly in white t-shirt but not for black t shirts could you help me please ?

[@felixmarcury6535]

Sorry my printer is A3 1390 dtf and my app is procolored

[@clmcustomdesigns]

I did the white on a black t and the colors didn’t pop at all I got Yamation from Amazon it so is the medium different?

[@stephaniemartin3419]

Can you use this powder if you don’t have the heating machine like you do

[@almatho1]

So on the printer, can I use a sublimation printer to that? Or it has to be a dtf printer? Thank you

[@deidrajones5504]

Hello I have tried to use the black dtf powder on an image to put on a dark shirt but it turned out tone to tone. what is your trick?

[@vanessagonzalez1210]

what dtf printer are you using please

[@d.j.a-plus4648]

What printer are you using? Also nice work looks good.

[@reneemickens6653]

I’m glad I ran across your video, do you have to trim or cut out or did your image print out already cut around the edges. Or with dtf you don’t have to worry about cutting

[@StreetCornerFilmsAndTV]

Helllooo

[@janetlewis1425]

What size paper are you using they look great

[@AngelBDesigns]

I’m using 8.5x14

[@sarahford4282]

What is the pack u get please???

[@sewlittle1]

Did you use a regular color sublimation match for this, I noticed the pattern is completely white when taken out. Just trying to learn the correct steps for this process. I was told I need a specific printer that prints white ink.

[@AngelBDesigns]

This process is DTF. And yes you need a Dtf printer to do it.

[@sewlittle1]

@@AngelBDesigns where could I find a DTF printer, or do you sell prints with DTV.

[@alwayzblessnme]

You can also do using a sublimation printer with the same steps, and it comes out just like using an dtf printer. The images last with washes as well.

[@cbrown2006]

@@sewlittle1 why would you need DTF powder if your using a DTF printer?

[@bethbrightman1326]

the powder is the adhesive that makes the ink stick to the cotton fiber so that it lasts. @cbrown2006

[@CraftableThings]

Hey boo! Sorry, I missed your premiere 💕

[@fatboyswagg74]

how did u make the back of the image white?

[@jamiearp6429]

That is what I’d like to find out? Did you ever get a response from her?

[@AngelBDesigns]

It prints out that way when you use a dtf printer

[@fatboyswagg74]

@@AngelBDesigns oh I have to have a dtf printer instead of using my sawgrass. Ok I got chu

[@farreldebaltzo]

@@AngelBDesigns Will it print with the white image backing if you use a DTF Epson hack? Because if THAT'S the case, I'll just convert my Epson EcoTank to a DTF instead of sublimation! And skip ALL the vinyl nonsense if I can.

[@stellavip15301]

How do you get the print so large

[@DJV0ICE]

I'm curious how's the hand of the material is it heavy or does it feel like it's vinyl or actually apart of the shirt? And also definitely feeling the one you used the black powder on..

[@jacquelineponyard6504]

×hen you make the shirt with the black dtf powder, was that image a regular image on dtf paper or what *

[@dinkbaby9563]

did u have to use a white background

[@stepheniebetzel2632]

How do these wash?

[@summerclark6001]

So did it print white on black?

[@cardinalorganic-waxhaw]

Hey Angel...I'm new to this...are you printing to vinyl like Sisers Easy Subli? Then why use DTF powder? I'm trying to use the powder but trying the hack with my sawgrass..but I'm missing something?

[@bscdesigns37745]

She's using dtf printer

[@kerryjepp8269]

What's the difference with the powders? Fine, medium, course??

[@kellyparedes7151]

Hello , what software are you using ? I am having issues with my prints coming out with not enough white on top of the image although I have selected 100% white. I use RIP ver 10.01 . Have you encounter this issue ? Could you do a video of what software you use and the settings that you utilize pleaseee 🙏

[@AngelBDesigns]

I’m using the pro rip software from Procolored

[@lindahudson4949]

How did print your pictures. Video makes it look like it’s reversed but not understanding how the powder sticks.

[@ebonyailsworth]

Is that a cotton or polyester

[@tiffaniwillis4226]

They look great!! Which dtf printer are you using?

[@kellyparedes7151]

Hello , where do you buy your dtf ink from to refill ?

[@AngelBDesigns]

I’m using the DTF ink that came with my printer. So far I haven’t tried any other ink

[@allthewayrealtygroup8835]

Did you use sublimation ink for this project?

[@AngelBDesigns]

No, I used DTF ink

[@DempsDesigns]

Are the images from CF?

[@AngelBDesigns]

I believe so.

[@kingdreblackpanthafammily5755]

With the white powder on a black shirt why didnt the black coms thru the image?Thats my problem whrn using dtf on dark color shirts

[@rosecurrier]

Are the shirts 100% cotton?

[@joeflower7398]

awesome

[@renatadavi7649]

What if you dont have an oven to bake it

[@AngelBDesigns]

You can use a heat press. Just hover the plate over the image

[@tracydao610]

Why did yours print out white compared to others I have seen on film? I’m genuinely curious!

[@bethbrightman1326]

She has an actual dft printer as opposed to a sublimation printer. Dft prints a layer of white on the back of the image. That is why she's able to put it on black without having to add a base layer of white vinyl to the shirt first.

[@shawnb3951]

Thank you! Finally an answer.

[@natashafreeman6286]

Beautiful

[@AngelBDesigns]

Thank you ☺️

[@gailcarter2182]

I used the Welacer black powder on a black shirt, and everything turned out black.

[@melissasoto9365]

is that an actual dtf printer your using?

[@dbrimmage237]

Why are you applying the powder to the adhesive side rather than the inked side as seen in numerous tutorials for dtf applications?

[@kingdreblackpanthafammily5755]

You don't have to flip when using dark shirts so the powder goes on the back,That's what I think. I had the same question

[@allthewayrealtygroup8835]

By the way, both are very nice.

[@craftingwithmrs.g5988]

Both look good. So you put the power on the other side not on the print side

[@AngelBDesigns]

The powder goes on the side with the ino

[@kirstenmichaels6794]

Comparisons usually work better when using the same image

[@lilsmiley16840]

I'm confused, i've seen the powder being poured on to the top the printed design, not on the back. how is it wet on the back?

[@AngelBDesigns]

That’s how it prints out. Which DTF printer do you have that the image prints backwards? Ive never seen it any other way than this

[@AngelBDesigns]

How do you press it to the shirt if the powder goes on the top of the image? 🤔

[@keylaorozco6970]

I was confused too, I've never seen it putting the powder on the back of print.

[@cassandrareed5959]

I like them both🧡

[@joycenolin148]

Mine comes out clear from printer doesn't have white on back why is that

[@stacyhayes9843]

From a DTF printer, or regular ink jet?

[@tegancheney1627]

Which do you like better??? DTF Transfer or Sublimation???

[@AngelBDesigns]

I definitely like dtf better

[@zacheetheophin7963]

Your video confused me. Not enough information, what kind of printer did you use during this process?

[@joycenolin148]

Am I printing wrong side

[@mistyplatt-chapman1282]

I’m late to the party, but…..I see no difference here….They both look great!

[@KevinAndrews-d7v]

Would have rather seen the same design done in each powder.

[@foreverraneidaze]

That would have made more sense to really see the difference. I’m still confused after watching the video 🤦🏾‍♀️

[@BelieveHer]

❤

[@sfpuppyraiser]

you should have used the same design

[@SandeeJackson-r9n]

The white pops more to me.

[@TravelwithEvette-zf4dc]

I CANT TELL

[@scott8193]

why wouldn't you print 2 of the same design for equal comparison is beyond me smfh

[@AngelBDesigns]

You go ahead and waste your money making 2 of the exact same shirts 😆

[@scott8193]

@@AngelBDesigns lol the ads pay for that. You’re monetized