Black Gold Dual Trac: Step by Step Sight in Process

In this video we show you how to set up the Black Gold Dual Trac. We give an easy step by step process from start to finish. This includes selecting the right sight tapes. Regardless of the model such as the Pro, Mountain Lite, or any other custom built versions, all setup is the same.
Timestamp
00:00 Intro
00:22 Overview
00:53 Mounting and axis adjustment
01:18 Determine default position
01:50 Sight in 20 yard pin
02:46 Windage and Elevation adjustment
03:44 Verify 20 yard pin and mark rail
04:45 Shoot 20 yard pin at 60 yards
06:47 Mark indicator on rail
07:05 Selecting the sight tape
08:14 Setting pin gap
09:37 Figure out the distance
10:33 Align indicator
11:09 Increase your distance
13:02 Conclusion
SUBSCRIBE to S&S Archery for more awesome Gear Reviews and How To's!
/ ssarcheryre. .
Purchase a Black Gold Dual Trac From us here:
sandsarchery.com/collections/...
Follow us on Instagram
@SandSArchery
/ sandsarchery
S&S Archery
Free Shipping.
Expert Advice.
VIP Customer Service.

[@Bozemancurtis]

Helpful. Thank you

[@kain4645]

Just what I needed! Thank you

[@homerson1080]

Thank you! Exactly what I needed to know!

[@enaznhoj]

Good video. Easy to follow instructions. Thank you.

[@Hotloads69]

Great video! Have always enjoyed getting my MBG sights from y'all.

[@EasternWild]

This was perfect. Best Black Gold setup video hands down. Thx bro 🤙🏻🏹

[@SandSArchery]

I appreciate that a ton! Thank you

[@bluej7966]

Thanks for the video. Excellent info!

[@willknott4796]

Just bought one of these from S&S Archery, and can’t wait to start setting it up. Thank you for everything you do to help us out.

[@aarongoeppner413]

Thanks for the video!!!!

[@highboostcreatve]

Sitting here watching site in videos for my black gold site and this notification pops up. This literally could not have been more of a perfectly timed video. 🤘🏻

[@SandSArchery]

Awesome Glad that worked out. Let us know if you have any questions.

[@dwiley1996]

Thank you for your time.

[@alexzamora6700]

I hadnt picked up my bow for months until couple days ago and was really wanting to get my dual trac on point . Perfect timing and Awsome video!

[@boelter354]

This was the exact video I needed. And nice stasche

[@SandSArchery]

Ha thanks 👍

[@patricksutton6449]

Great video on the sight in process for a Black Gold Dual Trac. By far the best and easiest way that I have seen yet. You simplified it for me. Thank you!

[@SandSArchery]

You bet! thanks for watching.

[@lanetaglio]

Awesome 😎👍

[@thomasphillips4562]

Great video. I just purchased my first ever movable sight (dual trac mountain lite) and was a little overwhelmed by the sight in process. However, this video really simplifies things. Thanks so much.

[@seetownwv]

Yeah was looking at one of these thinking you just sold me. I love my Black Gold Rush sight. Been debating on switching to vertical pins.

[@chadeastman4832]

I've been shooting that site for a year now love the site just wish there site tapes went over 100 yards

[@SandSArchery]

Same here been a big fan since they came out.

[@tddeangelo]

Very helpful videos for setting up my Dual Trac. Question- what target is shown in the video? I'd love to get one like it for my yard.

[@SandSArchery]

Thanks for watching. The Target is "365 Archery Target Systems"

[@C.Adams82]

On a 3 pin horizontal, like an ascent verdict, why wouldn't you dial it up all the way to sight in? Basically giving a stopping point back to 20 without looking.

[@SandSArchery]

Typically your bottom pin "40 yards" becomes the floater pin with the single indicator. If you run your sight flush to start you can dial the sight up or down, giving you an exact yardage to shoot. Say you have a 3d target at 27 yards and don't want to pin gap, you can dial up and use your bottom pin and indicator at 27 to shoot that exact distance. We have another video showing this process. kzbin.info/www/bejne/r4Wzf6FnpLGal6s

[@edgrabowski6797]

I have the hoyt rx7 can i use this sight .

[@SandSArchery]

You certainly can. Here is the link. sandsarchery.com/collections/black-gold-sights/products/backcountry-inline-dual-trac

[@graydoncoy193]

If i have a single pin black gold pro, is it possible to convert it to a 2 pin setup without buying a whole new sight ?

[@SandSArchery]

The housing is different on both sights. Unfortunately. The pins are seated differently, I suppose you might be able to drill and tap new threads to accommodate the dual pins but I think that it could be very difficult.

[@dankaczmarek3336]

You could however use a silver sharpie or glo in the dark sight paint to make a second down below on your single pin. Won’t be adjustable but would give you a second distance and you could gap shoot if needed.

[@codigray624]

So that pin gap is going to stay shooting 15 yards difference no matter what distance? Say the first indicator is dialed down to 40 and so the second pin is on 55? Still going to hit the same as they were at 20 and 35?

[@SandSArchery]

The pin gap in the default position at 20 yards is15 yards leaving the second pin at 35. As you dial down to longer distances the pin gap shortens because the yardage on the tape starts to spread the further you get out. So for reference, at 70 yards with the top pointer the pin gap reduces to 11 or 12 yards leaving the bottom pin and indicator shooting at 81-82 yards. Hope that helps.

[@codigray624]

@@SandSArchery makes sense, just wasn't sure if the second pin was only useful at the default position. Glad to hear it can be utilized at any yardage

[@dustinhuddleston964]

What target is that?

[@Ollerman86]

What target are you shooting at?

[@SandSArchery]

Its called 365 Archery.

[@chagvang811]

Why on a different KZbin channel they say that the default is when you level it.

[@SandSArchery]

You would want to level the the sight "default position" on horizontal pinned sights. Mainly because the pin on the dual trac is lower in the housing. Multi pin horizontal sights, the indicator is typically set off of one of the lower pins. An advantage to having the sight level is the ability to dial up towards closer distances. With the dual trac we have a top indicator for the top pin and one for the bottom pin. So really there is no need to dial up to closer distances.

[@chagvang811]

@SandSArchery I have the 3pin pro hunter. They said the default is when we lower the sight when the flat meet the flat is that correct.

[@SandSArchery]

@@chagvang811 yes it is here is a video link that might help you out. kzbin.info/www/bejne/r4Wzf6FnpLGal6s

[@colety04]

what does ur arrow weigh

[@SandSArchery]

right around 460 grains