Black Magic Craft Challenged Facility D20 - 3d Print and Paint an Entire War Game

Is that even possible in 24 hours? In this video, Black Magic Craft challenges Facility D20 to 3d print and paint everything required to play Idols of Torment an all new miniature wargame by Black Magic Craft.
This video was inspired from channels like Nerdforge, Miniac Painting, Boylei Hobby Time, Real Terrain Hobbies, Uncle Jessy, Geek Gaming Scenics, Minibricks craft and Eric's Hobby Workshop.
Get A Free Grimdark Sci-Fi 3D Miniature! Armatis Mors Warrior, by Subscribing to Print Minis email list and additional receive 35% off the store:
www.printminis.co/emailcommun...
Check out Idols of Torment here:
www.idolsoftorment.com/
** Gaahleiri Air Brush**
www.gaahleri.com/?ref=Facilit...
Chitubox Pro Link:
www.chitubox.com/en/index
FACILITY D20 Pateron
/ facilityd20
Instagram:
/ troy_buckle
Facility D20 Facebook:
/ facilityd20

[@BlackMagicCraftOfficial]

Hell yea bud, now I gotta get to the east coast to play with ya!

[@FacilityD20]

Definitely, I'll even show you around the island if you're out this way.

[@BlackMagicCraftOfficial]

@@FacilityD20 can you screech me in?

[@FacilityD20]

@BlackMagicCraftOfficial Yes, that would be a must!

[@michaelmanning5379]

"She's gonna be tough" Spoken like a true Canadian. Beauty, eh?

[@FacilityD20]

😂 really though.

[@Habes]

What a journey. Story telling is amazing! When you started at 12am, I was like whoa he's going all out. Then the next things was, I'm going to sleep 😂 Awesome video Troy. Result is great. Without the video I don't think I would have believed that you did it in 24 hours.

[@FacilityD20]

Haha, that's why I put the time-lapse in at the end for proof!

[@cerisekappes580]

Wow!!!! Impressive!!!!! 😊😊😊

[@FacilityD20]

Thank you!!

[@FacilityD20]

Check out Idols of Torment here: www.idolsoftorment.com/ *** Gaahleiri Air Brush*** www.gaahleri.com/?ref=FacilityD20

[@RPRsChannel]

*_Ohyeah, you made that "Underwater World". I sub'd back then. But YT has that bug that removes subs for me, so I haven't watched any of your videos since._* *_I have re-sub'd._*

[@FacilityD20]

@RPRsChannel That sucks... YT is very difficult as it is, especially when you guys don't even get my videos in your feed. Either way nice to have you back.

[@dawnjackson5773]

Two of my favorite KZbinrs ❤

[@FacilityD20]

Thank you kindly, and thanks for watching.

[@reneesteeves3698]

I really think it would be cool if Jeremy, Troy and maybe Ash Barker from Guerrilla Miniatures, got together for some gaming or panels at a convention. I’m thinking Hal Con or Fan Expo.

[@FacilityD20]

That would be wild! Hopefully you day this YT journey would allow me to do that.

[@JP_Idols_of_Torment]

Awesome! Great achievement and love the paint jobs. Hope you enjoy playing the game!

[@FacilityD20]

Thank you! I definitely will, going to have to bust this out in Halloween too!

[@NatesMiniatures]

Well done mate, that is a lot of work for 24 hours. Crazy man 👌👌

[@FacilityD20]

Thanks Nate!

[@donjuandon]

Great video! I haven't gotten the game to the table yet but these models are some of my favorites. They've just got such a great creepy feel and still really unique. You got more done in 24 hours than I'd pull off in a week! Well done!! Not just a time saver, but I've considered painting up my lost in a monochrome scheme. Maybe a hint of blue or green, but i think going black and white would really add to the feeling of them list and wandering.

[@FacilityD20]

I agree. I mostly went with the flesh tone because i knew i could do it fast and that a brown contrast paint would look good on their robes, too.

[@OverboardDM]

Awesome. Great job Troy

[@FacilityD20]

Thanks Cujo! This was a whirlwind of a day.

[@ITSACRITICAL]

This was awesome to see my friend!! Keep it up- buddy!

[@FacilityD20]

Thanks a ton Crit!

[@Isteak80]

The amount of work and quality given the time constraints is amazing.

[@FacilityD20]

Thanks, it was most definitely a time crunch

[@Tgauchsin]

Well done sir!

[@FacilityD20]

Thank you kindly. It was definitely a lot of 3d printing and painting terrain and minis in 24 hours.

[@Jim-yk9if]

OK, that was impressive, man!

[@FacilityD20]

Well, thanks! It was a lot to pull off.

[@marcoherreras6536]

Awesome work!!

[@FacilityD20]

Thank you

[@GarouGames]

Epic challenge, nice work

[@FacilityD20]

Thanks!!

[@Spark_Chaser]

This looks like a good weekend project. More time, a little less stress.

[@FacilityD20]

Thanks! Good idea more time less stress.

[@Spark_Chaser]

@FacilityD20 I admire the work done like this, as it shows not only what can be done but also how to prioritize the important parts.

[@FacilityD20]

@@Spark_Chaser prioritization is key with a project like this.

[@Slurgical_3D_Terrain_Channel]

Again another great video :) thank you for making it. Love your channel.

[@FacilityD20]

You're welcome, I'm just happy to hear you enjoyed it.

[@donniem7979]

OH really now....Also... get a silicone spatula . Take the build plates off and tilt them... use that spatula to recover a mega amount of uncured resin rather than fill them paper towels full of good resin!

[@FacilityD20]

Thanks, I could definitely conserve my resin a lot better for sure.

[@michaelpatton4012]

You can also use the silicon spatula instead of your finger to check the vat and fep for misprints

[@FacilityD20]

​@@michaelpatton4012True, but sometimes i can pick it off without emptying the vat.

[@Bodkin_Ye_Pointy]

Given the time constraints I get that the paint jobs were basic. I think you could improve the lava look by stippling in some black in the yellow where you see those little lumps. It would give the impression of bits of detritus that is burned but not consumed by the lava. Just throwing it out there.

[@FacilityD20]

I agree, i almost did that too... i was just to tired at that point haha

[@ifreeze1678]

Honestly, You should print a Boeing-777-200ER it would be really cool

[@FacilityD20]

Thay would be cool, my nephew loves airplanes, we would like that as well.

[@goforitpainting]

Cool 👍

[@FacilityD20]

Thanks!

[@LdHrothgar]

I came over from BMC, nice job on the challenge, gives me hope that I won't be painting models and terrain for thousands of hours. ;)

[@FacilityD20]

Thanks, welcome to the madness that is FacilityD20. For sure, you can get a lot done when you put your mind to it.

[@samhoban2509]

Man, first time here. You have such a great hobby space setup. Looks awesome. Also…I have never heard anyone with your accent before ever! What area of Canada are you from?

[@FacilityD20]

Welcome to the Facility! Thanks, it is definitely a great space to work. I am from Newfoundland, Canada.

[@jtrain9926]

Great vid, very impressive turnout! Next time you get a little fail run a tank clean (or exposure test on older printers) with some old support in there to give you a handle. Lets you peel up the fail and also pulls out any loose bits that may be left in there.

[@FacilityD20]

Good call. I was hoping to pluck that little bit out of there without having to empty the vat, I tried for about 5mins off camera, gave up and emptied it.

[@michaelpatton4012]

Are you planning to make a playthrough video of the game with the mini's and board you made? Nice work, going to go pick these up.

[@FacilityD20]

Hard to say, making a game play video is a little hard.... and I'm not sure if the video would be received well. However, game play videos are something i wouls like to do, but since i moved i no longer have any gaming buddies.

[@thomaswilliams5005]

Dang Troy, im gonna have to build one of those lava boards now

[@FacilityD20]

Go for it. It was actually very easy and fast. You could do it in a few hours for sure.

[@ilyabelomy8090]

Any update on the Kirin DSP? Why didn't you use it to print minis in the challenge?

[@FacilityD20]

I was going to use it on this project actually, but then I ended up only needing to use 2 printers. I am going to try to use it again on my next resin project.

[@Slurgical_3D_Terrain_Channel]

Hey I’m a Canadian creator as well. Brand new into my journey.

[@FacilityD20]

Nice. Shoot me an email, there is a discord server that you can join with a bunch of other hobby KZbinrs that can support and help out. I will send you the link.

[@yukyimlau7852]

can you please make phobies in 3d please

[@FacilityD20]

Honestly, I am not sure what that is?

[@yukyimlau7852]

it a game