This video is a "how to" instructional video on how to black out your front forks. Fork Boots: amzn.to/2DYDVww Wrap: amzn.to/2DWVfSP Milwaukee Impact: amzn.to/2VppgW0
Пікірлер: 39
@Kronos5.6 Жыл бұрын
Wow very quick informative video, I just bought a 48 and the forks are an eyesore in chrome when the rest of the bike is almost all black😂 this is pretty much exactly what I want thanks!
@Lipan_Motovlog4 жыл бұрын
Hi from Malaysia.. looks very nice. Im searching for this " how to do... " and found your video.. good and usefull info.. i will do mine..
@sawyerramos3113 Жыл бұрын
thanks for the links
@NortonUnofficial Жыл бұрын
Very helpful, just what I was looking for. Thank you
@714thegooch2 жыл бұрын
A little Astroglide works wonders on those boots.
@allankarrer72832 жыл бұрын
Thanks, Im just about to do same to my 2016 fxdls. Now I have a plan!
@Cbrmansc774 жыл бұрын
Looks 100% better, I'm looking to do this on my indian scout
@jamespolucha8790 Жыл бұрын
Nice job I did this to a sportster I have and getting ready to do my dyna
@hotrod76.3 жыл бұрын
Thanks bro
@Frenchysmokes2 жыл бұрын
Everyone I’ve seen with a sportster has the same led headlight including myself
@prawny120093 жыл бұрын
I might try some 41/40mm push fit black waste pipe, should be snug and look chunky.
@KnightBobber Жыл бұрын
Thanks
@marcogonzalez3736 Жыл бұрын
what type of wraps are those ? The link is incorrect
@fifthdimension3263 жыл бұрын
Can you make a video that shows how you stabilized and lifted your bike? How much is the hydraulic lift?? How much$ is the thing in the back to stabilize it while you are working on it?
@BustedTech12 жыл бұрын
Go and buy all the tools you need the return them when ur done
@paraxo7192 Жыл бұрын
I know this is a lot later, but I use a motorcycle lift that cost me about 150$ online and then two car jack stands on each side of my rear tire. If I need to remove the rear tire I stabilize the bike with a strap to an anchor point so it doesnt shift hard when the back wheel comes off while kind of supported by it.
@bobster_8833 жыл бұрын
The Amazon link is no longer working, what did you search for to find those wraps. I need them for my 2018 883.
@eriksgarage89273 жыл бұрын
I'm sorry about that, here is a link. www.amazon.com/SATIN-BLACK-Application-Vinyl-Vehicle/dp/B078X3K11C/ref=sr_1_1_sspa?dchild=1&keywords=3m+vinyl+wrap&qid=1630363125&sr=8-1-spons&psc=1&smid=A732MSRHC9CSJ&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzNERVOUlLNlg3MExBJmVuY3J5cHRlZElkPUEwNzQ3MzM3MkRXSkdaSFJaSVFDTiZlbmNyeXB0ZWRBZElkPUEwMDE3ODc1MkszVzk1M1JGRzJMOSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
@navi86ca3 жыл бұрын
Can you write it down torque for each part that needs to be taken off. Thanks
@Aaron.Himself3 жыл бұрын
Lol Yeah, then after you’re done tucking in King singh for beddy-bye night night, I’m going to need you to come to my house and read my owners manual to me aloud. Don’t forget to take quality notes. Typed of course. Don’t hand it in to me until it’s perfect. I will test your knowledge retention by having you perform the job on my bike. Thanks… And one more thing. Do you clean windows?
@navi86ca3 жыл бұрын
@@Aaron.Himself you are funny dude! I got my hands on manual and all figured out. Good video and yes I do clean windows for the right price or torque specs lol
@willrizer62103 жыл бұрын
Where did you get the wrap from ?
@eriksgarage89273 жыл бұрын
Amazon this is the link: VViViD Gloss Black Vinyl Wrap Adhesive Film Air Release Decal Sheet (1.5ft x 5ft) www.amazon.com/dp/B08GKY962M/ref=cm_sw_r_cp_api_i_9u2IFb6BZTGAN
@juanmaza8575 Жыл бұрын
I’m in the process of doing the same 👍
@awedihdaira27864 жыл бұрын
Are those rubber fork cover genuine hd or aftermarket ? Thanks
@eriksgarage89274 жыл бұрын
No Sir they are Bikers Choice from Amazon. Biker'S Choice Bc 49Mm Blk Short Fork Boots 666767 www.amazon.com/dp/B00T6JHZI6/ref=cm_sw_r_cp_api_i_QlJUEbY53GWQN
@joselogonzalez5393 жыл бұрын
That vinyl be on the way next time you remove them?
@eriksgarage89273 жыл бұрын
Exactly the reason I put car wrap so I could just rip it off and redo it if it had any issues, imagine having paint it would get all scratched. Also realistically you rarely have to pull the front forks.
@Fredrickhair3 жыл бұрын
How does it hold up after riding?
@eriksgarage89273 жыл бұрын
It holds up great, I have had no issues.
@Fredrickhair3 жыл бұрын
@@eriksgarage8927 I painted my forks and powder coated the frame, various engine parts and the rims. Ive had no issues with my powdercoated parts, but my painted forks are scratched up and parts are chipping. I think this might be a good solution. Thank you for your response!
@eriksgarage89273 жыл бұрын
Yeah no issue and yeah as many rocks are on the road this is definitely the way to go. It’s cheap and you can literally peel it off and then put a new one on.
@matthewa69664 жыл бұрын
like the idea , but what is the handlebars you put on , how high are the 14 inches ?
@eriksgarage89274 жыл бұрын
It’s a khrome Werks sissy bar, don’t forgot they sell the back plate separate, Also it’s a 12” rise.
@matthewa69664 жыл бұрын
@@eriksgarage8927 , what height are those handlebars , do you have a like for them , thanks
@matthewa69664 жыл бұрын
link for them
@eriksgarage89274 жыл бұрын
Hey Matthew the link is under my other video in the description: kzbin.info/www/bejne/mnm9hoCiba6Wbqc