BLACKFIRE One Step - Autogeek Testing Review

SCOTT WITH DALLAS PAINT CORRECTION & AUTO DETAILING IN PLANO TEXAS TESTS BLACKFIRE ONE STEP A ALL-IN-ONE POLISH FROM AUTOGEEK
Products Used:
Blackfire Pro Detailers Choice BF-900 One Step, 32 oz. - amzn.to/2VXDo7T
HIGH QUALITY MICROFIBER TOWELS FOR AUTO DETAILING
luxurymicrofib...

[@J1Z06]

I tried this on My Dad's Toyota Yaris. Terrific results, I couldn't be happier with how effortless this was to use! A breeze to apply and remove. Thank You, Mike Phillips for sending Me some :)

[@MyGuyKirby]

Good to hear, I think I did too many passes and over heated a LC Force orange pad. But it did a nice shine on the red paint.

[@klasseact6663]

Honest review, as usual and Scott apologized as well, still doesn't explain as to why they said it needed to be tested before it's to be released when it's already out there?

[@evo8power]

Thinking the same thing lol

[@jonathantaylor1458]

Love the videos! Would love to see you test and give your honest opinion on some of Garry Dean's products, seems like a good next group of products to test after you did all the Drive product testing. Keep up the great work!

[@milanjurich1526]

How does this compare to Drive Auto’s products such as Victory Nano Polish & Seal? You prefer it over theirs? If you’ve tried it, is it also no dusting?

[@deepsquat600]

Thanks..always wondered about Blackfire ..

[@ryanhubble9157]

Scott i love the help you provide on here. i have scratchs and swirls on black powder coated wheels any tips or tricks how to remove them?

[@BetweenTwoForks]

have you compared it with 3D one? I'm looking to get a one step, so would love to hear your thoughts!

[@ScotWalt858]

Nice review. Thanks. Will have to give it a try.

[@zacharybryson2945]

What spray wax would you recommend with this or would something like Collinite 845 be better?

[@marcumdjm02]

Do you have a video link to the order in which detail work is done and maybe even a verbal explanation to each part? I mean like first you wash the. Car and next you wash the wheel welds or whatnot. I mean can you explain the order in which a pro gives a car the works from Start to finish?

[@MrIvan00pr]

I've used it in direct sunlight with no issues to report so far

[@brad_neal]

Great video!! How does the all-in-one differ from the Blackfire Total Polish & Seal?

[@roberthenn3722]

I notice that you stopped using the Harbor Freight DA polisher in your videos. Have you stopped using it after making videos telling us how good it is? Love the videos and your honesty. Keep it up.

[@dallaspaintcorrectionautod8343]

I still use it in my business almost daily.. I feel I have discussed it enough and I don't want to bore people with more videos:) I also use a rotary daily plus long throws but for a basic AIO just about any dual action polisher will work.. Thanks for the comment.. Much love and thanks for the kind words

[@mikekniess9937]

Love your videos Scott thanks for making them their a new 1 step by angle wax and it is all in one Brian from apex good stuff dose good job.

[@dallaspaintcorrectionautod8343]

I have tried it and it was ok.. It's not sunlight friendly plus it's wipe up is a little poor:( I just use a AIO as a paint enhancement service and the cost of angelwax is a bit high for it's overall performance:(

[@fenwaymark]

Blackfire Spray Sealant is probably the most user friendly spray sealant I’ve ever used. Haven’t tried the AIO, so I’ll be watching your future thoughts. Any pad color staining from it?

[@urbanedgeautodetailing]

If it feels like it has a little grab when wiping off, give it a minute to dry to a haze as it has a sealant in it.

[@luiscuadrado3646]

Hey Scott love you videos learning a lot can you show how to go around the badges name plates when buffing or waxing with the machine

[@teuvojormanainen6543]

Scott, what is your opinion on using window cleaner as paint prep? Thank you for the valuable info!

[@bigd9848]

Looks like a great product 👍🏻I love my Adams polish products but will try this.Thanks

[@asanchez3532]

Backfire one step works very well

[@TheNotimprezed]

Scott, do you know any/which AIO use polishing abrasives instead of diminishing abrasives? I'm finding the diminishing abrasives are not the answer to adding shine and gloss to well cared for paint. They have to be worked too long to finish down, especially on black paint (hard black in my case). They leave the paint with a haze/light cloudiness if not worked through 6 or 8 passes. I find myself just grabbing polish and topping with a sealant when finished. The paint ends up looking better with 3-4 passes of polish vs 8 of the AIO, with about the same defect removal but far more gloss.

[@megalos1631]

Scott, Can you use Meg's Ultimate tires gel on rubber window lining and plastic trim? If not what product do you recommend?

[@alanbrown8064]

Great video on the AIO. Love the Microfiber Yellow...Can you tell me about it ?? Thanks

[@seamuslily]

Scott ,which aio do you like the most to work with.

[@paulff3]

Pros like HD Speed. Fast, works, easy. Can't top with sealant though.

[@davidadler5758]

Would this remove water spots if applied by hand?

[@groundcontrol6876]

I didn’t know you could create holograms with a dual action 🤔. Haze yeah, but I’ve only caused holograms on paint with the rotary.

[@dallaspaintcorrectionautod8343]

Yes a dual action polisher can create holograms, it's typically seen when an aggressive pad is used on soft paints or when the lubrication within a polish is poor.. It happens more with a rotary but you can also see it with a dual action polisher as well:)

[@jwchoi2843]

is it best product???

[@patricktuggles4815]

Should we expect a review of the HD ONE hybrid compound/polish AIO?

[@allthingscanbefixed]

So your using a new pad and saying no dust off the one step lol, so why aren't you using a flex polisher? New to your channel

[@RNagore1]

Great Testing I use HD SPEED I never tried this

[@tommartin1223]

I use angel wax enigma AIO

[@dallaspaintcorrectionautod8343]

@@tommartin1223 Angel wax is ok but it's not mobile detailing friendly, not sunlight friendly, wipe off is poor and the cost is very high for just a paint enhancement product:(

[@marioskosmidhs9454]

Please dear scott have you any experience with the menzerna 3-1? it is availiable to europe in 30euro for 32oz!!!

[@malmurphy2879]

marios kosmidhs I use the Menzerna 3 in 1. It has a VERY long working time before it breaks down though.

[@marioskosmidhs9454]

@@malmurphy2879 thank you sir for your help. How about its cutting ability and protection? What is your experience sir??? Kind reegards from Athens Greexe

[@malmurphy2879]

marios kosmidhs depends on what you are looking to do. It’s ok for light/to moderate defects. Try a foam and microfiber pad for soft or harder paints. Good with a DA or rotary. I use it on headlights to clean up after True Grit. It polished B pillars well with a rotary. Also I have used it to go over plastic trim and plastic B pillars by hand. Experiment with it. Long working time is a turn off for me at times.

[@marioskosmidhs9454]

@@malmurphy2879 thank you sir this.product is availiable in very good prises in my country i like AIO as a entry level service for daily drivers i will try it next week ..THANKS again sir for helping me

[@marioskosmidhs9454]

Interesting, dear Scott i didnt know, that even an AIO can produse holograms why this happenning? It is the technik? it is the wrong pads? and how we avoid it? Only with expririence? i thought that ONLY with rotary we can produse holograms.....!!!!

[@robertb9838]

Hey scott can you test 3D one and let us know your professional opinion of the product

[@robertb9838]

Its from the same guys who make HD speed

[@salmanslim]

Pbmg lol .. love the Tshirt. You the pro , bro. Cinnamon crunch.

[@rickmarsh8199]

Compared to Meg’s 166?

[@johnmika4579]

Do a test on collinites new aio 325!

[@edheinz320]

If you sent him a bottle he might...

[@mariozombie2843]

DECENT

[@davidlevin5361]

Hey Scott! What is ONR? Thanks!

[@gufiaito69able]

Optimum No Rinse

[@kikcodog]

I keep thinking that big old nasty scratch on the left is a big old bird dropping. Looks just like it!

[@bobdylan9117]

my big old bird is offended at your remark. she made me type this. HELP, I'm captive!

[@mback12000]

You can feel sub micron with your fingers? Lol. A micron is 40 millionths of an inch. Your fingers must be registered with the National Institute of Standards and Technology. Lol

[@edheinz320]

After you said that they lied to you to get you to test their product. I personally wouldn't buy anything from them...